target/linux/generic/pending-4.14/180-net-phy-at803x-add-support-for-AT8032.patch

   1 From: Felix Fietkau <nbd@nbd.name>
   2 Subject: net: phy: at803x: add support for AT8032
   3
   4 Like AT8030, this PHY needs the GPIO reset workaround
   5
   6 Signed-off-by: Felix Fietkau <nbd@nbd.name>
   7 ---
   8
   9 --- a/drivers/net/phy/at803x.c
  10 +++ b/drivers/net/phy/at803x.c
  11 @@ -62,8 +62,10 @@
  12
  13  #define ATH8030_PHY_ID 0x004dd076
  14  #define ATH8031_PHY_ID 0x004dd074
  15 +#define ATH8032_PHY_ID 0x004dd023
  16  #define ATH8035_PHY_ID 0x004dd072
  17  #define AT803X_PHY_ID_MASK                     0xffffffef
  18 +#define AT8032_PHY_ID_MASK                     0xffffffff
  19
  20  MODULE_DESCRIPTION("Atheros 803x PHY driver");
  21  MODULE_AUTHOR("Matus Ujhelyi");
  22 @@ -256,7 +258,8 @@ static int at803x_probe(struct phy_devic
  23         if (!priv)
  24                 return -ENOMEM;
  25
  26 -       if (phydev->drv->phy_id != ATH8030_PHY_ID)
  27 +       if (phydev->drv->phy_id != ATH8030_PHY_ID &&
  28 +           phydev->drv->phy_id != ATH8032_PHY_ID)
  29                 goto does_not_require_reset_workaround;
  30
  31         gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
  32 @@ -332,7 +335,7 @@ static void at803x_link_change_notify(st
  33         struct at803x_priv *priv = phydev->priv;
  34
  35         /*
  36 -        * Conduct a hardware reset for AT8030 every time a link loss is
  37 +        * Conduct a hardware reset for AT8030/2 every time a link loss is
  38          * signalled. This is necessary to circumvent a hardware bug that
  39          * occurs when the cable is unplugged while TX packets are pending
  40          * in the FIFO. In such cases, the FIFO enters an error mode it
  41 @@ -444,6 +447,24 @@ static struct phy_driver at803x_driver[]
  42         .aneg_done              = at803x_aneg_done,
  43         .ack_interrupt          = &at803x_ack_interrupt,
  44         .config_intr            = &at803x_config_intr,
  45 +}, {
  46 +       /* ATHEROS 8032 */
  47 +       .phy_id                 = ATH8032_PHY_ID,
  48 +       .name                   = "Atheros 8032 ethernet",
  49 +       .phy_id_mask            = AT8032_PHY_ID_MASK,
  50 +       .probe                  = at803x_probe,
  51 +       .config_init            = at803x_config_init,
  52 +       .link_change_notify     = at803x_link_change_notify,
  53 +       .set_wol                = at803x_set_wol,
  54 +       .get_wol                = at803x_get_wol,
  55 +       .suspend                = at803x_suspend,
  56 +       .resume                 = at803x_resume,
  57 +       .features               = PHY_BASIC_FEATURES,
  58 +       .flags                  = PHY_HAS_INTERRUPT,
  59 +       .config_aneg            = genphy_config_aneg,
  60 +       .read_status            = genphy_read_status,
  61 +       .ack_interrupt          = at803x_ack_interrupt,
  62 +       .config_intr            = at803x_config_intr,
  63  } };
  64
  65  module_phy_driver(at803x_driver);
  66 @@ -451,6 +472,7 @@ module_phy_driver(at803x_driver);
  67  static struct mdio_device_id __maybe_unused atheros_tbl[] = {
  68         { ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
  69         { ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
  70 +       { ATH8032_PHY_ID, AT8032_PHY_ID_MASK },
  71         { ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
  72         { }
  73  };