target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "ASUS RT-AC58U";
  10         compatible = "asus,rt-ac58u", "qcom,ipq4019";
  11
  12         memory {
  13                 device_type = "memory";
  14                 reg = <0x80000000 0x8000000>;
  15         };
  16
  17         aliases {
  18                 led-boot = &power;
  19                 led-failsafe = &power;
  20                 led-running = &power;
  21                 led-upgrade = &power;
  22         };
  23
  24         chosen {
  25                 bootargs-append = " ubi.mtd=UBI_DEV";
  26         };
  27
  28         soc {
  29                 mdio@90000 {
  30                         status = "okay";
  31                 };
  32
  33                 ess-psgmii@98000 {
  34                         status = "okay";
  35                 };
  36
  37                 tcsr@1949000 {
  38                         compatible = "qcom,tcsr";
  39                         reg = <0x1949000 0x100>;
  40                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  41                 };
  42
  43                 tcsr@194b000 {
  44                         compatible = "qcom,tcsr";
  45                         reg = <0x194b000 0x100>;
  46                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  47                 };
  48
  49                 ess_tcsr@1953000 {
  50                         compatible = "qcom,tcsr";
  51                         reg = <0x1953000 0x1000>;
  52                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  53                 };
  54
  55                 tcsr@1957000 {
  56                         compatible = "qcom,tcsr";
  57                         reg = <0x1957000 0x100>;
  58                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  59                 };
  60
  61                 usb2@60f8800 {
  62                         status = "okay";
  63
  64                         dwc3@6000000 {
  65                                 #address-cells = <1>;
  66                                 #size-cells = <0>;
  67
  68                                 usb2_port1: port@1 {
  69                                         reg = <1>;
  70                                         #trigger-source-cells = <0>;
  71                                 };
  72                         };
  73                 };
  74
  75                 usb3@8af8800 {
  76                         status = "okay";
  77
  78                         dwc3@8a00000 {
  79                                 #address-cells = <1>;
  80                                 #size-cells = <0>;
  81
  82                                 usb3_port1: port@1 {
  83                                         reg = <1>;
  84                                         #trigger-source-cells = <0>;
  85                                 };
  86
  87                                 usb3_port2: port@2 {
  88                                         reg = <2>;
  89                                         #trigger-source-cells = <0>;
  90                                 };
  91                         };
  92                 };
  93
  94                 crypto@8e3a000 {
  95                         status = "okay";
  96                 };
  97
  98                 wifi@a000000 {
  99                         status = "okay";
 100                         qcom,ath10k-calibration-variant = "RT-AC58U";
 101                 };
 102
 103                 wifi@a800000 {
 104                         status = "okay";
 105                         qcom,ath10k-calibration-variant = "RT-AC58U";
 106                 };
 107
 108                 watchdog@b017000 {
 109                         status = "okay";
 110                 };
 111
 112                 ess-switch@c000000 {
 113                         status = "okay";
 114                 };
 115
 116                 edma@c080000 {
 117                         status = "okay";
 118                 };
 119         };
 120
 121         keys {
 122                 compatible = "gpio-keys";
 123
 124                 reset {
 125                         label = "reset";
 126                         gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
 127                         linux,code = <KEY_RESTART>;
 128                 };
 129
 130                 wps {
 131                         label = "wps";
 132                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 133                         linux,code = <KEY_WPS_BUTTON>;
 134                 };
 135         };
 136
 137         gpio-leds {
 138                 compatible = "gpio-leds";
 139
 140                 power: status {
 141                         label = "rt-ac58u:blue:status";
 142                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 143                 };
 144
 145                 wan {
 146                         label = "rt-ac58u:blue:wan";
 147                         gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
 148                 };
 149
 150                 wlan2G {
 151                         label = "rt-ac58u:blue:wlan2G";
 152                         gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
 153                 };
 154
 155                 wan5G {
 156                         label = "rt-ac58u:blue:wlan5G";
 157                         gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 158                 };
 159
 160                 usb {
 161                         label = "rt-ac58u:blue:usb";
 162                         gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 163                         trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>;
 164                         linux,default-trigger = "usbport";
