Daniel Golle [Fri, 19 Mar 2021 13:30:16 +0000 (13:30 +0000)]
fstools: update to git HEAD
964d1e3 partname: allow skipping existing 'rootfs_data' partition
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Álvaro Fernández Rojas [Fri, 19 Mar 2021 09:59:07 +0000 (10:59 +0100)]
bmips: backport b53 mmap device tree support
This patch has been accepted upstream for linux v5.13.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Fri, 19 Mar 2021 09:53:51 +0000 (10:53 +0100)]
bmips: backport b53 legacy tags support
These patches have been accepted upstream for linux 5.13.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Thu, 18 Mar 2021 16:49:52 +0000 (17:49 +0100)]
bmips: backport upstream dsa b53 is63xx patch
This patch has been accepted for linux v5.13.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Rosen Penev [Wed, 30 Dec 2020 00:05:40 +0000 (16:05 -0800)]
kexec-tools: update to 2.0.21
kdump was removed in
7acd257ae67b4ca94f8c23cb8bda0ee0709b9216
gdb can be used as an alternative.
Remove autoreconf. It's not needed as the configure files are already
generated.
Remove upstreamed patch.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 6 Mar 2021 22:17:45 +0000 (14:17 -0800)]
binutils: fix compilation with ccache
For some reason, one of the configure checks results in some infinite
loop and ends up spawning endless gcc processes, causing OOM. Just pass
a configure var to avoid it.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Ilya Lipnitskiy [Mon, 8 Mar 2021 03:31:50 +0000 (19:31 -0800)]
ramips: move spi-nor-add-gd25q512 patch to generic
A SPI NOR flash should not be target-specific, so move it to generic in
case another platform needs to use it.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Rui Salvaterra [Mon, 8 Mar 2021 15:28:51 +0000 (15:28 +0000)]
mac80211: rtl: update RTL8821AE PHY/RF parameters
Create a new directory for Realtek patches and backport the updated PHY and RF
parameters patch. Improves the connectivity in the 5 GHz band [1].
[1] https://patchwork.kernel.org/project/linux-wireless/patch/
20210219052607.7323-1-pkshih@realtek.com/#
23988567
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Supriya Mane [Tue, 9 Mar 2021 08:58:52 +0000 (14:28 +0530)]
x86/64: Iptables seems to lack support for cgroup v2
FS#3574
Adding cgroup support enables adding rules on processes
to limit resources in terms of iptable policies
Signed-off-by: Supriya Mane <sm.supriya@globaledgesoft.com>
Russell Senior [Tue, 16 Mar 2021 08:24:18 +0000 (01:24 -0700)]
busybox: udhcpc, allow zero length dhcp options
This patch skips zero length DHCP options instead of failing.
Signed-off-by: Russell Senior <russell@personaltelco.net>
Lech Perczak [Sun, 28 Feb 2021 02:24:19 +0000 (03:24 +0100)]
rampis: use lzma-loader for ZTE MF283+
Without that, after merging support to master, the device fails to boot
due to LZMA decompression error:
3: System Boot system code via Flash.
## Booting image at
bc080000 ...
raspi_read: from:80000 len:40
. Image Name: MIPS OpenWrt Linux-5.4.99
Created: 2021-02-25 23:35:00 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size:
1786664 Bytes = 1.7 MB
Load Address:
80000000
Entry Point:
80000000
raspi_read: from:80040 len:1b4328
............................ Verifying Checksum ... OK
Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover
Use lzma-loader to fix it.
Fixes: 59d065c9f81c ("ramips: add support for ZTE MF283+")
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Shiji Yang [Mon, 1 Mar 2021 06:35:12 +0000 (14:35 +0800)]
ramips: improve GPIO pin control for HC5x61
HC5661 does not have USB port, remove usb power control pin.
HC5x61 do not have LAN LEDs, remove ethernet LED control pin.
Only HC5861 has PA in 2.4G channel.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Tony Ambardar [Mon, 15 Mar 2021 23:11:27 +0000 (16:11 -0700)]
tools/sparse: update to version 0.6.3
Update to the latest stable release.
This fixes a segfault and build failure seen compiling the 5.10 kernel
for x86/64. With this update, builds complete and sparse generates the
usual large volume of warnings as on 5.4 kernels.
Reported-by: Javier Marcet <javier@marcet.info>
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Aleksander Jan Bajkowski [Fri, 5 Mar 2021 17:41:30 +0000 (18:41 +0100)]
kernel: move some disabled symbols to generic
Move some disabled symbols found in armvirt target to generic.
Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
Eike Ritter [Sun, 14 Mar 2021 18:50:21 +0000 (18:50 +0000)]
ppp: compile fix: unset FILTER variable in Makefile
If the environment variable FILTER is set before compilation,
compilation of the ppp-package will fail with the error message
Package ppp is missing dependencies for the following libraries:
libpcap.so.1
The reason is that the OpenWrt-patch for the Makefile only comments
out the line FILTER=y. Hence the pcap-library will be dynamically
linked if the environment variable FILTER is set elsewhere, which
causes compilation to fail. The fix consists on explicitly unsetting
the variable FILTER instead.
Signed-off-by: Eike Ritter <git@rittere.co.uk>
Aleksander Jan Bajkowski [Wed, 3 Mar 2021 21:46:50 +0000 (22:46 +0100)]
lantiq: set maximum kernel size for ARV7519RW22
Some users report that current snapshot producies non-bootable images.
Stock uboot can boot images if the kernel is smaller than 2MB.
Set maximum kernel size and disable image building for this board.
Ref: https://forum.openwrt.org/t/astoria-arv7519rw22-bootloops-after-upgrade/89843
Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
Felix Fietkau [Thu, 18 Mar 2021 06:22:11 +0000 (07:22 +0100)]
build: use -nostdinc and -isystem in NOSTDINC_FLAGS for out-of-tree kernel modules
This resolves issues uncovered by musl updates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 18 Mar 2021 09:51:05 +0000 (10:51 +0100)]
mt76: update to the latest version
0b6c9a043f78 mt76: move de-amsdu buffer per-phy
48a905e23791 mt76: mt7615: fix CSA event format
fbef8bba038f mt76: mt7921: remove duplicated macros in mcu.h
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle [Thu, 18 Mar 2021 04:18:05 +0000 (04:18 +0000)]
uboot-mediatek: don't rely in 'lzma' cmdline
Use 'xz --format=lzma' instead.
