target/linux/ath79/dts/qca9558_tplink_archer-c7.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &system;
  16                 led-failsafe = &system;
  17                 led-running = &system;
  18                 led-upgrade = &system;
  19         };
  20
  21         gpio_leds: leds {
  22                 compatible = "gpio-leds";
  23
  24                 system: system {
  25                         label = "tp-link:green:system";
  26                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  27                         default-state = "on";
  28                 };
  29
  30                 usb1 {
  31                         label = "tp-link:green:usb1";
  32                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  33                         default-state = "off";
  34                         trigger-sources = <&hub_port1>;
  35                         linux,default-trigger = "usbport";
  36                 };
  37
  38                 usb2 {
  39                         label = "tp-link:green:usb2";
  40                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  41                         default-state = "off";
  42                         trigger-sources = <&hub_port0>;
  43                         linux,default-trigger = "usbport";
  44                 };
  45
  46                 led_wlan2g: wlan2g {
  47                         label = "tp-link:green:wlan2g";
  48                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  49                         default-state = "off";
  50                         linux,default-trigger = "phy1tpt";
  51                 };
  52
  53                 qss {
  54                         label = "tp-link:green:qss";
  55                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  56                         default-state = "off";
  57                 };
  58         };
  59
  60         gpio_keys: keys {
  61                 compatible = "gpio-keys";
  62
  63                 reset {
  64                         label = "Reset button";
  65                         linux,code = <KEY_RESTART>;
  66                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  67                         debounce-interval = <60>;
  68                 };
  69         };
  70
  71         gpio-export {
  72                 compatible = "gpio-export";
  73
  74                 gpio_usb1_power {
  75                         gpio-export,name = "tp-link:power:usb1";
  76                         gpio-export,output = <1>;
  77                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  78                 };
  79
  80                 gpio_usb2_power {
  81                         gpio-export,name = "tp-link:power:usb2";
  82                         gpio-export,output = <1>;
  83                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  84                 };
  85
  86         };
  87 };
  88
  89 &pcie1 {
  90         status = "okay";
  91 };
  92
  93 &uart {
  94         status = "okay";
  95 };
  96
  97 &gpio {
  98         status = "okay";
  99 };
 100
 101 &usb_phy0 {
 102         status = "okay";
 103 };
 104
 105 &usb0 {
 106         #address-cells = <1>;
 107         #size-cells = <0>;
 108         status = "okay";
 109
 110         hub_port0: port@1 {
 111                 reg = <1>;
 112                 #trigger-source-cells = <0>;
 113         };
 114 };
 115
 116 &usb_phy1 {
 117         status = "okay";
 118 };
 119
 120 &usb1 {
 121         #address-cells = <1>;
 122         #size-cells = <0>;
 123         status = "okay";
 124
 125         hub_port1: port@1 {
 126                 reg = <1>;
 127                 #trigger-source-cells = <0>;
 128         };
 129 };
 130
 131 &spi {
 132         status = "okay";
 133         num-cs = <1>;
 134
 135         flash@0 {
 136                 compatible = "jedec,spi-nor";
 137                 reg = <0>;
 138                 spi-max-frequency = <25000000>;
 139
 140                 mtdparts: partitions {
 141                         compatible = "fixed-partitions";
 142                         #address-cells = <1>;
 143                         #size-cells = <1>;
 144                 };
 145         };
 146 };
 147
 148 &mdio0 {
 149         status = "okay";
 150
 151         phy0: ethernet-phy@0 {
 152                 reg = <0>;
 153
 154                 qca,ar8327-initvals = <
 155                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 156                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 157                         0x50 0xc737c737 /* LED_CTRL0 */
 158                         0x54 0x00000000 /* LED_CTRL1 */
 159                         0x58 0x00000000 /* LED_CTRL2 */
 160                         0x5c 0x0030c300 /* LED_CTRL3 */
 161                         0x7c 0x0000007e /* PORT0_STATUS */
 162                         0x94 0x0000007e /* PORT6 STATUS */
 163                         >;
 164         };
 165 };
 166
 167 &eth0 {
 168         status = "okay";
 169
 170         mtd-mac-address = <&uboot 0x1fc00>;
 171         mtd-mac-address-increment = <1>;
 172         phy-handle = <&phy0>;
 173         pll-data = <0x56000000 0x00000101 0x00001616>;
 174
 175         gmac-config {
 176                 device = <&gmac>;
 177                 rgmii-enabled = <1>;
 178         };
 179 };
 180
 181 &eth1 {
 182         status = "okay";
 183
 184         mtd-mac-address = <&uboot 0x1fc00>;
 185         pll-data = <0x03000101 0x00000101 0x00001616>;
 186
 187         fixed-link {
 188                 speed = <1000>;
 189                 full-duplex;
 190         };
 191 };
 192
 193 &wmac {
 194         status = "okay";
 195         mtd-cal-data = <&art 0x1000>;
 196         mtd-mac-address = <&uboot 0x1fc00>;
 197 };