target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

   1 #!/bin/sh
   2
   3 [ -e /lib/firmware/$FIRMWARE ] && exit 0
   4
   5 . /lib/functions/caldata.sh
   6
   7 board=$(board_name)
   8
   9 case "$FIRMWARE" in
  10 "ath10k/cal-pci-0000:01:00.0.bin")
  11         case "$board" in
  12         meraki,mr33 |\
  13         meraki,mr74)
  14                 caldata_extract_ubi "ART" 0x9000 0x844
  15                 caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
  16                 ;;
  17         esac
  18         ;;
  19 "ath10k/pre-cal-pci-0000:01:00.0.bin")
  20         case "$board" in
  21         asus,map-ac2200)
  22                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  23                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
  24                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
  25                 ;;
  26         asus,rt-ac42u)
  27                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  28                 ;;
  29         avm,fritzrepeater-3000)
  30                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  31                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  32                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  33                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  34                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  35                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  36                 ;;
  37         openmesh,a62 |\
  38         plasmacloud,pa2200)
  39                 caldata_extract "0:ART" 0x9000 0x2f20
  40                 ;;
  41         linksys,ea8300 |\
  42         linksys,mr8300)
  43                 caldata_extract "ART" 0x9000 0x2f20
  44                 # OEM assigns 4 sequential MACs
  45                 ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
  46                 ;;
  47         netgear,rbr50|\
  48         netgear,rbs50|\
  49         netgear,srr60|\
  50         netgear,srs60)
  51                 caldata_extract_mmc "0:ART" 0x9000 0x2f20
  52                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x12)
  53                 ;;
  54         esac
  55         ;;
  56 "ath10k/pre-cal-ahb-a000000.wifi.bin")
  57         case "$board" in
  58         qcom,ap-dk01.1-c1)
  59                 caldata_extract "ART" 0x1000 0x2f20
  60                 ;;
  61         asus,map-ac2200|\
  62         asus,rt-ac42u|\
  63         asus,rt-ac58u)
  64                 caldata_extract_ubi "Factory" 0x1000 0x2f20
  65                 ;;
  66         avm,fritzbox-4040)
  67                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
  68                 ;;
  69         avm,fritzbox-7530 |\
  70         avm,fritzrepeater-1200 |\
  71         avm,fritzrepeater-3000)
  72                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  73                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  74                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  75                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  76                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  77                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  78                 ;;
  79         cellc,rtl30vw |\
  80         openmesh,a62 |\
  81         plasmacloud,pa1200 |\
  82         plasmacloud,pa2200)
  83                 caldata_extract "0:ART" 0x1000 0x2f20
  84                 ;;
  85         devolo,magic-2-wifi-next)
  86                 caldata_extract "ART" 0x1000 0x2f20
  87                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
  88                 ;;
  89         dlink,dap-2610)
  90                 caldata_extract "ART" 0x1000 0x2f20
  91                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
  92                 ;;
  93         engenius,emd1)
  94                 caldata_extract "0:ART" 0x1000 0x2f20
  95                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
  96                 ;;
  97         engenius,emr3500)
  98                 caldata_extract "0:ART" 0x1000 0x2f20
  99                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
 100                 ;;
 101         engenius,ens620ext)
 102                 caldata_extract "ART" 0x1000 0x2f20
 103                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
 104                 ;;
 105         extreme-networks,ws-ap3915i)
 106                 caldata_extract "ART" 0x1000 0x2f20
 107                 ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR0)
 108                 ;;
 109         linksys,ea8300 |\
 110         linksys,mr8300)
 111                 caldata_extract "ART" 0x1000 0x2f20
 112                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
 113                 ;;
 114         meraki,mr33 |\
 115         meraki,mr74)
 116                 caldata_extract_ubi "ART" 0x1000 0x2f20
 117                 caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
 118                 ;;
 119         mikrotik,cap-ac |\
 120         mikrotik,hap-ac2 |\
 121         mikrotik,hap-ac3 |\
 122         mikrotik,hap-ac3-lte6-kit |\
 123         mikrotik,wap-ac)
 124                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 125                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
 126                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
 127                 ;;
 128         netgear,rbr50|\
 129         netgear,rbs50|\
 130         netgear,srr60|\
 131         netgear,srs60)
 132                 caldata_extract_mmc "0:ART" 0x1000 0x2f20
 133                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
 134                 ;;
 135         pakedge,wr-1)
 136                 caldata_extract "0:ART" 0x1000 0x2f20
 137                 ath10k_patch_mac $(macaddr_add $(get_mac_label) 2)
 138                 ;;
 139         teltonika,rutx10)