Fixes build for mt7629.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
David Bauer [Wed, 17 Mar 2021 23:56:02 +0000 (00:56 +0100)]
mediatek: fix broken UniFi 6 LR image
Ubiquiti's own bootloader expects the configuration mode to be present
with a "@" instead of a "-" for the sperator character. Otherwise
booting of the image fails.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Wed, 17 Mar 2021 23:54:25 +0000 (00:54 +0100)]
ramips: fix broken UniFi 6 Lite image
Ubiquiti's own bootloader expects the configuration mode to be present
with a "@" instead of a "-" for the sperator character. Otherwise
booting of the image fails.
Signed-off-by: David Bauer <mail@david-bauer.net>
Hauke Mehrtens [Mon, 15 Mar 2021 17:40:14 +0000 (18:40 +0100)]
mediatek: Fix writing U-Boot env on Buffalo WSR-2533DHP2
This fixes writing to the U-Boot environment by making the partition
writable and setting the correct flash sector size of 128K.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Daniel Golle [Wed, 17 Mar 2021 22:36:58 +0000 (22:36 +0000)]
uboot-mediatek: fix default environment of bpi-r64 emmc
The emmc variant used the default environment of the sdmmc variant.
Fix that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 17 Mar 2021 17:39:46 +0000 (17:39 +0000)]
uboot-mediatek: bpi-r64: make use of FIT configuration selection
Allow selecting either SATA or PCIE functionality using uImage.FIT
configurations and device-tree overlays.
By default, PCIE1 is selected (as it has been before this change).
To select SATA instead, you can do this now:
fw_setenv bootconf config-mt7622-bananapi-bpi-r64-sata
and reboot.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 17 Mar 2021 17:36:54 +0000 (17:36 +0000)]
mediatek: bpi-r64: use dt-overlay to select SATA or PCIE1
The Bananapi BPi-R64 got a SATA interface which cannot be used at the
same time as the second mPCIe slot. The decission is made by hogging
GPIO 90.
Embed two addtional DT overlay blobs into the image to allow bootloader
selection of either SATA or PCIE1 feature.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 17 Mar 2021 17:30:48 +0000 (17:30 +0000)]
include/image*: add support for device-tree overlays
Add new target feature 'dt-overlay' which makes DTC keep the symbol
names in the generated dtb.
Make sure additional DT overlay sources specified by the new device
variable DEVICE_DTS_OVERLAY get compiled together with the main DTS
(currently overlays got to be in the same folder). Let Build/fit pass
the generated DT overlay blobs to mkits.sh.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 17 Mar 2021 17:27:55 +0000 (17:27 +0000)]
scripts/mkits.sh: add support for adding DT overlay blobs to image
Allow adding multiple device tree overlay blobs to an image and
generate configurations for each of them.
This is useful on boards with modern U-Boot which allow e.g. user-
configurable peripherals ("shields") in that way.
Note that currently, each generated configuration adds exactly one
overlay on top of the base image, ie. adding multiple overlays at the
same time is not yet supported.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 17 Mar 2021 03:39:51 +0000 (03:39 +0000)]
ath79: fix RS-485 on Teltonika RUT-955
DTR GPIO isn't actually needed and triggers boot warning.
TX pin was off by one (GPIO 19 instead of GPIO 18).
Reported-by: @tophirsch
Fixes: d1130ad265 ("ath79: add support for Teltonika RUT955")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tony Ambardar [Fri, 19 Feb 2021 06:52:20 +0000 (22:52 -0800)]
malta: prune subtarget configs
Drop autogenerated kernel config options. These aren't needed to build and
can obscure options relevant to the subtarget.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Tony Ambardar [Wed, 17 Feb 2021 08:12:44 +0000 (00:12 -0800)]
malta: update kernel 5.10 configs
Update generic config to add missing options that prompt during builds. Run
"make kernel_oldconfig" to refresh malta target config.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Tony Ambardar [Wed, 17 Feb 2021 06:08:02 +0000 (22:08 -0800)]
malta: support kernel 5.10
Add linux 5.10 as testing kernel and copy generic config from 5.4.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Bjørn Mork [Sat, 13 Mar 2021 16:45:54 +0000 (17:45 +0100)]
realtek: enable SerDes NWAY and SGMII negotiation
This allows copper SFPs to negotiate speeds lower than 1gig.
Acked-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Bjørn Mork [Sat, 13 Mar 2021 16:45:53 +0000 (17:45 +0100)]
realtek: enabled Marvell and Realtek PHYs
The rtl83xx-phy driver is necessary for proper configuration of the
PHYs if U-Boot hasn't done that.
