target/linux/ath79/dts/qca9533_tplink_tl-wr841.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca953x.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         aliases {
  14                 label-mac-device = &wmac;
  15         };
  16
  17         leds: leds {
  18                 compatible = "gpio-leds";
  19
  20                 wifi {
  21                         label = "tp-link:green:wlan";
  22                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  23                         linux,default-trigger = "phy0tpt";
  24                 };
  25
  26                 led_qss: qss {
  27                         label = "tp-link:green:qss";
  28                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 wan {
  32                         label = "tp-link:green:wan";
  33                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 lan1 {
  37                         label = "tp-link:green:lan1";
  38                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 lan2 {
  42                         label = "tp-link:green:lan2";
  43                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 lan3 {
  47                         label = "tp-link:green:lan3";
  48                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 lan4 {
  52                         label = "tp-link:green:lan4";
  53                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  54                 };
  55         };
  56
  57         keys {
  58                 compatible = "gpio-keys";
  59
  60                 reset {
  61                         label = "Reset button";
  62                         linux,code = <KEY_RESTART>;
  63                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  64                         debounce-interval = <60>;
  65                 };
  66
  67                 rfkill {
  68                         label = "RFKILL button";
  69                         linux,code = <KEY_RFKILL>;
  70                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  71                         debounce-interval = <60>;
  72                 };
  73         };
  74 };
  75
  76 &uart {
  77         status = "okay";
  78 };
  79
  80 &spi {
  81         status = "okay";
  82
  83         num-cs = <1>;
  84
  85         flash@0 {
  86                 compatible = "jedec,spi-nor";
  87                 reg = <0>;
  88                 spi-max-frequency = <25000000>;
  89
  90                 partitions {
  91                         compatible = "fixed-partitions";
  92                         #address-cells = <1>;
  93                         #size-cells = <1>;
  94
  95                         uboot:  partition@0 {
  96                                 label = "u-boot";
  97                                 reg = <0x000000 0x020000>;
  98                                 read-only;
  99                         };
 100
 101                         partition@20000 {
 102                                 compatible = "tplink,firmware";
 103                                 label = "firmware";
 104                                 reg = <0x020000 0x3d0000>;
 105                         };
 106
 107                         art: partition@3f0000 {
 108                                 label = "art";
 109                                 reg = <0x3f0000 0x010000>;
 110                                 read-only;
 111                         };
 112                 };
 113         };
 114 };
 115
 116 &eth1 {
 117         mtd-mac-address = <&uboot 0x1fc00>;
 118 };
 119
 120 &eth0 {
 121         status = "okay";
 122
 123         phy-handle = <&swphy4>;
 124
 125         mtd-mac-address = <&uboot 0x1fc00>;
 126         mtd-mac-address-increment = <1>;
 127 };
 128
 129 &wmac {
 130         status = "okay";
 131
 132         mtd-cal-data = <&art 0x1000>;
 133         mtd-mac-address = <&uboot 0x1fc00>;
 134 };