ipq40xx: add support for GL.iNet GL-B2200

[openwrt/openwrt.git] / target / linux / ipq40xx / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 8df7990f2e4d829641c03be073f2c71cf63df945..8924fb3258fae652b26d033de901d806d0a8e279 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -9,10 +9,13 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/cal-pci-0000:01:00.0.bin")
        case "$board" in
+       glinet,gl-b2200)
+               caldata_extract "ART" 0x9000 0x2f20
+               ;;
        meraki,mr33)
                caldata_extract_ubi "ART" 0x9000 0x844
                caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
-               ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
+               ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1)
                ;;
        esac
        ;;
@@ -36,14 +39,23 @@ case "$FIRMWARE" in
                ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x32)
                ;;
        engenius,eap2200 |\
-       openmesh,a62)
+       openmesh,a62 |\
+       plasmacloud,pa2200)
                caldata_extract "0:ART" 0x9000 0x2f20
                ;;
-       linksys,ea8300)
+       linksys,ea8300 |\
+       linksys,mr8300)
                caldata_extract "ART" 0x9000 0x2f20
                # OEM assigns 4 sequential MACs
                ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
                ;;
+       netgear,rbr50|\
+       netgear,rbs50|\
+       netgear,srr60|\
+       netgear,srs60)
+               caldata_extract_mmc "0:ART" 0x9000 0x2f20
+               ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x12)
+               ;;
        esac
        ;;
 "ath10k/pre-cal-ahb-a000000.wifi.bin")
@@ -53,10 +65,14 @@ case "$FIRMWARE" in
        alfa-network,ap120c-ac |\
        cilab,meshpoint-one |\
        ezviz,cs-w3-wd1200g-eup |\
+       glinet,gl-ap1300 |\
        glinet,gl-b1300 |\
+       glinet,gl-b2200 |\
        glinet,gl-s1300 |\
        linksys,ea6350v3 |\
        mobipromo,cm520-79f |\
+       p2w,r619ac-64m |\
+       p2w,r619ac-128m |\
        qcom,ap-dk01.1-c1)
                caldata_extract "ART" 0x1000 0x2f20
                ;;
@@ -93,15 +109,24 @@ case "$FIRMWARE" in
        cellc,rtl30vw |\
        compex,wpj419 |\
        compex,wpj428 |\
+       edgecore,ecw5211 |\
+       edgecore,oap100 |\
        engenius,eap1300 |\
        engenius,eap2200 |\
+       luma,wrtq-329acn|\
        openmesh,a42 |\
        openmesh,a62 |\
+       plasmacloud,pa1200 |\
+       plasmacloud,pa2200 |\
        qxwlan,e2600ac-c1 |\
        qxwlan,e2600ac-c2 |\
        unielec,u4019-32m)
                caldata_extract "0:ART" 0x1000 0x2f20
                ;;
+       devolo,magic-2-wifi-next)
+               caldata_extract "ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
+               ;;
        dlink,dap-2610)
                caldata_extract "ART" 0x1000 0x2f20
                ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
@@ -116,21 +141,38 @@ case "$FIRMWARE" in
                ;;
        engenius,ens620ext)
                caldata_extract "ART" 0x1000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
                ;;
-       linksys,ea8300)
+       linksys,ea8300 |\
+       linksys,mr8300)
                caldata_extract "ART" 0x1000 0x2f20
                ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
                ;;
        meraki,mr33)
                caldata_extract_ubi "ART" 0x1000 0x2f20
                caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
+               ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2)
+               ;;
+       mikrotik,hap-ac2 |\
+       mikrotik,hap-ac3)
+               wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+               ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
+               ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
+               ;;
+       netgear,rbr50|\
+       netgear,rbs50|\
+       netgear,srr60|\
+       netgear,srs60)
+               caldata_extract_mmc "0:ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
+               ;;
+       netgear,wac510)
+               caldata_extract "0:ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary "0:MANUDATA" 0x6)
                ;;
-       netgear,ex6100v2 |\
-       netgear,ex6150v2)
-               caldata_extract "ART" 0x1000 0x2f20
-               ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
+       teltonika,rutx10)
+               caldata_extract "0:ART" 0x1000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
                ;;
        zyxel,nbg6617 |\
        zyxel,wre6606)
@@ -146,10 +188,14 @@ case "$FIRMWARE" in
        alfa-network,ap120c-ac |\
        cilab,meshpoint-one |\
        ezviz,cs-w3-wd1200g-eup |\
+       glinet,gl-ap1300 |\
        glinet,gl-b1300 |\
+       glinet,gl-b2200 |\
        glinet,gl-s1300 |\
        linksys,ea6350v3 |\
        mobipromo,cm520-79f |\
+       p2w,r619ac-64m |\
+       p2w,r619ac-128m |\
        qcom,ap-dk01.1-c1)
                caldata_extract "ART" 0x5000 0x2f20
                ;;
@@ -157,7 +203,7 @@ case "$FIRMWARE" in
        aruba,ap-303h |\
        aruba,ap-365)
                caldata_extract "ART" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) 1)
                ;;
        asus,map-ac2200)
                caldata_extract_ubi "Factory" 0x5000 0x2f20
@@ -186,44 +232,71 @@ case "$FIRMWARE" in
        cellc,rtl30vw |\
        compex,wpj419 |\
        compex,wpj428 |\
+       edgecore,ecw5211 |\
+       edgecore,oap100 |\
        engenius,eap1300 |\
        engenius,eap2200 |\
+       luma,wrtq-329acn|\
        openmesh,a42 |\
        openmesh,a62 |\
+       plasmacloud,pa1200 |\
+       plasmacloud,pa2200 |\
        qxwlan,e2600ac-c1 |\
        qxwlan,e2600ac-c2 |\
        unielec,u4019-32m)
                caldata_extract "0:ART" 0x5000 0x2f20
                ;;
+       devolo,magic-2-wifi-next)
+               caldata_extract "ART" 0x5000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
+               ;;
        dlink,dap-2610)
                caldata_extract "ART" 0x5000 0x2f20
                ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
                ;;
        engenius,emd1)
                caldata_extract "0:ART" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) +1)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1)
                ;;
        engenius,emr3500)
                caldata_extract "0:ART" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1)
                ;;
        engenius,ens620ext)
                caldata_extract "ART" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
                ;;
-       linksys,ea8300)
+       linksys,ea8300 |\
+       linksys,mr8300)
                caldata_extract "ART" 0x5000 0x2f20
                ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
                ;;
        meraki,mr33)
                caldata_extract_ubi "ART" 0x5000 0x2f20
                caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
+               ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3)
+               ;;
+       mikrotik,hap-ac2 |\
+       mikrotik,hap-ac3 |\
+       mikrotik,sxtsq-5-ac)
+               wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+               ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
+               ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
+               ;;
+       netgear,rbr50|\
+       netgear,rbs50|\
+       netgear,srr60|\
+       netgear,srs60)
+               caldata_extract_mmc "0:ART" 0x5000 0x2f20
+               ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
+               ;;
+       netgear,wac510)
+               caldata_extract "0:ART" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) 16)
                ;;
-       netgear,ex6100v2 |\
-       netgear,ex6150v2)
-               caldata_extract "ART" 0x5000 0x2f20
-               ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
+       teltonika,rutx10)
+               caldata_extract "0:ART" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
                ;;
        zyxel,nbg6617 |\
        zyxel,wre6606)