target/linux/ath79/dts/qca9533_tplink_tl-wa850re-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca953x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,tl-wa850re-v2", "qca,qca9533";
  10         model = "TP-Link TL-WA850RE v2";
  11
  12         aliases {
  13                 led-boot = &led_re;
  14                 led-failsafe = &led_re;
  15                 led-running = &led_re;
  16                 led-upgrade = &led_re;
  17                 label-mac-device = &wmac;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 pinctrl-names = "default";
  24                 pinctrl-0 = <&jtag_disable_pins>;
  25
  26                 lan {
  27                         label = "blue:lan";
  28                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 led_re: re {
  32                         label = "blue:re";
  33                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 signal1 {
  37                         label = "blue:signal1";
  38                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 signal2 {
  42                         label = "blue:signal2";
  43                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 signal3 {
  47                         label = "blue:signal3";
  48                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 signal4 {
  52                         label = "blue:signal4";
  53                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 led_signal5: signal5 {
  57                         label = "blue:signal5";
  58                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 wlan {
  62                         label = "blue:wlan";
  63                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  64                         linux,default-trigger = "phy0tpt";
  65                 };
  66         };
  67
  68         keys {
  69                 compatible = "gpio-keys";
  70
  71                 reset {
  72                         label = "Reset button";
  73                         linux,code = <KEY_RESTART>;
  74                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  75                 };
  76
  77                 wps {
  78                         label = "WPS button";
  79                         linux,code = <KEY_RFKILL>;
  80                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  81                 };
  82         };
  83 };
  84
  85 &gpio {
  86         led_enable {
  87                 gpio-hog;
  88                 gpios = <15 GPIO_ACTIVE_HIGH>;
  89                 line-name = "tp-link:power:led";
  90                 output-high;
  91         };
  92 };
  93
  94 &spi {
  95         status = "okay";
  96
  97         flash@0 {
  98                 #address-cells = <1>;
  99                 #size-cells = <1>;
 100                 compatible = "jedec,spi-nor";
 101                 reg = <0>;
 102                 spi-max-frequency = <25000000>;
 103
 104                 partitions {
 105                         compatible = "fixed-partitions";
 106                         #address-cells = <1>;
 107                         #size-cells = <1>;
 108
 109                         partition@0 {
 110                                 label = "u-boot";
 111                                 reg = <0x000000 0x020000>;
 112                                 read-only;
 113                         };
 114
 115                         partition@20000 {
 116                                 label = "firmware";
 117                                 reg = <0x020000 0x390000>;
 118                                 compatible = "tplink,firmware";
 119                         };
 120
 121                         partition@3b0000 {
 122                                 label = "partition-table";
 123                                 reg = <0x3b0000 0x010000>;
 124                                 read-only;
 125                         };
 126
 127                         info: partition@3c0000 {
 128                                 label = "info";
 129                                 reg = <0x3c0000 0x010000>;
 130                                 read-only;
 131                         };
 132
 133                         partition@3d0000 {
 134                                 label = "config";
 135                                 reg = <0x3d0000 0x020000>;
 136                                 read-only;
 137                         };
 138
 139                         art: partition@3f0000 {
 140                                 label = "art";
 141                                 reg = <0x3f0000 0x010000>;
 142                                 read-only;
 143                         };
 144                 };
 145         };
 146 };
 147
 148 &eth0 {
 149         status = "okay";
 150
 151         phy-handle = <&swphy4>;
 152
 153         mtd-mac-address = <&info 0x8>;
 154 };
 155
 156 &eth1 {
 157         compatible = "syscon", "simple-mfd";
 158 };
 159
 160 &wmac {
 161         status = "okay";
 162
 163         mtd-cal-data = <&art 0x1000>;
 164         mtd-mac-address = <&info 0x8>;
 165 };