target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-qxwlan-e2600ac.dtsi

   1 /* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2  *
   3  * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
   4  *
   5  */
   6
   7 #include "qcom-ipq4019.dtsi"
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/input/input.h>
  10 #include <dt-bindings/soc/qcom,tcsr.h>
  11
  12 / {
  13
  14         model = "Qxwlan E2600AC";
  15         compatible = "qcom,ipq4019";
  16
  17         memory {
  18                 device_type = "memory";
  19                 reg = <0x80000000 0x10000000>; /* 256MB */
  20         };
  21
  22         soc {
  23                 mdio@90000 {
  24                         status = "okay";
  25                         pinctrl-0 = <&mdio_pins>;
  26                         pinctrl-names = "default";
  27                 };
  28
  29                 ess-psgmii@98000 {
  30                         status = "okay";
  31                 };
  32
  33                 tcsr@1949000 {
  34                         compatible = "qcom,tcsr";
  35                         reg = <0x1949000 0x100>;
  36                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  37                 };
  38
  39                 tcsr@194b000 {
  40                         /* select hostmode */
  41                         compatible = "qcom,tcsr";
  42                         reg = <0x194b000 0x100>;
  43                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  44                         status = "okay";
  45                 };
  46
  47                 ess_tcsr@1953000 {
  48                         compatible = "qcom,tcsr";
  49                         reg = <0x1953000 0x1000>;
  50                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  51                 };
  52
  53                 tcsr@1957000 {
  54                         compatible = "qcom,tcsr";
  55                         reg = <0x1957000 0x100>;
  56                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  57                 };
  58
  59                 usb2: usb2@60f8800 {
  60                         status = "okay";
  61
  62                         dwc3@6000000 {
  63                                 #address-cells = <1>;
  64                                 #size-cells = <0>;
  65
  66                                 usb2_port1: port@1 {
  67                                         reg = <1>;
  68                                         #trigger-source-cells = <0>;
  69                                 };
  70                         };
  71                 };
  72
  73                 serial@78af000 {
  74                         pinctrl-0 = <&serial_0_pins>;
  75                         pinctrl-names = "default";
  76                         status = "okay";
  77                 };
  78
  79                 serial@78b0000 {
  80                         pinctrl-0 = <&serial_1_pins>;
  81                         pinctrl-names = "default";
  82                         status = "okay";
  83                 };
  84
  85                 i2c@78b7000 { /* BLSP1 QUP2 */
  86                         pinctrl-0 = <&i2c_0_pins>;
  87                         pinctrl-names = "default";
  88
  89                         status = "okay";
  90                 };
  91
  92                 usb3: usb3@8af8800 {
  93                         status = "okay";
  94
  95                         dwc3@8a00000 {
  96                                 #address-cells = <1>;
  97                                 #size-cells = <0>;
  98
  99                                 usb3_port1: port@1 {
 100                                         reg = <1>;
 101                                         #trigger-source-cells = <0>;
 102                                 };
 103
 104                                 usb3_port2: port@2 {
 105                                         reg = <2>;
 106                                         #trigger-source-cells = <0>;
 107                                 };
 108                         };
 109                 };
 110
 111                 crypto@8e3a000 {
 112                         status = "okay";
 113                 };
 114
 115                 watchdog@b017000 {
 116                         status = "okay";
 117                 };
 118
 119                 ess-switch@c000000 {
 120                         status = "okay";
 121                 };
 122
 123                 edma@c080000 {
 124                         status = "okay";
 125                 };
 126
 127                 leds {
 128                         compatible = "gpio-leds";
 129
 130                         led1 {
 131                                 label = "e2600ac:green:wlan0";
 132                                 gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
 133                         };
 134
 135                         led2 {
 136                                 label = "e2600ac:green:wlan1";
 137                                 gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
 138                         };
 139
 140                         led3 {
 141                                 label = "e2600ac:green:usb";
 142                                 gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
 143                                 trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
 144                                 linux,default-trigger = "usbport";
 145                         };
 146
 147                         led4 {
 148                                 label = "e2600ac:green:ctrl1";
 149                                 gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
 150                         };
 151
 152                         led5 {
 153                                 label = "e2600ac:green:ctrl2";
 154                                 gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
 155                         };
 156
 157                         led6 {
 158                                 label = "e2600ac:green:ctrl3";
 159                                 gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
 160                         };
 161                 };
 162
 163                 keys {
 164                         compatible = "gpio-keys";
 165
 166                         reset {
 167                                 label = "reset";
 168                                 gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
 169                                 linux,code = <KEY_RESTART>;
 170                         };
 171                 };
 172         };
 173 };
 174
 175 &blsp_dma {
 176         status = "okay";
 177 };
 178
 179 &cryptobam {
 180         status = "okay";
 181 };
 182
 183 &qpic_bam {
 184         status = "okay";
 185 };
 186
 187 &tlmm {
 188         i2c_0_pins: i2c-0-pinmux {
 189                 mux {
 190                         pins = "gpio20", "gpio21";
 191                         function = "blsp_i2c0";
 192                         bias-disable;
 193                 };
 194         };
 195
 196         mdio_pins: mdio_pinmux {
 197                 mux_1 {
 198                         pins = "gpio6";
 199                         function = "mdio";
 200                         bias-pull-up;
 201                 };
 202                 mux_2 {
 203                         pins = "gpio7";
 204                         function = "mdc";
 205                         bias-pull-up;
 206                 };
 207         };
 208
 209         serial_0_pins: serial0-pinmux {
 210                 mux {
 211                         pins = "gpio16", "gpio17";
 212                         function = "blsp_uart0";
 213                         bias-disable;
 214                 };
 215         };
 216
 217         serial_1_pins: serial1_pinmux {
 218                 mux {
 219                         pins = "gpio8", "gpio9";
 220                         function = "blsp_uart1";
 221                         bias-disable;
 222                 };
 223         };
 224
 225         spi_0_pins: spi_0_pinmux {
 226                 pinmux {
 227                         function = "blsp_spi0";
 228                         pins = "gpio13", "gpio14", "gpio15";
 229                         drive-strength = <12>;
 230                         bias-disable;
 231                 };
 232                 pinmux_cs {
 233                         function = "gpio";
 234                         pins = "gpio12";
 235                         drive-strength = <2>;
 236                         bias-disable;
 237                         output-high;
 238                 };
 239         };
 240 };
 241
 242 &usb3_ss_phy {
 243         status = "okay";
 244 };
 245
 246 &usb3_hs_phy {
 247         status = "okay";
 248 };
 249
 250 &usb2_hs_phy {
 251         status = "okay";
 252 };
 253
 254 &wifi0 {
 255         status = "okay";
 256         qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
 257 };
 258
 259 &wifi1 {
 260         status = "okay";
 261         qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
 262 };