target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

   1 #!/bin/sh
   2
   3 [ -e /lib/firmware/$FIRMWARE ] && exit 0
   4
   5 . /lib/functions/caldata.sh
   6
   7 board=$(board_name)
   8
   9 case "$FIRMWARE" in
  10 "ath10k/cal-pci-0000:01:00.0.bin")
  11         case "$board" in
  12         meraki,mr33)
  13                 caldata_extract_ubi "ART" 0x9000 0x844
  14                 caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
  15                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1)
  16                 ;;
  17         esac
  18         ;;
  19 "ath10k/pre-cal-pci-0000:01:00.0.bin")
  20         case "$board" in
  21         asus,map-ac2200)
  22                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  23                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
  24                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
  25                 ;;
  26         asus,rt-ac42u)
  27                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  28                 ;;
  29         avm,fritzrepeater-3000)
  30                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  31                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  32                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  33                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  34                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  35                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  36                 ;;
  37         openmesh,a62 |\
  38         plasmacloud,pa2200)
  39                 caldata_extract "0:ART" 0x9000 0x2f20
  40                 ;;
  41         linksys,ea8300 |\
  42         linksys,mr8300)
  43                 caldata_extract "ART" 0x9000 0x2f20
  44                 # OEM assigns 4 sequential MACs
  45                 ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
  46                 ;;
  47         netgear,rbr50|\
  48         netgear,rbs50|\
  49         netgear,srr60|\
  50         netgear,srs60)
  51                 caldata_extract_mmc "0:ART" 0x9000 0x2f20
  52                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x12)
  53                 ;;
  54         esac
  55         ;;
  56 "ath10k/pre-cal-ahb-a000000.wifi.bin")
  57         case "$board" in
  58         qcom,ap-dk01.1-c1)
  59                 caldata_extract "ART" 0x1000 0x2f20
  60                 ;;
  61         asus,map-ac2200|\
  62         asus,rt-ac42u|\
  63         asus,rt-ac58u)
  64                 caldata_extract_ubi "Factory" 0x1000 0x2f20
  65                 ;;
  66         avm,fritzbox-4040)
  67                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
  68                 ;;
  69         avm,fritzbox-7530 |\
  70         avm,fritzrepeater-1200 |\
  71         avm,fritzrepeater-3000)
  72                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  73                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  74                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  75                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  76                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  77                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  78                 ;;
  79         cellc,rtl30vw |\
  80         openmesh,a42 |\
  81         openmesh,a62 |\
  82         plasmacloud,pa1200 |\
  83         plasmacloud,pa2200)
  84                 caldata_extract "0:ART" 0x1000 0x2f20
  85                 ;;
  86         devolo,magic-2-wifi-next)
  87                 caldata_extract "ART" 0x1000 0x2f20
  88                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
  89                 ;;
  90         dlink,dap-2610)
  91                 caldata_extract "ART" 0x1000 0x2f20
  92                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
  93                 ;;
  94         engenius,emd1)
  95                 caldata_extract "0:ART" 0x1000 0x2f20
  96                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
  97                 ;;
  98         engenius,emr3500)
  99                 caldata_extract "0:ART" 0x1000 0x2f20
 100                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
 101                 ;;
 102         engenius,ens620ext)
 103                 caldata_extract "ART" 0x1000 0x2f20
 104                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
 105                 ;;
 106         linksys,ea8300 |\
 107         linksys,mr8300)
 108                 caldata_extract "ART" 0x1000 0x2f20
 109                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
 110                 ;;
 111         meraki,mr33)
 112                 caldata_extract_ubi "ART" 0x1000 0x2f20
 113                 caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
 114                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2)
 115                 ;;
 116         mikrotik,cap-ac |\
 117         mikrotik,hap-ac2 |\
 118         mikrotik,hap-ac3)
 119                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 120                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
