target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/input/linux-event-codes.h>
   7 #include <dt-bindings/soc/qcom,tcsr.h>
   8
   9 / {
  10         model = "ZyXEL NBG6617";
  11         compatible = "zyxel,nbg6617", "qcom,ipq4019";
  12
  13         chosen {
  14                 /*
  15                  * the vendor u-boot adds root and mtdparts cmdline parameters
  16                  * which we don't want... but we have to overwrite them or else
  17                  * the kernel will take them at face value.
  18                  */
  19                 bootargs-append = " mtdparts= root=31:13";
  20         };
  21
  22         aliases {
  23                 led-boot = &power;
  24                 led-failsafe = &power;
  25                 led-running = &power;
  26                 led-upgrade = &power;
  27         };
  28
  29         soc {
  30                 mdio@90000 {
  31                         status = "okay";
  32                 };
  33
  34                 ess-psgmii@98000 {
  35                         status = "okay";
  36                 };
  37
  38                 tcsr@1949000 {
  39                         compatible = "qcom,tcsr";
  40                         reg = <0x1949000 0x100>;
  41                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  42                 };
  43
  44                 tcsr@194b000 {
  45                         compatible = "qcom,tcsr";
  46                         reg = <0x194b000 0x100>;
  47                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  48                 };
  49
  50                 ess_tcsr@1953000 {
  51                         compatible = "qcom,tcsr";
  52                         reg = <0x1953000 0x1000>;
  53                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  54                 };
  55
  56                 tcsr@1957000 {
  57                         compatible = "qcom,tcsr";
  58                         reg = <0x1957000 0x100>;
  59                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  60                 };
  61
  62                 usb2@60f8800 {
  63                         status = "okay";
  64
  65                         dwc3@6000000 {
  66                                 #address-cells = <1>;
  67                                 #size-cells = <0>;
  68
  69                                 usb2_port1: port@1 {
  70                                         reg = <1>;
  71                                         #trigger-source-cells = <0>;
  72                                 };
  73                         };
  74                 };
  75
  76                 usb3@8af8800 {
  77                         status = "okay";
  78
  79                         dwc3@8a00000 {
  80                                 #address-cells = <1>;
  81                                 #size-cells = <0>;
  82
  83                                 usb3_port1: port@1 {
  84                                         reg = <1>;
  85                                         #trigger-source-cells = <0>;
  86                                 };
  87
  88                                 usb3_port2: port@2 {
  89                                         reg = <2>;
  90                                         #trigger-source-cells = <0>;
  91                                 };
  92                         };
  93                 };
  94
  95                 crypto@8e3a000 {
  96                         status = "okay";
  97                 };
  98
  99                 watchdog@b017000 {
 100                         status = "okay";
 101                 };
 102
 103                 ess-switch@c000000 {
 104                         status = "okay";
 105                 };
 106
 107                 edma@c080000 {
 108                         status = "okay";
 109                 };
 110         };
 111
 112         keys {
 113                 compatible = "gpio-keys";
 114
 115                 wlan {
 116                         label = "wlan";
 117                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 118                         linux,code = <KEY_RFKILL>;
 119                         linux,input-type = <EV_SW>;
 120                 };
 121
 122                 wps {
 123                         label = "wps";
 124                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 125                         linux,code = <KEY_WPS_BUTTON>;
 126                 };
 127
 128                 reset {
 129                         label = "reset";
 130                         gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
 131                         linux,code = <KEY_RESTART>;
 132                 };
 133         };
 134
 135         leds {
 136                 compatible = "gpio-leds";
 137                 pinctrl-0 = <&led_pins>;
 138                 pinctrl-names = "default";
 139
 140                 power: power {
 141                         label = "nbg6617:green:power";
 142                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 143                 };
 144
 145                 usb {
 146                         label = "nbg6617:green:usb";
 147                         gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 148                         trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
 149                         linux,default-trigger = "usbport";
 150                 };
 151
 152                 wlan2G {
 153                         label = "nbg6617:green:wlan2G";
 154                         gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
 155                 };
 156
 157                 wlan5G {
 158                         label = "nbg6617:green:wlan5G";
 159                         gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 160                 };
 161
 162                 wps {
 163                         label = "nbg6617:green:wps";
 164                         gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
 165                 };
 166         };
 167 };
 168
 169 &tlmm {
 170         serial_pins: serial_pinmux {
 171                 mux {
 172                         pins = "gpio60", "gpio61";
 173                         function = "blsp_uart0";
 174                         bias-disable;
 175                 };
 176         };
 177         spi_0_pins: spi_0_pinmux {
