target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "TP-Link CPE610 v1";
  11         compatible = "tplink,cpe610-v1", "qca,ar9344";
  12
  13         aliases {
  14                 led-boot = &system;
  15                 led-failsafe = &system;
  16                 led-upgrade = &system;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 system: lan {
  23                         label = "tp-link:green:lan";
  24                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 wlan5g {
  28                         label = "tp-link:green:wlan5g";
  29                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  30                         linux,default-trigger = "phy0tpt";
  31                 };
  32         };
  33
  34         keys {
  35                 compatible = "gpio-keys";
  36
  37                 reset {
  38                         linux,code = <KEY_RESTART>;
  39                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  40                         debounce-interval = <60>;
  41                 };
  42         };
  43
  44 };
  45
  46 &ref {
  47         clock-frequency = <40000000>;
  48 };
  49
  50 &uart {
  51         status = "okay";
  52 };
  53
  54 &spi {
  55         num-cs = <1>;
  56
  57         status = "okay";
  58
  59         flash@0 {
  60                 compatible = "jedec,spi-nor";
  61                 reg = <0>;
  62                 spi-max-frequency = <25000000>;
  63
  64                 partitions {
  65                         compatible = "fixed-partitions";
  66                         #address-cells = <1>;
  67                         #size-cells = <1>;
  68
  69                         uboot: partition@0 {
  70                                 label = "u-boot";
  71                                 reg = <0x000000 0x020000>;
  72                                 read-only;
  73                         };
  74
  75                         partition@20000 {
  76                                 label = "partition-table";
  77                                 reg = <0x020000 0x010000>;
  78                                 read-only;
  79                         };
  80
  81                         info: partition@30000 {
  82                                 label = "info";
  83                                 reg = <0x030000 0x010000>;
  84                                 read-only;
  85                         };
  86
  87                         partition@40000 {
  88                                 label = "firmware";
  89                                 reg = <0x040000 0x780000>;
  90
  91                                 compatible = "fixed-partitions";
  92                                 #address-cells = <1>;
  93                                 #size-cells = <1>;
  94
  95                                 partition@0 {
  96                                         label = "kernel";
  97                                         reg = <0x000000 0x1c0000>;
  98                                 };
  99
 100                                 partition@1c0000 {
 101                                         label = "rootfs";
 102                                         reg = <0x1c0000 0x5c0000>;
 103                                 };
 104                         };
 105
 106                         partition@7c0000 {
 107                                 label = "config";
 108                                 reg = <0x7c0000 0x030000>;
 109                                 read-only;
 110                         };
 111
 112                         art: partition@7f0000 {
 113                                 label = "art";
 114                                 reg = <0x7f0000 0x010000>;
 115                                 read-only;
 116                         };
 117                 };
 118         };
 119 };
 120
 121 &wmac {
 122         status = "okay";
 123
 124         mtd-cal-data = <&art 0x1000>;
 125         mtd-mac-address = <&info 0x08>;
 126 };
 127
 128 &eth0 {
 129         status = "okay";
 130
 131         mtd-mac-address = <&info 0x08>;
 132
 133         phy-mode = "mii";
 134         phy-handle = <&swphy4>;
 135 };
 136
 137 &eth1 {
 138         status = "okay";
 139         compatible = "syscon", "simple-mfd";
 140 };