target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

   1 #!/bin/sh
   2
   3 [ -e /lib/firmware/$FIRMWARE ] && exit 0
   4
   5 . /lib/functions/caldata.sh
   6
   7 board=$(board_name)
   8
   9 case "$FIRMWARE" in
  10 "ath10k/cal-pci-0000:01:00.0.bin")
  11         case "$board" in
  12         meraki,mr33)
  13                 caldata_extract_ubi "ART" 0x9000 0x844
  14                 caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
  15                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
  16                 ;;
  17         esac
  18         ;;
  19 "ath10k/pre-cal-pci-0000:01:00.0.bin")
  20         case "$board" in
  21         asus,map-ac2200)
  22                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  23                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
  24                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
  25                 ;;
  26         avm,fritzrepeater-3000)
  27                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  28                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  29                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  30                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  31                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  32                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  33                 ;;
  34         engenius,eap2200 |\
  35         openmesh,a62)
  36                 caldata_extract "0:ART" 0x9000 0x2f20
  37                 ;;
  38         linksys,ea8300)
  39                 caldata_extract "ART" 0x9000 0x2f20
  40                 # OEM assigns 4 sequential MACs
  41                 ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
  42                 ;;
  43         esac
  44         ;;
  45 "ath10k/pre-cal-ahb-a000000.wifi.bin")
  46         case "$board" in
  47         8dev,jalapeno |\
  48         alfa-network,ap120c-ac |\
  49         cilab,meshpoint-one |\
  50         ezviz,cs-w3-wd1200g-eup |\
  51         glinet,gl-b1300 |\
  52         linksys,ea6350v3 |\
  53         qcom,ap-dk01.1-c1)
  54                 caldata_extract "ART" 0x1000 0x2f20
  55                 ;;
  56         aruba,ap-303 |\
  57         aruba,ap-303h)
  58                 caldata_extract "ART" 0x1000 0x2f20
  59                 ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
  60                 ;;
  61         asus,map-ac2200)
  62                 caldata_extract_ubi "Factory" 0x1000 0x2f20
  63                 ;;
  64         asus,rt-ac58u)
  65                 CI_UBIPART=UBI_DEV
  66                 caldata_extract_ubi "Factory" 0x1000 0x2f20
  67                 ;;
  68         avm,fritzbox-4040)
  69                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
  70                 ;;
  71         avm,fritzbox-7530 |\
  72         avm,fritzrepeater-1200 |\
  73         avm,fritzrepeater-3000)
  74                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  75                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  76                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  77                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  78                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  79                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  80                 ;;
  81         compex,wpj419 |\
  82         compex,wpj428 |\
  83         engenius,eap1300 |\
  84         engenius,eap2200 |\
  85         openmesh,a42 |\
  86         openmesh,a62 |\
  87         qxwlan,e2600ac-c1 |\
  88         qxwlan,e2600ac-c2 |\
  89         unielec,u4019-32m)
  90                 caldata_extract "0:ART" 0x1000 0x2f20
  91                 ;;
  92         dlink,dap-2610)
  93                 caldata_extract "ART" 0x1000 0x2f20
  94                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
  95                 ;;
  96         engenius,emd1)
  97                 caldata_extract "0:ART" 0x1000 0x2f20
  98                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
  99                 ;;
 100         engenius,ens620ext)
 101                 caldata_extract "ART" 0x1000 0x2f20
 102                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
 103                 ;;
 104         linksys,ea8300)
 105                 caldata_extract "ART" 0x1000 0x2f20
 106                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
 107                 ;;
 108         meraki,mr33)
 109                 caldata_extract_ubi "ART" 0x1000 0x2f20
 110                 caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
 111                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
 112                 ;;
 113         netgear,ex6100v2 |\
 114         netgear,ex6150v2)
 115                 caldata_extract "ART" 0x1000 0x2f20
 116                 ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
 117                 ;;
 118         zyxel,nbg6617 |\
 119         zyxel,wre6606)
 120                 caldata_extract "ART" 0x1000 0x2f20
 121                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 122                 ;;
 123         esac
 124         ;;
 125 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 126         case "$board" in
 127         8dev,jalapeno |\
 128         alfa-network,ap120c-ac |\
 129         cilab,meshpoint-one |\
 130         ezviz,cs-w3-wd1200g-eup |\
 131         glinet,gl-b1300 |\
 132         linksys,ea6350v3 |\
 133         qcom,ap-dk01.1-c1)
 134                 caldata_extract "ART" 0x5000 0x2f20
 135                 ;;
 136         aruba,ap-303 |\
 137         aruba,ap-303h)
 138                 caldata_extract "ART" 0x5000 0x2f20
 139                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
 140                 ;;
 141         asus,map-ac2200)
 142                 caldata_extract_ubi "Factory" 0x5000 0x2f20
 143                 ;;
 144         asus,rt-ac58u)
 145                 CI_UBIPART=UBI_DEV
 146                 caldata_extract_ubi "Factory" 0x5000 0x2f20
 147                 ;;
 148         avm,fritzbox-4040)
 149                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 150                 ;;
 151         avm,fritzbox-7530 |\
 152         avm,fritzrepeater-1200 |\
 153         avm,fritzrepeater-3000)
 154                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 155                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 156                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 157                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 158                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 159                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 160                 ;;
 161         compex,wpj419 |\
 162         compex,wpj428 |\
 163         engenius,eap1300 |\
 164         engenius,eap2200 |\
 165         openmesh,a42 |\
 166         openmesh,a62 |\
 167         qxwlan,e2600ac-c1 |\
 168         qxwlan,e2600ac-c2 |\
 169         unielec,u4019-32m)
 170                 caldata_extract "0:ART" 0x5000 0x2f20
 171                 ;;
 172         dlink,dap-2610)
 173                 caldata_extract "ART" 0x5000 0x2f20
 174                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
 175                 ;;
 176         engenius,emd1)
 177                 caldata_extract "0:ART" 0x5000 0x2f20
 178                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) +1)
 179                 ;;
 180         engenius,ens620ext)
 181                 caldata_extract "ART" 0x5000 0x2f20
 182                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
 183                 ;;
 184         linksys,ea8300)
 185                 caldata_extract "ART" 0x5000 0x2f20
 186                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
 187                 ;;
 188         meraki,mr33)
 189                 caldata_extract_ubi "ART" 0x5000 0x2f20
 190                 caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
 191                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
 192                 ;;
 193         netgear,ex6100v2 |\
 194         netgear,ex6150v2)
 195                 caldata_extract "ART" 0x5000 0x2f20
 196                 ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
 197                 ;;
 198         zyxel,nbg6617 |\
 199         zyxel,wre6606)
 200                 caldata_extract "ART" 0x5000 0x2f20
 201                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
 202                 ;;
 203         esac
 204         ;;
 205 *)
 206         exit 1
 207         ;;
 208 esac