target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

   1 #!/bin/sh
   2
   3 [ -e /lib/firmware/$FIRMWARE ] && exit 0
   4
   5 . /lib/functions/caldata.sh
   6
   7 board=$(board_name)
   8
   9 case "$FIRMWARE" in
  10 "ath10k/cal-pci-0000:01:00.0.bin")
  11         case "$board" in
  12         meraki,mr33)
  13                 caldata_extract_ubi "ART" 0x9000 0x844
  14                 caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
  15                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
  16                 ;;
  17         esac
  18         ;;
  19 "ath10k/pre-cal-pci-0000:01:00.0.bin")
  20         case "$board" in
  21         asus,map-ac2200)
  22                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  23                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
  24                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
  25                 ;;
  26         avm,fritzrepeater-3000)
  27                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  28                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  29                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  30                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  31                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  32                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  33                 ;;
  34         buffalo,wtr-m2133hp)
  35                 caldata_extract "ART" 0x9000 0x2f20
  36                 ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x32)
  37                 ;;
  38         engenius,eap2200 |\
  39         openmesh,a62 |\
  40         plasmacloud,pa2200)
  41                 caldata_extract "0:ART" 0x9000 0x2f20
  42                 ;;
  43         linksys,ea8300 |\
  44         linksys,mr8300)
  45                 caldata_extract "ART" 0x9000 0x2f20
  46                 # OEM assigns 4 sequential MACs
  47                 ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
  48                 ;;
  49         esac
  50         ;;
  51 "ath10k/pre-cal-ahb-a000000.wifi.bin")
  52         case "$board" in
  53         8dev,habanero-dvk |\
  54         8dev,jalapeno |\
  55         alfa-network,ap120c-ac |\
  56         cilab,meshpoint-one |\
  57         ezviz,cs-w3-wd1200g-eup |\
  58         glinet,gl-ap1300 |\
  59         glinet,gl-b1300 |\
  60         glinet,gl-s1300 |\
  61         linksys,ea6350v3 |\
  62         mobipromo,cm520-79f |\
  63         qcom,ap-dk01.1-c1)
  64                 caldata_extract "ART" 0x1000 0x2f20
  65                 ;;
  66         aruba,ap-303 |\
  67         aruba,ap-303h |\
  68         aruba,ap-365)
  69                 caldata_extract "ART" 0x1000 0x2f20
  70                 ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
  71                 ;;
  72         asus,map-ac2200)
  73                 caldata_extract_ubi "Factory" 0x1000 0x2f20
  74                 ;;
  75         asus,rt-ac58u)
  76                 CI_UBIPART=UBI_DEV
  77                 caldata_extract_ubi "Factory" 0x1000 0x2f20
  78                 ;;
  79         avm,fritzbox-4040)
  80                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
  81                 ;;
  82         avm,fritzbox-7530 |\
  83         avm,fritzrepeater-1200 |\
  84         avm,fritzrepeater-3000)
  85                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  86                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  87                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  88                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  89                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  90                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  91                 ;;
  92         buffalo,wtr-m2133hp)
  93                 caldata_extract "ART" 0x1000 0x2f20
  94                 ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x26)
  95                 ;;
  96         cellc,rtl30vw |\
  97         compex,wpj419 |\
  98         compex,wpj428 |\
  99         edgecore,ecw5211 |\
 100         edgecore,oap100 |\
 101         engenius,eap1300 |\
 102         engenius,eap2200 |\
 103         luma,wrtq-329acn|\
 104         openmesh,a42 |\
 105         openmesh,a62 |\
 106         plasmacloud,pa1200 |\
 107         plasmacloud,pa2200 |\
 108         qxwlan,e2600ac-c1 |\
 109         qxwlan,e2600ac-c2 |\
 110         unielec,u4019-32m)
 111                 caldata_extract "0:ART" 0x1000 0x2f20
 112                 ;;
 113         devolo,magic-2-wifi-next)
 114                 caldata_extract "ART" 0x1000 0x2f20
 115                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
 116                 ;;
 117         dlink,dap-2610)
 118                 caldata_extract "ART" 0x1000 0x2f20
 119                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
 120                 ;;
 121         engenius,emd1)
 122                 caldata_extract "0:ART" 0x1000 0x2f20
 123                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
 124                 ;;
 125         engenius,emr3500)
 126                 caldata_extract "0:ART" 0x1000 0x2f20
 127                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
 128                 ;;
 129         engenius,ens620ext)
 130                 caldata_extract "ART" 0x1000 0x2f20
 131                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
 132                 ;;
 133         linksys,ea8300 |\
 134         linksys,mr8300)
 135                 caldata_extract "ART" 0x1000 0x2f20
 136                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
 137                 ;;
 138         meraki,mr33)
 139                 caldata_extract_ubi "ART" 0x1000 0x2f20
 140                 caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
