target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca953x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_link4;
  11                 led-failsafe = &led_link4;
  12                 led-running = &led_link4;
  13                 led-upgrade = &led_link4;
  14                 label-mac-device = &wmac;
  15         };
  16
  17         leds: leds {
  18                 compatible = "gpio-leds";
  19
  20                 link1 {
  21                         label = "green:link1";
  22                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 link2 {
  26                         label = "green:link2";
  27                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 link3 {
  31                         label = "green:link3";
  32                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 led_link4: link4 {
  36                         label = "green:link4";
  37                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  38                 };
  39         };
  40
  41         keys {
  42                 compatible = "gpio-keys";
  43
  44                 reset {
  45                         label = "Reset button";
  46                         linux,code = <KEY_RESTART>;
  47                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  48                 };
  49         };
  50 };
  51
  52 &spi {
  53         status = "okay";
  54
  55         flash@0 {
  56                 #address-cells = <1>;
  57                 #size-cells = <1>;
  58                 compatible = "jedec,spi-nor";
  59                 reg = <0>;
  60                 spi-max-frequency = <25000000>;
  61
  62                 partitions {
  63                         compatible = "fixed-partitions";
  64                         #address-cells = <1>;
  65                         #size-cells = <1>;
  66
  67                         uboot: partition@0 {
  68                                 label = "u-boot";
  69                                 reg = <0x000000 0x020000>;
  70                                 read-only;
  71                         };
  72
  73                         partition@20000 {
  74                                 label = "partition-table";
  75                                 reg = <0x020000 0x010000>;
  76                                 read-only;
  77                         };
  78
  79                         info: partition@30000 {
  80                                 label = "info";
  81                                 reg = <0x030000 0x010000>;
  82                                 read-only;
  83                         };
  84
  85                         partition@40000 {
  86                                 label = "firmware";
  87                                 reg = <0x040000 0x780000>;
  88                                 compatible = "tplink,firmware";
  89                         };
  90
  91                         config: partition@7c0000 {
  92                                 label = "config";
  93                                 reg = <0x7c0000 0x030000>;
  94                                 read-only;
  95                         };
  96
  97                         art: partition@7f0000 {
  98                                 label = "art";
  99                                 reg = <0x7f0000 0x010000>;
 100                                 read-only;
 101                         };
 102                 };
 103         };
 104 };
 105
 106 &eth0 {
 107         status = "okay";
 108
 109         phy-handle = <&swphy4>;
 110
 111         mtd-mac-address = <&info 0x8>;
 112 };
 113
 114 &wmac {
 115         status = "okay";
 116
 117         mtd-cal-data = <&art 0x1000>;
 118         mtd-mac-address = <&info 0x8>;
 119 };