1000Base-T SFPs often contains a Marvell
88E1111 and will not work
without this driver. Include it by default to support copper SFPs.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Bjørn Mork [Sat, 13 Mar 2021 16:45:52 +0000 (17:45 +0100)]
realtek: enable HWMON for SFP sensors
This adds SFP sensors as a hwmon device, allowing readout of
temperatures, DOM and other sensor readings available from the
SFP. Example from a ZyXEL GS1900-10HP with a DOM capable
1000Base-SX SFP:
root@gs1900-10hp:~# grep . /sys/class/hwmon/hwmon0/*
/sys/class/hwmon/hwmon0/curr1_crit:90
/sys/class/hwmon/hwmon0/curr1_crit_alarm:0
/sys/class/hwmon/hwmon0/curr1_input:4
/sys/class/hwmon/hwmon0/curr1_label:bias
/sys/class/hwmon/hwmon0/curr1_lcrit:0
/sys/class/hwmon/hwmon0/curr1_lcrit_alarm:0
/sys/class/hwmon/hwmon0/curr1_max:85
/sys/class/hwmon/hwmon0/curr1_max_alarm:0
/sys/class/hwmon/hwmon0/curr1_min:0
/sys/class/hwmon/hwmon0/curr1_min_alarm:0
/sys/class/hwmon/hwmon0/in0_crit:3795
/sys/class/hwmon/hwmon0/in0_crit_alarm:0
/sys/class/hwmon/hwmon0/in0_input:3317
/sys/class/hwmon/hwmon0/in0_label:VCC
/sys/class/hwmon/hwmon0/in0_lcrit:2805
/sys/class/hwmon/hwmon0/in0_lcrit_alarm:0
/sys/class/hwmon/hwmon0/in0_max:3465
/sys/class/hwmon/hwmon0/in0_max_alarm:0
/sys/class/hwmon/hwmon0/in0_min:3135
/sys/class/hwmon/hwmon0/in0_min_alarm:0
/sys/class/hwmon/hwmon0/name:sfp_p10
/sys/class/hwmon/hwmon0/power1_crit:708
/sys/class/hwmon/hwmon0/power1_crit_alarm:0
/sys/class/hwmon/hwmon0/power1_input:259
/sys/class/hwmon/hwmon0/power1_label:TX_power
/sys/class/hwmon/hwmon0/power1_lcrit:89
/sys/class/hwmon/hwmon0/power1_lcrit_alarm:0
/sys/class/hwmon/hwmon0/power1_max:501
/sys/class/hwmon/hwmon0/power1_max_alarm:0
/sys/class/hwmon/hwmon0/power1_min:126
/sys/class/hwmon/hwmon0/power1_min_alarm:0
/sys/class/hwmon/hwmon0/power2_crit:1259
/sys/class/hwmon/hwmon0/power2_crit_alarm:0
/sys/class/hwmon/hwmon0/power2_input:404
/sys/class/hwmon/hwmon0/power2_label:RX_power
/sys/class/hwmon/hwmon0/power2_lcrit:6
/sys/class/hwmon/hwmon0/power2_lcrit_alarm:0
/sys/class/hwmon/hwmon0/power2_max:794
/sys/class/hwmon/hwmon0/power2_max_alarm:0
/sys/class/hwmon/hwmon0/power2_min:10
/sys/class/hwmon/hwmon0/power2_min_alarm:0
/sys/class/hwmon/hwmon0/temp1_crit:100000
/sys/class/hwmon/hwmon0/temp1_crit_alarm:0
/sys/class/hwmon/hwmon0/temp1_input:22547
/sys/class/hwmon/hwmon0/temp1_label:temperature
/sys/class/hwmon/hwmon0/temp1_lcrit:-50000
/sys/class/hwmon/hwmon0/temp1_lcrit_alarm:0
/sys/class/hwmon/hwmon0/temp1_max:85000
/sys/class/hwmon/hwmon0/temp1_max_alarm:0
/sys/class/hwmon/hwmon0/temp1_min:-40000
/sys/class/hwmon/hwmon0/temp1_min_alarm:0
/sys/class/hwmon/hwmon0/uevent:OF_NAME=sfp-p10
/sys/class/hwmon/hwmon0/uevent:OF_FULLNAME=/sfp-p10
/sys/class/hwmon/hwmon0/uevent:OF_COMPATIBLE_0=sff,sfp
/sys/class/hwmon/hwmon0/uevent:OF_COMPATIBLE_N=1
Tested-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Bjørn Mork [Sat, 13 Mar 2021 16:45:51 +0000 (17:45 +0100)]
realtek: re-enable sfp driver for ZyXEL GS1900-10HP
There is no need to define a static link or a phy for the sfp
ports. Using phy-mode and managed properties to describe the
link to the sfp phy.
We have to keep the now unconnected virtual "phys" because the
switch driver uses their "phy-is-integrated" property to figure
out which ports to enable as fibre ports.
Acked-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Bjørn Mork [Sat, 13 Mar 2021 16:45:50 +0000 (17:45 +0100)]
realtek: need to handle PHY_INTERFACE_MODE_NA for sfps
From the validate docs in include/linux/phylink.h:
When state->interface is PHY_INTERFACE_MODE_NA, phylink expects the
MAC driver to return all supported link modes.
Tested-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Bjørn Mork [Sat, 13 Mar 2021 16:45:49 +0000 (17:45 +0100)]
realtek: fix link-state interrupt
This bug was the root cause for the failing sfp driver.
Acked-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Álvaro Fernández Rojas [Wed, 17 Mar 2021 07:41:44 +0000 (08:41 +0100)]
mtd: fix imagetag compilation
Commit
b5b0796a1322 added an uint32_t to mtd.h without including stdint, which
results in a compilation error for those files not including stdint.h.
In file included from imagetag.c:36:
mtd.h:15:8: error: unknown type name 'uint32_t'
extern uint32_t opt_trxmagic;
^~~~~~~~
imagetag.c: In function 'trx_fixup':
imagetag.c:180:10: warning: unused variable 'res' [-Wunused-variable]
ssize_t res;
^~~
imagetag.c:177:14: warning: unused variable 'scan' [-Wunused-variable]
void *ptr, *scan;
^~~~
imagetag.c: In function 'trx_check':
imagetag.c:246:27: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
struct bcm_tag *tag = (const struct bcm_tag *) buf;
^
make[3]: *** [<builtin>: imagetag.o] Error 1
Fixes: b5b0796a1322 ("mtd: add option for TRX magic to fixtrx")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Rafał Miłecki [Wed, 17 Mar 2021 06:40:49 +0000 (07:40 +0100)]
bcm4908: backport recent bcm_sf2 changes
One 5.12 link fix and 5.13 crossbar support.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 16 Mar 2021 22:35:45 +0000 (23:35 +0100)]
bcm4908: backport recent bcm4908_enet changes
This includes 5.12 fix and 5.13 improvements.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Paul Spooren [Tue, 16 Mar 2021 01:59:26 +0000 (15:59 -1000)]
build,ib: add STRIP_ABI option for manifest
The ImageBuilder `make manifest` prints all installed packages. This
function can be used to create a list of package and corresponding
package versions before attempting image creation.
