target/linux/ath79/dts/qca9558_openmesh_mr.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         chosen {
  10                 /delete-property/ bootargs;
  11         };
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &led_power_blue;
  16                 led-failsafe = &led_power_blue;
  17                 led-running = &led_power_blue;
  18                 led-upgrade = &led_power_blue;
  19                 label-mac-device = &eth0;
  20         };
  21
  22         keys {
  23                 compatible = "gpio-keys";
  24
  25                 reset {
  26                         label = "reset";
  27                         linux,code = <KEY_RESTART>;
  28                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  29                 };
  30         };
  31
  32         leds {
  33                 compatible = "gpio-leds";
  34
  35                 lan_blue {
  36                         label = "blue:lan";
  37                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 led_wifi2g: wifi2g {
  41                         label = "blue:wifi2g";
  42                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 status_green {
  46                         label = "green:status";
  47                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 status_red {
  51                         label = "red:status";
  52                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 led_power_blue: power_blue {
  56                         label = "blue:power";
  57                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  58                         default-state = "on";
  59                 };
  60
  61                 led_wifi5g: wifi5g {
  62                         label = "blue:wifi5g";
  63                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  64                 };
  65         };
  66
  67         watchdog {
  68                 compatible = "linux,wdt-gpio";
  69                 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  70                 hw_algo = "toggle";
  71                 /* hw_margin_ms is actually 300s but driver limits it to 60s */
  72                 hw_margin_ms = <60000>;
  73                 always-running;
  74         };
  75 };
  76
  77 &spi {
  78         status = "okay";
  79
  80         flash@0 {
  81                 compatible = "jedec,spi-nor";
  82                 reg = <0>;
  83                 spi-max-frequency = <40000000>;
  84
  85                 /* partitions are passed via bootloader */
  86                 partitions {
  87                         compatible = "fixed-partitions";
  88                         #address-cells = <1>;
  89                         #size-cells = <1>;
  90
  91                         partition@0 {
  92                                 label = "u-boot";
  93                                 reg = <0x000000 0x040000>;
  94                                 read-only;
  95                         };
  96
  97                         partition@40000 {
  98                                 label = "u-boot-env";
  99                                 reg = <0x040000 0x010000>;
 100                         };
 101
 102                         partition@50000 {
 103                                 label = "custom";
 104                                 reg = <0x050000 0x060000>;
 105                                 read-only;
 106                         };
 107
 108                         partition@b0000 {
 109                                 label = "inactive";
 110                                 reg = <0x0b0000 0x7a0000>;
 111                         };
 112
 113                         partition@850000 {
 114                                 label = "inactive2";
 115                                 reg = <0x850000 0x7a0000>;
 116                         };
 117
 118                         art: partition@ff0000 {
 119                                 label = "ART";
 120                                 reg = <0xff0000 0x010000>;
 121                                 read-only;
 122
 123                                 nvmem-layout {
 124                                         compatible = "fixed-layout";
 125                                         #address-cells = <1>;
 126                                         #size-cells = <1>;
 127
 128                                         macaddr_art_0: macaddr@0 {
 129                                                 reg = <0x0 0x6>;
 130                                         };
 131                                 };
 132                         };
 133                 };
 134         };
 135 };
 136
 137 &mdio0 {
 138         status = "okay";
 139
 140         phy5: ethernet-phy@5 {
 141                 reg = <5>;
 142                 eee-broken-100tx;
 143                 eee-broken-1000t;
 144         };
 145 };
 146
 147 &eth0 {
 148         status = "okay";
 149
 150         pll-data = <0x82000000 0x80000101 0x80001313>;
 151
 152         nvmem-cells = <&macaddr_art_0>;
 153         nvmem-cell-names = "mac-address";
 154
 155         phy-mode = "rgmii-id";
 156         phy-handle = <&phy5>;
 157
 158         gmac-config {
 159                 device = <&gmac>;
 160                 rgmii-enabled = <1>;
 161         };
 162 };
 163
 164 &wmac {
 165         status = "okay";
 166
 167         mtd-cal-data = <&art 0x1000>;
 168         nvmem-cells = <&macaddr_art_0>;
 169         nvmem-cell-names = "mac-address";
 170         mac-address-increment = <1>;
 171 };
 172
 173 &pcie0 {
 174         status = "okay";
 175 };