 165                 };
 166
 167                 lan {
 168                         label = "rt-ac58u:blue:lan";
 169                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 170                 };
 171         };
 172 };
 173
 174 &cryptobam {
 175         status = "okay";
 176 };
 177
 178 &blsp_dma {
 179         status = "okay";
 180 };
 181
 182 &tlmm {
 183         serial_pins: serial_pinmux {
 184                 mux {
 185                         pins = "gpio60", "gpio61";
 186                         function = "blsp_uart0";
 187                         bias-disable;
 188                 };
 189         };
 190
 191         spi_0_pins: spi_0_pinmux {
 192                 mux {
 193                         function = "blsp_spi0";
 194                         pins = "gpio55", "gpio56", "gpio57";
 195                         drive-strength = <12>;
 196                         bias-disable;
 197                 };
 198
 199                 mux_cs {
 200                         function = "gpio";
 201                         pins = "gpio54", "gpio59";
 202                         drive-strength = <2>;
 203                         bias-disable;
 204                         output-high;
 205                 };
 206         };
 207 };
 208
 209 &blsp1_spi1 { /* BLSP1 QUP1 */
 210         pinctrl-0 = <&spi_0_pins>;
 211         pinctrl-names = "default";
 212         status = "okay";
 213         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
 214                    <&tlmm 59 GPIO_ACTIVE_HIGH>;
 215
 216         flash@0 {
 217                 #address-cells = <1>;
 218                 #size-cells = <0>;
 219                 /*
 220                  * U-boot looks for "n25q128a11" node,
 221                  * if we don't have it, it will spit out the following warning:
 222                  * "ipq: fdt fixup unable to find compatible node".
 223                  */
 224                 compatible = "jedec,spi-nor";
 225                 reg = <0>;
 226                 linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
 227                 spi-max-frequency = <24000000>;
 228
 229                 partitions {
 230                         compatible = "fixed-partitions";
 231                         #address-cells = <1>;
 232                         #size-cells = <1>;
 233
 234                         partition0@0 {
 235                                 label = "SBL1";
 236                                 reg = <0x00000000 0x00040000>;
 237                                 read-only;
 238                         };
 239                         partition1@40000 {
 240                                 label = "MIBIB";
 241                                 reg = <0x00040000 0x00020000>;
 242                                 read-only;
 243                         };
 244                         partition2@60000 {
 245                                 label = "QSEE";
 246                                 reg = <0x00060000 0x00060000>;
 247                                 read-only;
 248                         };
 249                         partition3@c0000 {
 250                                 label = "CDT";
 251                                 reg = <0x000c0000 0x00010000>;
 252                                 read-only;
 253                         };
 254                         partition4@d0000 {
 255                                 label = "DDRPARAMS";
 256                                 reg = <0x000d0000 0x00010000>;
 257                                 read-only;
 258                         };
 259                         partition5@e0000 {
 260                                 label = "APPSBLENV"; /* uboot env*/
 261                                 reg = <0x000e0000 0x00010000>;
 262                                 read-only;
 263                         };
 264                         partition5@f0000 {
 265                                 label = "APPSBL"; /* uboot */
 266                                 reg = <0x000f0000 0x00080000>;
 267                                 read-only;
 268                         };
 269                         partition5@170000 {
 270                                 label = "ART";
 271                                 reg = <0x00170000 0x00010000>;
 272                                 read-only;
 273                         };
 274                         /* 0x00180000 - 0x00200000 unused */
 275                 };
 276         };
 277
 278         flash@1 {
 279                 #address-cells = <1>;
 280                 #size-cells = <0>;
 281                 compatible = "spinand,mt29f";
 282                 reg = <1>;
 283                 spi-max-frequency = <24000000>;
 284
 285                 /*
 286                  * U-boot looks for "spinand,mt29f" node,
 287                  * if we don't have it, it will spit out the following warning:
 288                  * "ipq: fdt fixup unable to find compatible node".
 289                  */
 290
 291                 partitions {
 292                         compatible = "fixed-partitions";
 293                         #address-cells = <1>;
 294                         #size-cells = <1>;
 295
 296                         partition@0 {
 297                                 label = "ubi";
 298                                 reg = <0x00000000 0x08000000>;
 299                         };
 300                 };
 301         };
 302 };
 303
 304 &blsp1_uart1 {
 305         pinctrl-0 = <&serial_pins>;
 306         pinctrl-names = "default";
 307         status = "okay";
 308 };
 309
 310 &usb3_ss_phy {
 311         status = "okay";
 312 };
 313
 314 &usb3_hs_phy {
 315         status = "okay";
 316 };
 317
 318 &usb2_hs_phy {
 319         status = "okay";
 320 };