When called with `--strip-abi` OPKG can automatically strip attached
ABIVersions from package names. Make this function accessible for the
ImageBuilder by adding a `STRIP_ABI` variable.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Magnus Kroken [Sun, 14 Mar 2021 18:42:33 +0000 (19:42 +0100)]
mbedtls: update to 2.16.10
This release of Mbed TLS provides bug fixes and minor enhancements. This
release includes fixes for security issues.
Security fixes:
* Fix a buffer overflow in mbedtls_mpi_sub_abs()
* Fix an errorneous estimation for an internal buffer in
mbedtls_pk_write_key_pem()
* Fix a stack buffer overflow with mbedtls_net_poll() and
mbedtls_net_recv_timeout()
* Guard against strong local side channel attack against base64 tables
by making access aceess to them use constant flow code
Full release announcement:
https://github.com/ARMmbed/mbedtls/releases/tag/v2.16.10
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Álvaro Fernández Rojas [Tue, 16 Mar 2021 19:06:00 +0000 (20:06 +0100)]
bmips: backport bcm6368-mdio-mux support
This patch has been accepted for linux v5.13.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Tue, 16 Mar 2021 19:00:00 +0000 (20:00 +0100)]
bmips: enable CONFIG_B53_MDIO_DRIVER
Some devices have external switches connected by MDIO.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Tue, 16 Mar 2021 18:57:37 +0000 (19:57 +0100)]
bmips: backport b53 spi device tree patch
This patch has been accepted for linux v5.13.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Sun, 14 Mar 2021 19:05:29 +0000 (20:05 +0100)]
bmips: dgnd3700-v2: fix ethernet
This is a temporary workaround to get the ethernet working, since external
switch is connected by MDIO and it needs additional work.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Ilya Lipnitskiy [Tue, 16 Mar 2021 05:29:55 +0000 (22:29 -0700)]
kernel: backports: mt7530: fix TRGMII mode after reset
Backport upstream patch that fixes TRGMII mode now that mt7530 is
actually resetting the switch on ramips devices.
Patches apply to both Linux 5.4 and 5.10, since TRGMII is broken on both.
Fixes: 69551a244292 ("ramips: manage low reset lines")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Tony Ambardar [Mon, 15 Mar 2021 09:48:46 +0000 (02:48 -0700)]
x86/legacy: fix subtarget CPU for kernel 5.10
The 5.10 target config defined a baseline i686 CPU aligned to the 32-bit
generic subtarget. However, the legacy subtarget arch wasn't set to the
older 586MMX, defaulting instead to the i686.
Explicitly set the subtarget arch and refresh the subtarget config, as done
already with the old geode subtarget.
Fixes: 8391781389 ("x86: support kernel 5.10")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Rafał Miłecki [Mon, 15 Mar 2021 19:30:21 +0000 (20:30 +0100)]
bcm4908: backport first PHY 5.13 patches
1. Upstream accepted version of Kconfig change
2. Documentation binding fix
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Daniel Golle [Mon, 15 Mar 2021 16:39:20 +0000 (16:39 +0000)]
mediatek: mt7622: drop duplicate DEVICE_PACKAGES
kmod-mt7615e kmod-mt7615-firmware and uboot-envtools are already part
of the target's default package set. No need to add them again for
buffalo_wsr-2533dhp2.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
INAGAKI Hiroshi [Sun, 7 Mar 2021 17:36:16 +0000 (18:36 +0100)]
mediatek: add support for Buffalo WSR-2533DHP2
This adds support for the Buffalo WSR-2533DHP2.
The device uses the Broadcom TRX image format with a special magic. To
be able to boot the images or load them they have to be wrapped with
different headers depending how it is loaded.
There are multiple ways to install OpenWrt on this device.
Boot ramdisk from U-Boot
----------------------------
This will load the image and not write it into the flash.
1. Stop boot menu with "space" key
2. Select "System Load Linux to SDRAM via TFTP."
3. Load this image:
openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-initramfs-kernel.bin
4. The system boots the image
Write to flash from U-Boot
-----------------------------
This will load the image over tftp and directly write it into the flash.
1. Stop boot menu with "space" key
2. Select "System Load Linux Kernel then write to Flash via TFTP."
3. Load this image:
openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory-uboot.bin
4. The system writes this image into the flash and boots into it.
Write to flash from Web UI
-----------------------------
This will load the image over over the Web UI and write it into the flash
1. Open the Web UI
2. Go to "管理" -> "ファームウェア更新"
3. Select "ローカルファイル指定" and click "更新実行"
4. Load this image:
openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory.bin
5. The system writes this image into the flash and boots into it.
Specifications
-------------------
* SoC: MT7622 (4x4 2.4 GHz Wifi)
* Wifi: MT7615 (4x4 5 GHz Wifi)
* Flash: Winbond W29N01HZ 128MB SLC NAND
* RAM 256MB
* Ethernet: Realtek RTL8367S (5 x 1GBit/s, SoC via 2.5GBit/s)
Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 7 Mar 2021 17:28:15 +0000 (18:28 +0100)]
mediatek: support non standard trx magic values
Buffalo uses the TRX format with a different magic, add support for
this.
It is planned to send these patches upstream.
Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
INAGAKI Hiroshi [Sun, 7 Mar 2021 15:47:17 +0000 (16:47 +0100)]
mtd: add option for TRX magic to fixtrx
Buffalo uses the TRX header with a different magic and even changes this
magic with different devices. This change allows to specify the header
to use as a command line argument.
This is needed for the Buffalo WSR-2533DHP2 based on mt7622.
Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 30 Dec 2020 17:24:51 +0000 (18:24 +0100)]
tools: otrx: allow own magic
This allows to specify an own magic instead of using the default magic
value TRX_MAGIC. If no own magic is specified the default one will be
used.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 8 Mar 2021 23:55:19 +0000 (00:55 +0100)]
mediatek: fix mtk parallel nand driver
This fixes some bugs in the mtk parallel nand driver introduced in 5.10.
