ath79: DTS file style update and harmonization
[openwrt/openwrt.git] / target / linux / ath79 / dts / ar7161_aruba_ap-105.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6
7 #include "ar7100.dtsi"
8
9 / {
10 compatible = "aruba,ap-105", "qca,ar7161";
11 model = "Aruba AP-105";
12
13 chosen {
14 bootargs = "console=ttyS0,9600";
15 };
16
17 aliases {
18 led-boot = &led_power_green;
19 led-failsafe = &led_power_red;
20 led-running = &led_power_green;
21 led-upgrade = &led_power_green;
22 label-mac-device = &eth0;
23 };
24
25 extosc: ref {
26 compatible = "fixed-clock";
27 #clock-cells = <0>;
28 clock-output-names = "ref";
29 clock-frequency = <40000000>;
30 };
31
32 leds {
33 compatible = "gpio-leds";
34
35 led_power_green: power_green {
36 label = "ap-105:green:power";
37 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
38 };
39
40 led_power_red: power_red {
41 label = "ap-105:red:power";
42 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
43 panic-indicator;
44 };
45
46 wifi_2g_red {
47 label = "ap-105:red:wlan2g";
48 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
49 };
50
51 wifi_5g_red {
52 label = "ap-105:red:wlan5g";
53 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
54 };
55 };
56
57 ath9k-leds {
58 compatible = "gpio-leds";
59
60 wifi_2g_green {
61 label = "ap-105:green:wlan2g";
62 gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
63 linux,default-trigger = "phy0tpt";
64 };
65
66 wifi_5g_green {
67 label = "ap-105:green:wlan5g";
68 gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
69 linux,default-trigger = "phy1tpt";
70 };
71 };
72
73 keys {
74 compatible = "gpio-keys";
75
76 reset {
77 label = "reset";
78 linux,code = <KEY_RESTART>;
79 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
80 };
81 };
82
83 i2c {
84 compatible = "i2c-gpio";
85
86 sda-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
87 scl-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
88
89 /* can be removed on 4.19 */
90 gpios = <&gpio 5 GPIO_ACTIVE_LOW>,
91 <&gpio 4 GPIO_ACTIVE_LOW>;
92
93 #address-cells = <1>;
94 #size-cells = <0>;
95
96 tpm@29 {
97 compatible = "atmel,at97sc3203s";
98 reg = <0x29>;
99
100 /* triggering it, will also kill system */
101 reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
102 };
103 };
104 };
105
106 &pcie0 {
107 status = "okay";
108
109 ath9k0: wifi@0,11 { /* 2.4 GHz */
110 compatible = "pci168c,0029";
111 mtd-mac-address = <&hwinfo 0x1c>;
112 mtd-mac-address-increment = <1>;
113 reg = <0x8800 0 0 0 0>;
114 #gpio-cells = <2>;
115 gpio-controller;
116 };
117
118 ath9k1: wifi@0,12 { /* 5 GHz */
119 compatible = "pci168c,0029";
120 mtd-mac-address = <&hwinfo 0x1c>;
121 mtd-mac-address-increment = <2>;
122 reg = <0x9000 0 0 0 0>;
123 #gpio-cells = <2>;
124 gpio-controller;
125 };
126 };
127
128 &uart {
129 status = "okay";
130 };
131
132 &mdio0 {
133 status = "okay";
134
135 phy-mask = <0x1>;
136
137 phy0: ethernet-phy@0 {
138 reg = <0>;
139 };
140 };
141
142 &eth0 {
143 status = "okay";
144 mtd-mac-address = <&hwinfo 0x1c>;
145
146 pll-data = <0x00110000 0x00001099 0x00991099>;
147
148 phy-mode = "rgmii";
149 phy-handle = <&phy0>;
150 };
151
152 &spi {
153 status = "okay";
154
155 num-cs = <1>;
156
157 flash@0 {
158 compatible = "jedec,spi-nor";
159 reg = <0>;
160 spi-max-frequency = <25000000>;
161
162 partitions {
163 compatible = "fixed-partitions";
164 #address-cells = <1>;
165 #size-cells = <1>;
166
167 partition@0 {
168 label = "u-boot";
169 reg = <0x000000 0x40000>;
170 read-only;
171 };
172
173 partition@40000 {
174 label = "firmware";
175 reg = <0x40000 0xfa0000>;
176 compatible = "denx,uimage";
177 };
178
179 hwinfo: partition@fe0000 {
180 label = "hwinfo";
181 reg = <0xfe0000 0x10000>;
182 read-only;
183 };
184
185 partition@ff0000 {
186 label = "u-boot-env";
187 reg = <0xff0000 0x10000>;
188 read-only;
189 };
190 };
191 };
192 };