target/linux/ath79/dts/qca9531_glinet_gl-e750.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca953x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "glinet,gl-e750", "qca,qca9531";
  10         model = "GL.iNet GL-E750";
  11
  12         aliases {
  13                 label-mac-device = &eth0;
  14         };
  15
  16         keys {
  17                 compatible = "gpio-keys";
  18
  19                 pinctrl-names = "default";
  20                 pinctrl-0 = <&jtag_disable_pins>;
  21
  22                 reset {
  23                         label = "reset";
  24                         linux,code = <KEY_RESTART>;
  25                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 switch {
  29                         label = "switch";
  30                         linux,code = <BTN_0>;
  31                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  32                 };
  33         };
  34
  35         gpio-export {
  36                 compatible = "gpio-export";
  37
  38                 gpio_lte_power {
  39                         gpio-export,name = "lte_power";
  40                         gpio-export,output = <1>;
  41                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  42                 };
  43          };
  44 };
  45
  46 &pcie0 {
  47         status = "okay";
  48 };
  49
  50 &usb0 {
  51         status = "okay";
  52 };
  53
  54 &usb_phy {
  55         status = "okay";
  56 };
  57
  58 &spi {
  59         status = "okay";
  60
  61         flash@0 {
  62                 compatible = "jedec,spi-nor";
  63                 reg = <0>;
  64                 spi-max-frequency = <25000000>;
  65
  66                 partitions {
  67                         compatible = "fixed-partitions";
  68                         #address-cells = <1>;
  69                         #size-cells = <1>;
  70
  71                         partition@0 {
  72                                 label = "u-boot";
  73                                 reg = <0x0 0x40000>;
  74                                 read-only;
  75                         };
  76
  77                         partition@40000 {
  78                                 label = "u-boot-env";
  79                                 reg = <0x40000 0x10000>;
  80                         };
  81
  82                         art: partition@50000 {
  83                                 label = "art";
  84                                 reg = <0x50000 0x10000>;
  85                                 read-only;
  86                         };
  87
  88                         partition@60000 {
  89                                 label = "kernel";
  90                                 reg = <0x60000 0x400000>;
  91                         };
  92
  93                         partition@460000 {
  94                                 label = "reserved";
  95                                 reg = <0x460000 0xba0000>;
  96                         };
  97                 };
  98         };
  99
 100         flash@1 {
 101                 compatible = "spi-nand";
 102                 reg = <1>;
 103                 spi-max-frequency = <25000000>;
 104
 105                 partitions {
 106                         compatible = "fixed-partitions";
 107                         #address-cells = <1>;
 108                         #size-cells = <1>;
 109
 110                         partition@0 {
 111                                 label = "ubi";
 112                                 reg = <0x0 0x8000000>;
 113                         };
 114                 };
 115         };
 116 };
 117
 118 &eth0 {
 119         status = "okay";
 120
 121         phy-handle = <&swphy4>;
 122
 123         mtd-mac-address = <&art 0x0>;
 124 };
 125
 126 &eth1 {
 127         compatible = "syscon", "simple-mfd";
 128 };
 129
 130 &wmac {
 131         status = "okay";
 132
 133         mtd-cal-data = <&art 0x1000>;
 134 };