This patch was send upstream.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Sun, 14 Mar 2021 22:53:35 +0000 (23:53 +0100)]
kernel: replace threaded NAPI implementation in 5.10 with upstream backport
This uses a kthread per NAPI instance instead of the workqueue approach
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 14 Mar 2021 23:10:03 +0000 (00:10 +0100)]
mt76: update to the latest version
6a3cf95733e2 mt76: fix tx skb error handling in mt76_dma_tx_queue_skb
ab9045153343 mt76: mt7915: only modify tx buffer list after allocating tx token id
7e1eff676257 mt76: mt7915: fix unused 'mode' variable
8a2e22fcbf69 mt76: mt7921: fix suspend/resume sequence
27a54e8b687f mt76: mt7921: fix memory leak in mt7921_coredump_work
c267322f0bdb mt76: mt7921: switch to new api for hardware beacon filter [v2 update]
fd2c59d9ba46 mt76: mt7921: fixup rx bitrate statistics [v2 update]
bfa8d5a6a9a1 mt76: adjust to upstream API for enabling threaded NAPI
1706fb6c48e8 mt76: mt7663s: fix rx buffer refcounting
c5aca6692c41 mt76: mt7615: enable hw rx-amsdu de-aggregation
9002b0b30aed mt76: mt7615: add rx checksum offload support
8e3f5bfe74f6 mt76: mt7615: add support for rx decapsulation offload
8e3bba8bd3ef mt76: mt7615: fix memory leak in mt7615_coredump_work
760adce29100 mt76: mt7921: fix aggr length histogram
84229a51845a mt76: mt7915: fix aggr len debugfs node
10a95da23cb7 mt76: mt7921: remove unneeded semicolon
2856dc8fb57e mt76: mt7921: fix stats register definitions
1b245e57549d mt76: mt7615: fix TSF configuration
1a2e2965b62b mt76: mt7615: remove hdr->fw_ver check
f60ec1b9473d mt76: mt7615: fix mib stats counter reporting to mac80211
8a5b036af48f mt76: mt7915: fix mib stats counter reporting to mac80211
ee6dbcc64f6d mt76: connac: fix kernel warning adding monitor interface
e46dd240ce72 mt76: check return value of mt76_txq_send_burst in mt76_txq_schedule_list
ddf95ead3bb3 mt76: mt7921: get rid of mt7921_sta_rc_update routine
fd2a51ea9dc8 mt76: mt7921: fix the base of PCIe interrupt
28f53d074bb0 mt76: mt7921: fix the base of the dynamic remap
8d737632b57f mt76: mt7921: check mcu returned values in mt7921_start
5ff25c915e62 mt76: mt7915: add missing capabilities for DBDC
58dd3f26c099 mt76: mt7615: fix CSA notification for DBDC
76f4959107ac mt76: mt7615: stop ext_phy queue when mac reset happens
7de0a0654054 mt76: mt7915: fix CSA notification for DBDC
e9e418fc7eb0 mt76: mt7915: stop ext_phy queue when mac reset happens
477b78301879 mt76: mt7915: fix PHY mode for DBDC
37b4dc0f7595 mt76: mt76x0u: Add support for TP-Link T2UHP(UN) v1
29a04583aecb mt76: mt7915: fix rxrate reporting
a4307e6ba054 mt76: mt7915: fix txrate reporting
256f324f8fcd mt76: mt7915: check mcu returned values in mt7915_ops
638b112188a5 mt76: mt7615: check mcu returned values in mt7615_ops
975cccfa96da mt76: mt7663: fix when beacon filter is being applied
aafe972e95b2 mt76: mt7663s: make all of packets 4-bytes aligned in sdio tx aggregation
0d5b1a702715 mt76: mt7663s: fix the possible device hang in high traffic
00628061b546 mt76: mt7615: add missing capabilities for DBDC
2303e1844afd mt76: mt7915: fix possible deadlock while mt7915_register_ext_phy()
6e2b9d258306 mt76: mt7921: reduce mcu timeouts for suspend, offload and hif_ctrl msg
3cf5afc02955 mt76: introduce mcu_reset function pointer in mt76_mcu_ops structure
9af9622df549 mt76: mt7921: introduce mt7921_run_firmware utility routine.
e12c44a7e165 mt76: mt7921: introduce __mt7921_start utility routine
7b56d5bf6ea0 mt76: dma: introduce mt76_dma_queue_reset routine
a80e50098b51 mt76: dma: export mt76_dma_rx_cleanup routine
e0708e296e27 mt76: mt7921: add wifi reset support
87e09e8482cf mt76: mt7921: remove leftovers from dbdc configuration
cc933b3669f7 mt76: mt7921: remove redundant check on type
ca22cc221ae7 linux-firmware: add firmware for MT7921
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 14 Mar 2021 23:05:42 +0000 (00:05 +0100)]
mac80211: backport upstream patches for driver disconnect
Needed for an mt76 update
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Andre Heider [Tue, 16 Feb 2021 07:21:08 +0000 (08:21 +0100)]
build: prereq: drop support for Python 3.5
The final Python 3.5 release was 3.5.10 in September 2020 [0].
This release series is now End-of-Life (EOL).
The only LTS distribution that still only ships Python 3.5 is Ubuntu 16.04,
which will be EOL in April 2021 [1].
The meson build system bumped their python requirement to 3.6 for the 0.57.0
release. This patch ensures that OpenWrt can update meson while still
relying on the host python.
[0] https://www.python.org/dev/peps/pep-0478/#id4
[1] https://ubuntu.com/about/release-cycle
[2] https://mesonbuild.com/Release-notes-for-0-57-0.html#minimum-required-python-version-updated-to-36
Signed-off-by: Andre Heider <a.heider@gmail.com>
[python3.6+ in README.md]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Paul Spooren [Thu, 4 Feb 2021 23:49:02 +0000 (13:49 -1000)]
scripts,ipkg-build: use realpath for pkg_dir
This allows manual execution of the ipkg-build script even with
releative path.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Paul Spooren [Thu, 4 Feb 2021 23:34:30 +0000 (13:34 -1000)]
scripts,ipkg-build: apply shellcheck
This commit cleans the `ipkg-build` script via changes suggested by
shellcheck. These are mostly word splitting issues.