 140                 caldata_extract "0:ART" 0x1000 0x2f20
 141                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
 142                 ;;
 143         sony,ncp-hg100-cellular)
 144                 caldata_extract_mmc "0:ART" 0x1000 0x2f20
 145                 ;;
 146         zyxel,nbg6617 |\
 147         zyxel,wre6606)
 148                 caldata_extract "ART" 0x1000 0x2f20
 149                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 150                 ;;
 151         esac
 152         ;;
 153 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 154         case "$board" in
 155         qcom,ap-dk01.1-c1)
 156                 caldata_extract "ART" 0x5000 0x2f20
 157                 ;;
 158         asus,map-ac2200|\
 159         asus,rt-ac58u)
 160                 caldata_extract_ubi "Factory" 0x5000 0x2f20
 161                 ;;
 162         avm,fritzbox-4040)
 163                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 164                 ;;
 165         avm,fritzbox-7530 |\
 166         avm,fritzrepeater-1200 |\
 167         avm,fritzrepeater-3000)
 168                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 169                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 170                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 171                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 172                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 173                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 174                 ;;
 175         cellc,rtl30vw |\
 176         openmesh,a62 |\
 177         plasmacloud,pa1200 |\
 178         plasmacloud,pa2200)
 179                 caldata_extract "0:ART" 0x5000 0x2f20
 180                 ;;
 181         devolo,magic-2-wifi-next)
 182                 caldata_extract "ART" 0x5000 0x2f20
 183                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
 184                 ;;
 185         dlink,dap-2610)
 186                 caldata_extract "ART" 0x5000 0x2f20
 187                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
 188                 ;;
 189         engenius,emd1)
 190                 caldata_extract "0:ART" 0x5000 0x2f20
 191                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1)
 192                 ;;
 193         engenius,emr3500)
 194                 caldata_extract "0:ART" 0x5000 0x2f20
 195                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1)
 196                 ;;
 197         engenius,ens620ext)
 198                 caldata_extract "ART" 0x5000 0x2f20
 199                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
 200                 ;;
 201         extreme-networks,ws-ap3915i)
 202                 caldata_extract "ART" 0x5000 0x2f20
 203                 ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR1)
 204                 ;;
 205         linksys,ea8300 |\
 206         linksys,mr8300)
 207                 caldata_extract "ART" 0x5000 0x2f20
 208                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
 209                 ;;
 210         meraki,mr33 |\
 211         meraki,mr74)
 212                 caldata_extract_ubi "ART" 0x5000 0x2f20
 213                 caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
 214                 ;;
 215         mikrotik,cap-ac |\
 216         mikrotik,hap-ac2 |\
 217         mikrotik,hap-ac3 |\
 218         mikrotik,hap-ac3-lte6-kit |\
 219         mikrotik,sxtsq-5-ac |\
 220         mikrotik,wap-ac)
 221                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 222                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
 223                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
 224                 ;;
 225         netgear,rbr50|\
 226         netgear,rbs50|\
 227         netgear,srr60|\
 228         netgear,srs60)
 229                 caldata_extract_mmc "0:ART" 0x5000 0x2f20
 230                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
 231                 ;;
 232         pakedge,wr-1)
 233                 caldata_extract "0:ART" 0x5000 0x2f20
 234                 ath10k_patch_mac $(macaddr_add $(get_mac_label) 4)
 235                 ;;
 236         teltonika,rutx10)
 237                 caldata_extract "0:ART" 0x5000 0x2f20
 238                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
 239                 ;;
 240         sony,ncp-hg100-cellular)
 241                 caldata_extract_mmc "0:ART" 0x5000 0x2f20
 242                 ;;
 243         zyxel,nbg6617 |\
 244         zyxel,wre6606)
 245                 caldata_extract "ART" 0x5000 0x2f20
 246                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
 247                 ;;
 248         esac
 249         ;;
 250 "ath10k/QCA4019/hw1.0/board-ahb-a000000.wifi.bin")
 251         case "$board" in
 252         mikrotik,cap-ac |\
 253         mikrotik,hap-ac2 |\
 254         mikrotik,hap-ac3 |\
 255         mikrotik,hap-ac3-lte6-kit |\
 256         mikrotik,wap-ac)
 257                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 258                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
 259                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 )
 260                 ;;
 261         esac
 262         ;;
 263 "ath10k/QCA4019/hw1.0/board-ahb-a800000.wifi.bin")
 264         case "$board" in
 265         mikrotik,cap-ac |\
 266         mikrotik,hap-ac2 |\
 267         mikrotik,hap-ac3 |\
 268         mikrotik,hap-ac3-lte6-kit |\
 269         mikrotik,sxtsq-5-ac |\
 270         mikrotik,wap-ac)
 271                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 272                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \
 273                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 )
 274                 ;;
 275         esac
 276         ;;
 277 *)
 278         exit 1
 279         ;;
 280 esac