 141                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
 142                 ;;
 143         mikrotik,hap-ac2)
 144                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 145                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
 146                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
 147                 ;;
 148         netgear,ex6100v2 |\
 149         netgear,ex6150v2)
 150                 caldata_extract "ART" 0x1000 0x2f20
 151                 ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
 152                 ;;
 153         netgear,wac510)
 154                 caldata_extract "0:ART" 0x1000 0x2f20
 155                 ath10k_patch_mac $(mtd_get_mac_binary "0:MANUDATA" 0x6)
 156                 ;;
 157         zyxel,nbg6617 |\
 158         zyxel,wre6606)
 159                 caldata_extract "ART" 0x1000 0x2f20
 160                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 161                 ;;
 162         esac
 163         ;;
 164 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 165         case "$board" in
 166         8dev,habanero-dvk |\
 167         8dev,jalapeno |\
 168         alfa-network,ap120c-ac |\
 169         cilab,meshpoint-one |\
 170         ezviz,cs-w3-wd1200g-eup |\
 171         glinet,gl-ap1300 |\
 172         glinet,gl-b1300 |\
 173         glinet,gl-s1300 |\
 174         linksys,ea6350v3 |\
 175         mobipromo,cm520-79f |\
 176         qcom,ap-dk01.1-c1)
 177                 caldata_extract "ART" 0x5000 0x2f20
 178                 ;;
 179         aruba,ap-303 |\
 180         aruba,ap-303h |\
 181         aruba,ap-365)
 182                 caldata_extract "ART" 0x5000 0x2f20
 183                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
 184                 ;;
 185         asus,map-ac2200)
 186                 caldata_extract_ubi "Factory" 0x5000 0x2f20
 187                 ;;
 188         asus,rt-ac58u)
 189                 CI_UBIPART=UBI_DEV
 190                 caldata_extract_ubi "Factory" 0x5000 0x2f20
 191                 ;;
 192         avm,fritzbox-4040)
 193                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 194                 ;;
 195         avm,fritzbox-7530 |\
 196         avm,fritzrepeater-1200 |\
 197         avm,fritzrepeater-3000)
 198                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 199                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 200                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 201                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 202                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 203                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 204                 ;;
 205         buffalo,wtr-m2133hp)
 206                 caldata_extract "ART" 0x5000 0x2f20
 207                 ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x2c)
 208                 ;;
 209         cellc,rtl30vw |\
 210         compex,wpj419 |\
 211         compex,wpj428 |\
 212         edgecore,ecw5211 |\
 213         edgecore,oap100 |\
 214         engenius,eap1300 |\
 215         engenius,eap2200 |\
 216         luma,wrtq-329acn|\
 217         openmesh,a42 |\
 218         openmesh,a62 |\
 219         plasmacloud,pa1200 |\
 220         plasmacloud,pa2200 |\
 221         qxwlan,e2600ac-c1 |\
 222         qxwlan,e2600ac-c2 |\
 223         unielec,u4019-32m)
 224                 caldata_extract "0:ART" 0x5000 0x2f20
 225                 ;;
 226         devolo,magic-2-wifi-next)
 227                 caldata_extract "ART" 0x5000 0x2f20
 228                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
 229                 ;;
 230         dlink,dap-2610)
 231                 caldata_extract "ART" 0x5000 0x2f20
 232                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
 233                 ;;
 234         engenius,emd1)
 235                 caldata_extract "0:ART" 0x5000 0x2f20
 236                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) +1)
 237                 ;;
 238         engenius,emr3500)
 239                 caldata_extract "0:ART" 0x5000 0x2f20
 240                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
 241                 ;;
 242         engenius,ens620ext)
 243                 caldata_extract "ART" 0x5000 0x2f20
 244                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
 245                 ;;
 246         linksys,ea8300 |\
 247         linksys,mr8300)
 248                 caldata_extract "ART" 0x5000 0x2f20
 249                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
 250                 ;;
 251         meraki,mr33)
 252                 caldata_extract_ubi "ART" 0x5000 0x2f20
 253                 caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
 254                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
 255                 ;;
 256         mikrotik,hap-ac2|\
 257         mikrotik,sxtsq-5-ac)
 258                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 259                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
 260                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
 261                 ;;
 262         netgear,ex6100v2 |\
 263         netgear,ex6150v2)
 264                 caldata_extract "ART" 0x5000 0x2f20
 265                 ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
 266                 ;;
 267         netgear,wac510)
 268                 caldata_extract "0:ART" 0x5000 0x2f20
 269                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) +16)
 270                 ;;
 271         zyxel,nbg6617 |\
 272         zyxel,wre6606)
 273                 caldata_extract "ART" 0x5000 0x2f20
 274                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
 275                 ;;
 276         esac
 277         ;;
 278 *)
 279         exit 1
 280         ;;
 281 esac