Remove the definition of GZIP, this adds three "lookups" of the `gzip`
binary but the rest of the build system doesn't seem to use such
improvements neither.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Rosen Penev [Sat, 6 Mar 2021 22:16:55 +0000 (14:16 -0800)]
gettext-full: disable nameless locale define
It seems some packages like transmission and json-glib fail with it
enabled.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Daniel Golle [Mon, 15 Mar 2021 00:48:02 +0000 (00:48 +0000)]
opkg: update to git HEAD
5936c4f libopkg: pkg_hash: prefer original packages to satisfy dependencies
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 14 Mar 2021 22:55:17 +0000 (22:55 +0000)]
opkg: update to git HEAD
d3a63b3 libopkg: add option to strip ABI versions from listed names
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 14 Mar 2021 22:08:16 +0000 (22:08 +0000)]
uboot-mediatek: also install production image to eMMC
Make installation to eMMC more convenient on the BPi-R64 by also
copying the production image (if valid) from SD Card to eMMC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 14 Mar 2021 19:11:14 +0000 (19:11 +0000)]
mediatek: mt7622: clean up image build
* clean up whitespace to make GPT partitioning more readable
* don't select packages already part of the target default selection
* don't select U-Boot variants (breaks ImageBuilder)
* don't select AHCI on boards without SATA
* don't select kmod-usb2 and kmod-ohci, USB 1.x and USB 2.0 devices
work fine with the in-SoC XHCI host having just kmod-usb3 installed.
* select kmod-btmtkuart for devices with Bluetooth support
* sort DEVICE_PACKAGES
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 14 Mar 2021 19:07:00 +0000 (19:07 +0000)]
uboot-mediatek: select matching U-Boot for board
Instead of building all U-Boot variants by default, build only those
needed by the selected board(s).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 14 Mar 2021 19:04:20 +0000 (19:04 +0000)]
firmware-utils/ptgen: remove unused variable assignment
Discovered by coverty:
CID
1473630: Code maintainability issues (UNUSED_VALUE)
Assigning value from "type_to_guid_and_name(type, &name)" to
"part_guid" here, but that stored value is overwritten before it can
be used.
Remove the now redundant assignment of part_guid which is also set
conditionally later on.
Fixes: 4a078bd135 ("firmware-utils/ptgen: fix partition guid and name")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rafał Miłecki [Sun, 14 Mar 2021 18:22:18 +0000 (19:22 +0100)]
bcm4908: use accepted 5.13 DTS patches
Some patches were slightly cleaned up. One things worth mentioning is
that adding:
phy-mode = "rgmii"
broke SF2 driver. It made it access random register breaking switch
setup.
That's why this commit also adds a quick sf2 fix.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Sun, 14 Mar 2021 18:10:18 +0000 (19:10 +0100)]
bcm53xx: backport first 5.13 DTS changes
This adds NVMEM bindings that are needed for proper booting on Linksys
devices.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Tony Ambardar [Tue, 9 Mar 2021 03:16:11 +0000 (19:16 -0800)]
x86: support kernel 5.10
Add linux 5.10 as testing kernel, copy generic/subtarget configs and target
patches from 5.4.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
x86: update target patches for kernel 5.10
Refresh all patches while also dropping:
800-hwmon-w83627ehf-dont-claim-nct677x.patch
which is now upstreamed as:
3207408ab4cb ("hwmon: (w83627ehf) remove nct6775 and nct6776 support")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
x86: refresh 5.10 target config
Refresh config using "make kernel_oldconfig".
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
x86: refresh and test all subtarget configs
Refresh configs using "make kernel_oldconfig CONFIG_TARGET=subtarget".
Build and run-tested using QEMU: x86/64, x86/legacy, x86/generic.
Build-tested only: x86/geode.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
[squashed commits]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tony Ambardar [Mon, 8 Mar 2021 04:22:03 +0000 (20:22 -0800)]
kernel: support new mdio_devres.ko module in 5.10
Add kmod-mdio-devres package and kernel config symbol, and update related
kmod-r8169 and kmod-ixgbe package dependencies.
Build tested module dependencies on x86/64 with CONFIG_ALL_KMODS=y.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Tony Ambardar [Wed, 17 Feb 2021 08:12:44 +0000 (00:12 -0800)]
kernel: add missing config symbols for 5.10
Update generic config to add missing options that prompt during builds.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Álvaro Fernández Rojas [Sun, 14 Mar 2021 13:22:53 +0000 (14:22 +0100)]
bmips: minor ethernet driver cleanups and fixes
Add some minor ethernet driver cleanups and fixes to improve code quality.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Sun, 14 Mar 2021 13:21:48 +0000 (14:21 +0100)]
bmips: reorganize patches
Rename and reorganize backported patches.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Hauke Mehrtens [Wed, 27 Jan 2021 21:16:11 +0000 (22:16 +0100)]
realtek: Add ZyXEL GS1900-8
The ZyXEL GS1900-8 is a 8 port switch without any PoE functionality or
SFP ports, but otherwise similar to the other GS1900 switches.
Specifications
--------------
* Device: ZyXEL GS1900-8 v1.2
* SoC: Realtek RTL8380M 500 MHz MIPS 4KEc
* Flash: Macronix MX25L12835F 16 MiB
* RAM: Nanya NT5TU128M8GE-AC 128 MiB DDR2 SDRAM
* Ethernet: 8x 10/100/1000 Mbit
* LEDs: 1 PWR LED (green, not configurable)
1 SYS LED (green, configurable)
8 ethernet port status LEDs (green, SoC controlled)
* Buttons: 1 on-off glide switch at the back (not configurable)
1 reset button at the right side, behind the air-vent
(not configurable)
1 reset button on front panel (configurable)
* Power 12V 1A barrel connector
* UART: 1 serial header (JP2) with populated standard pin connector on
the left side of the PCB, towards the back. Pins are labelled:
+ VCC (3.3V)
+ TX (really RX)
+ RX (really TX)
+ GND
the labelling is done from the usb2serial connector's point of
view, so RX/ TX are mixed up.