 178                 mux {
 179                         function = "blsp_spi0";
 180                         pins = "gpio55", "gpio56", "gpio57";
 181                         drive-strength = <12>;
 182                         bias-disable;
 183                 };
 184
 185                 mux_cs {
 186                         function = "gpio";
 187                         pins = "gpio54";
 188                         drive-strength = <2>;
 189                         bias-disable;
 190                         output-low;
 191                 };
 192         };
 193         led_pins: led_pinmux {
 194                 mux {
 195                         pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
 196                         drive-strength = <0x8>;
 197                         bias-disable;
 198                         output-low;
 199                 };
 200         };
 201 };
 202
 203 &blsp1_spi1 { /* BLSP1 QUP1 */
 204         pinctrl-0 = <&spi_0_pins>;
 205         pinctrl-names = "default";
 206         status = "okay";
 207         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 208
 209         mx25l25635f@0 {
 210                 compatible = "mx25l25635f", "jedec,spi-nor";
 211                 #address-cells = <1>;
 212                 #size-cells = <0>;
 213                 reg = <0>;
 214                 spi-max-frequency = <24000000>;
 215                 status = "okay";
 216                 m25p,fast-read;
 217
 218                 partitions {
 219                         compatible = "fixed-partitions";
 220                         #address-cells = <1>;
 221                         #size-cells = <1>;
 222
 223                         partition0@0 {
 224                                 label = "SBL1";
 225                                 reg = <0x00000000 0x00040000>;
 226                                 read-only;
 227                         };
 228                         partition1@40000 {
 229                                 label = "MIBIB";
 230                                 reg = <0x00040000 0x00020000>;
 231                                 read-only;
 232                         };
 233                         partition2@60000 {
 234                                 label = "QSEE";
 235                                 reg = <0x00060000 0x00060000>;
 236                                 read-only;
 237                         };
 238                         partition3@c0000 {
 239                                 label = "CDT";
 240                                 reg = <0x000c0000 0x00010000>;
 241                                 read-only;
 242                         };
 243                         partition4@d0000 {
 244                                 label = "DDRPARAMS";
 245                                 reg = <0x000d0000 0x00010000>;
 246                                 read-only;
 247                         };
 248                         partition5@e0000 {
 249                                 label = "APPSBL"; /* u-boot */
 250                                 reg = <0x000e0000 0x00080000>;
 251                                 /* U-Boot Standalone App "zloader" is located at 0x64000 */
 252                                 read-only;
 253                         };
 254                         partition6@160000 {
 255                                 label = "APPSBLENV"; /* u-boot env */
 256                                 reg = <0x00160000 0x00010000>;
 257                         };
 258                         partition7@170000 {
 259                                 /* make a backup of this partition! */
 260                                 label = "ART";
 261                                 reg = <0x00170000 0x00010000>;
 262                                 read-only;
 263                         };
 264                         partition8@180000 {
 265                                 label = "kernel";
 266                                 reg = <0x00180000 0x00400000>;
 267                         };
 268                         partition9@580000 {
 269                                 label = "dualflag";
 270                                 reg = <0x00580000 0x00010000>;
 271                                 read-only;
 272                         };
 273                         partition10@590000 {
 274                                 label = "header";
 275                                 reg = <0x00590000 0x00010000>;
 276                         };
 277                         partition11@5a0000 {
 278                                 label = "romd";
 279                                 reg = <0x005a0000 0x00100000>;
 280                                 read-only;
 281                         };
 282                         partition12@6a0000 {
 283                                 label = "not_root_data";
 284                                 /*
 285                                  * for some strange reason, someone at ZyXEL
 286                                  * had the "great" idea to put the rootfs_data
 287                                  * in front of rootfs... Don't do that!
 288                                  * As a result this one, full MebiByte remains
 289                                  * unused.
 290                                  */
 291                                 reg = <0x006a0000 0x00100000>;
 292                         };
 293                         partition13@7a0000 {
 294                                 label = "rootfs";
 295                                 reg = <0x007a0000 0x01860000>;
 296                         };
 297                 };
 298         };
 299 };
 300
 301 &blsp1_uart1 {
 302         pinctrl-0 = <&serial_pins>;
 303         pinctrl-names = "default";
 304         status = "okay";
 305 };
 306
 307 &cryptobam {
 308         status = "okay";
 309 };
 310
 311 &blsp_dma {
 312         status = "okay";
 313 };
 314
 315 &wifi0 {
 316         status = "okay";
 317         qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
 318 };
 319
 320 &wifi1 {
 321         status = "okay";
 322         qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
 323 };
 324
 325 &usb3_ss_phy {
 326         status = "okay";
 327 };
 328
 329 &usb3_hs_phy {
 330         status = "okay";
 331 };
 332
 333 &usb2_hs_phy {
 334         status = "okay";
 335 };