 121                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
 122                 ;;
 123         netgear,rbr50|\
 124         netgear,rbs50|\
 125         netgear,srr60|\
 126         netgear,srs60)
 127                 caldata_extract_mmc "0:ART" 0x1000 0x2f20
 128                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
 129                 ;;
 130         zyxel,nbg6617 |\
 131         zyxel,wre6606)
 132                 caldata_extract "ART" 0x1000 0x2f20
 133                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 134                 ;;
 135         esac
 136         ;;
 137 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 138         case "$board" in
 139         qcom,ap-dk01.1-c1)
 140                 caldata_extract "ART" 0x5000 0x2f20
 141                 ;;
 142         asus,map-ac2200|\
 143         asus,rt-ac58u)
 144                 caldata_extract_ubi "Factory" 0x5000 0x2f20
 145                 ;;
 146         avm,fritzbox-4040)
 147                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 148                 ;;
 149         avm,fritzbox-7530 |\
 150         avm,fritzrepeater-1200 |\
 151         avm,fritzrepeater-3000)
 152                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 153                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 154                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 155                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 156                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 157                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 158                 ;;
 159         cellc,rtl30vw |\
 160         openmesh,a42 |\
 161         openmesh,a62 |\
 162         plasmacloud,pa1200 |\
 163         plasmacloud,pa2200)
 164                 caldata_extract "0:ART" 0x5000 0x2f20
 165                 ;;
 166         devolo,magic-2-wifi-next)
 167                 caldata_extract "ART" 0x5000 0x2f20
 168                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
 169                 ;;
 170         dlink,dap-2610)
 171                 caldata_extract "ART" 0x5000 0x2f20
 172                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
 173                 ;;
 174         engenius,emd1)
 175                 caldata_extract "0:ART" 0x5000 0x2f20
 176                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1)
 177                 ;;
 178         engenius,emr3500)
 179                 caldata_extract "0:ART" 0x5000 0x2f20
 180                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1)
 181                 ;;
 182         engenius,ens620ext)
 183                 caldata_extract "ART" 0x5000 0x2f20
 184                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
 185                 ;;
 186         linksys,ea8300 |\
 187         linksys,mr8300)
 188                 caldata_extract "ART" 0x5000 0x2f20
 189                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
 190                 ;;
 191         meraki,mr33)
 192                 caldata_extract_ubi "ART" 0x5000 0x2f20
 193                 caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
 194                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3)
 195                 ;;
 196         mikrotik,cap-ac |\
 197         mikrotik,hap-ac2 |\
 198         mikrotik,hap-ac3 |\
 199         mikrotik,sxtsq-5-ac)
 200                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 201                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
 202                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
 203                 ;;
 204         netgear,rbr50|\
 205         netgear,rbs50|\
 206         netgear,srr60|\
 207         netgear,srs60)
 208                 caldata_extract_mmc "0:ART" 0x5000 0x2f20
 209                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
 210                 ;;
 211         zyxel,nbg6617 |\
 212         zyxel,wre6606)
 213                 caldata_extract "ART" 0x5000 0x2f20
 214                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
 215                 ;;
 216         esac
 217         ;;
 218 "ath10k/QCA4019/hw1.0/board-ahb-a000000.wifi.bin")
 219         case "$board" in
 220         mikrotik,cap-ac |\
 221         mikrotik,hap-ac2 |\
 222         mikrotik,hap-ac3)
 223                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 224                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
 225                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 )
 226                 ;;
 227         esac
 228         ;;
 229 "ath10k/QCA4019/hw1.0/board-ahb-a800000.wifi.bin")
 230         case "$board" in
 231         mikrotik,cap-ac |\
 232         mikrotik,hap-ac2 |\
 233         mikrotik,hap-ac3 |\
 234         mikrotik,sxtsq-5-ac)
 235                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 236                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \
 237                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 )
 238                 ;;
 239         esac
 240         ;;
 241 *)
 242         exit 1
 243         ;;
 244 esac