Serial connection parameters for both devices: 115200 8N1.
Installation
------------
Instructions are identical to those for the GS1900-10HP and GS1900-8HP.
* Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10).
* Set up a TFTP server on your client and make it serve the initramfs
image.
* Connect serial, power up the switch, interrupt U-boot by hitting the
space bar, and enable the network:
> rtk network on
* Since the GS1900-10HP is a dual-partition device, you want to keep the
OEM firmware on the backup partition for the time being. OpenWrt can
only boot off the first partition anyway (hardcoded in the DTS). To
make sure we are manipulating the first partition, issue the following
commands:
> setsys bootpartition 0
> savesys
* Download the image onto the device and boot from it:
> tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8-initramfs-kernel.bin
> bootm
* Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it:
> sysupgrade /tmp/openwrt-realtek-generic-zyxel_gs1900-8-squashfs-sysupgrade.bin
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 24 Feb 2021 21:03:39 +0000 (22:03 +0100)]
realtek: Add generic zyxel_gs1900 image definition
Add a new common device definition for the Zyxel GS1900 line of
switches.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Dominick Grift [Sun, 14 Mar 2021 11:42:29 +0000 (12:42 +0100)]
selinux-policy: update to version v0.8
3d7da7a igmpproxy tidy some loose ends
c84ba0f rcigmpproxy: add entries to /etc when creating /etc/igmpproxy.conf
5a18967 adds igmpproxy skeleton
7e6a218 logread: support resolving dns names
e39ca8b netifd: add support for /etc/udhcpc.user
7952bd0 odhcp6c: support /etc/odhcp6c.user
ba0eb4e swconfig, fwenv, agent
4556b8a pppd cosmetic
9324d9d pppd: sends AT commands to model using /dev/ttyUSBN
417b14a ttydev: add some more ttyUSB
ed739dc example: dont depend on policycoreutils
97613f9 dropbear: using dropbear as scp: dns name resolving
12c193b dropbear tcp connect ssh ports for scp
c050077 rcdnsmasq: remove redundant rule and make rcsysntpd optional
8c5de35 this is a bug
8d5c463 uhttpd rcboot rcdnsmasq
094266e hostapd and wpa_supplicant
aef0bd7 mountroot: maintains /tmp/sysupgrade.tar
24f0406 dropbear: allow it to read tmp.fs files
2901433 firstboot mkfsf2fs rcboot
2c4afb7 blockmount mmc
465ca98 adds industrial i/o (iio) nodedev
82f686e mtd stordev: back that ubiblock0_4p1 up with a filecon
7df78bd ubus: "support" older ubusd versions that run as root
4458bce swconfig: allow using terminal (to print output)
e8d606d sslcert: openssl linked: this shaves off 200 bytes
93afffb jshn ntpdhotplug
0b847f0 wpad: reads /etc/ssl/openssl.cnf
f14ee34 indent fix
a0c7cad mtd, uhttpd, ubus and ntpdhotplug
d74f98f adds a not about checkreqprot requirement in some scenarios
affacce example: add policycoreutils-setfiles for make check
4f944dc kmodloader and fwenv:
efe36a3 netifd: adds a comment/reminder
581b087 more fw_printenv loose ends
30177a4 fw_setenv: needs mtd write access to set and delete env
da28f4c fw_printenv: some minor clean ups
a062053 fw_printenv missing rules
244ba5f blockmount: extroot and /rwm
0745a6a squid: allow squid to run sslcrtd with domain transition
b851df6 squid fix
8c55acd squid: adds certfile and allow connect http but...
b7c1f6d Makefile: exclude tinyproxy from mintesttgt (using squid)
5ff39bd squid: forgot about luci
5366c97 squid/rcsquid some basic fill in
8743da6 squid skeleton
687a43b adds squid 3128 port to httpproxy port
Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
Álvaro Fernández Rojas [Mon, 1 Mar 2021 07:21:59 +0000 (08:21 +0100)]
bmips: add experimental ethernet support
This adds experimental ethernet support for BCM6318, BCM6328, BCM6362, BCM6368
and BCM63268.
BCM6358 needs a different driver, so there's no support for now.
Working devices:
- Comtrend AR-5315u
- Comtrend AR-5387un
- Comtrend VR-3025u
- Comtrend VR-3032u
Not working devices:
- Netgear DGND3700 v2 (no idea on how the external switch is connected)
- Huawei HG556a ver B (BCM6358 needs a separate driveer)
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Tony Ambardar [Fri, 12 Mar 2021 01:45:05 +0000 (17:45 -0800)]
tools/libelf: remove unneeded host library
This old ELF library dating to 2009 used to be necessary on MacOS but
is not required for building the kernel or tools since [1]. On Linux
systems, libelf is already an OpenWRT build-system prerequisite [2].
Presence of the older library can mask or conflict with the system libelf
and lead to build errors, as seen compiling Linux kernels since v5.8 or
host tools such as dwarves (e.g. pahole).
Remove the unnecessary tools/libelf library and avoid the related issues.
[1]
5f8e587240 ("build: force disable stack validation during kernel build
on non-linux systems")
[2] https://openwrt.org/docs/guide-developer/build-system/install-buildsystem#prerequisites
Tested-by: Rosen Penev <rosenp@gmail.com> (Linux)
Tested-by: Georgi Valkov <gvalkov@abv.bg> (MacOS)
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Tony Ambardar [Tue, 26 Jan 2021 22:37:04 +0000 (14:37 -0800)]
elfutils: remove host build from target package
Commit
f4da28c301 ("elfutils: Add host build") supplied a libelf host
library to fix a glib2 host build error, but this need was later removed
by
b6212c8769 ("glib2: don't use libelf during host build").
More importantly, there are already two sources for libelf host libraries:
OpenWRT build prerequisites [1] and tools/libelf. A third is not needed.
Ref [1]: https://openwrt.org/docs/guide-developer/build-system/install-buildsystem#prerequisites
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Hannu Nyman [Tue, 9 Mar 2021 15:46:52 +0000 (17:46 +0200)]
busybox: backport fixes for 1.33.0
Backport two fixes for 1.33.0
* history file storing
* traceroute command option parsing
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Daniel Golle [Sat, 13 Mar 2021 19:07:09 +0000 (19:07 +0000)]
uboot-mediatek: import fix for AHCI and enable SATA
Import patch form Frank Wunderlich <frank-w@public-files.de> to fix
build of MediaTek AHCI SATA driver.
Enable that driver on Bananapi BPi-R64.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel González Cabanelas [Sat, 13 Mar 2021 11:57:46 +0000 (12:57 +0100)]
mvebu: LS421DE: make cosmetics changes in dts file
Make some cosmetic changes in the Buffalo LinkStation LS421DE NAS:
- Delete pointless #xxx-cells
- bootargs: replace earlyprintk with earlycon and remove unneeded args.
- Separate pinmux nodes with empty lines.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Alin Nastac [Mon, 1 Mar 2021 08:51:31 +0000 (09:51 +0100)]
xfrm: simplify the check for necessary kernel support
[ -d /sys/module/xfrm_interface ] is enough to check if
CONFIG_XFRM_INTERFACE support was enabled in kernel.
Signed-off-by: Alin Nastac <alin.nastac@technicolor.com>
Alin Nastac [Mon, 1 Mar 2021 08:49:43 +0000 (09:49 +0100)]
vti: use alternative way to check if kernel support is enabled
When necessary support is built in kernel, vti protocol support is
not enabled in netifd.
Signed-off-by: Alin Nastac <alin.nastac@technicolor.com>
Alin Nastac [Tue, 23 Feb 2021 12:05:09 +0000 (13:05 +0100)]
gre: use alternative way to check if kernel support is enabled
When necessary support is built in kernel, gre protocol support is
not enabled in netifd.
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Kabuli Chana [Wed, 10 Mar 2021 02:19:12 +0000 (19:19 -0700)]
kernel: bump 5.10 to 5.10.23
update kernel to 5.10.23, rebase patches, deleted upstreamed patch:
target/linux/generic/backport-5.10/830-v5.12-0001-net-usb-qmi_wwan-support-ZTE-P685M-modem.patch
compile / test - mvebu / mamba, rango
Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
[refresh again]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
John Audia [Sun, 7 Mar 2021 12:26:24 +0000 (07:26 -0500)]
kernel: bump 5.4 to 5.4.105
Ran update_kernel.sh in a fresh clone without any existing toolchains.
Removed upstreamed generic-backports:
830-v5.12-0001-net-usb-qmi_wwan-support-ZTE-P685M-modem.patch
831-v5.9-usbip-tools-fix-build-error-for-multiple-definition.patch
755-v5.8-net-dsa-add-GRO-support-via-gro_cells.patch
Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Curtis Deptuck <curtdept@me.com> [x86/64]
[squash patches]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Daniel Golle [Sat, 13 Mar 2021 14:59:33 +0000 (14:59 +0000)]
mediatek: image: don't use 'M' unit as dd may not support that
dd on Mac OS X apparently fails when using 'M' unit for bs.
dd: bs: illegal numeric value
Use 'k' unit instead for 'pad-to' to fix that.
Reported-by: Georgi Valkov <gvalkov@abv.bg>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 13 Mar 2021 13:38:25 +0000 (13:38 +0000)]
uboot-mediatek: fix build on Mac OS X
Copy patch added to uboot-sunxi by commit
3cc57ba462
("uboot-sunxi: add missing type __u64") also to uboot-mediatek.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rafał Miłecki [Fri, 12 Mar 2021 20:08:24 +0000 (21:08 +0100)]
bcm47xx: make WGT634U NVRAM patch apply again
Fixes: 1c48eee5b2bc ("kernel: backport Broadcom NVRAM driver cleanups")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Fri, 12 Mar 2021 13:45:19 +0000 (14:45 +0100)]
kernel: add compatibility with upstream threaded NAPI patch
Enable threading if dev->threaded is set. This will be used to bring mt76 back
in sync with upstream
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 8 Mar 2021 16:20:20 +0000 (17:20 +0100)]
kernel: update 5.10 flow offload patches
Includes PPPoE support and VLAN related fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Fri, 12 Mar 2021 17:30:01 +0000 (18:30 +0100)]
kernel: add pending mtd patches adding NVMEM support
It's meant to provide upstream support for mtd & NVMEM. It's required
e.g. for reading MAC address from mtd partition content. It seems to be
in a final shape so it's worth testing.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 12 Mar 2021 16:37:59 +0000 (17:37 +0100)]
kernel: move mtd ofpart accepted patch
Move upstream patch to the backport directory.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 12 Mar 2021 16:36:58 +0000 (17:36 +0100)]
kernel: add two more missed 5.10 backports
Those were added to 5.4 but missed while introducing 5.10 kernel.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 12 Mar 2021 17:10:09 +0000 (18:10 +0100)]
bcm53xx: initialize NVRAM from NVMEM driver
NVRAM access may be needed early in boot process. Reading it using mtd
happens quite late in the init process. Add NVRAM initialization to the
NVMEM driver which comes up early and depends on IO mapping only.
This is required by Linksys devices which use NVRAM content for proper
partitioning (detecting current firmware partition).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 12 Mar 2021 17:07:57 +0000 (18:07 +0100)]
kernel: backport Broadcom NVRAM driver cleanups
Refactoring of bcm47xx_nvram driver. It's used by bcm47xx and bcm53xx.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Álvaro Fernández Rojas [Fri, 12 Mar 2021 13:29:51 +0000 (14:29 +0100)]
bmips: switch to upstream bcm2835-rng reset patch
This patch has been accepted upstream.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>