projects / openwrt / openwrt.git / blob
? search:


027500f03836c9262188efe72ba980b9d6f7f5f8
[openwrt/openwrt.git] / target / linux / ipq806x / files-4.19 / arch / arm / boot / dts / qcom-ipq8064-c2600.dts
1 #include "qcom-ipq8064-v2.0.dtsi"
2
3 #include <dt-bindings/input/input.h>
4
5 / {
6 model = "TP-Link Archer C2600";
7 compatible = "tplink,c2600", "qcom,ipq8064";
8
9 memory@0 {
10 reg = <0x42000000 0x1e000000>;
11 device_type = "memory";
12 };
13
14 reserved-memory {
15 #address-cells = <1>;
16 #size-cells = <1>;
17 ranges;
18 rsvd@41200000 {
19 reg = <0x41200000 0x300000>;
20 no-map;
21 };
22 };
23
24 aliases {
25 serial0 = &gsbi4_serial;
26 mdio-gpio0 = &mdio0;
27
28 led-boot = &power;
29 led-failsafe = &general;
30 led-running = &power;
31 led-upgrade = &general;
32 label-mac-device = &gmac2;
33 };
34
35 chosen {
36 stdout-path = "serial0:115200n8";
37 };
38
39 soc {
40 pinmux@800000 {
41 button_pins: button_pins {
42 mux {
43 pins = "gpio16", "gpio54", "gpio65";
44 function = "gpio";
45 drive-strength = <2>;
46 bias-pull-up;
47 };
48 };
49
50 i2c4_pins: i2c4_pinmux {
51 mux {
52 pins = "gpio12", "gpio13";
53 function = "gsbi4";
54 drive-strength = <12>;
55 bias-disable;
56 };
57 };
58
59 led_pins: led_pins {
60 mux {
61 pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
62 "gpio53", "gpio66";
63 function = "gpio";
64 drive-strength = <2>;
65 bias-pull-up;
66 };
67 };
68
69 spi_pins: spi_pins {
70 mux {
71 pins = "gpio18", "gpio19", "gpio21";
72 function = "gsbi5";
73 bias-pull-down;
74 };
75
76 data {
77 pins = "gpio18", "gpio19";
78 drive-strength = <10>;
79 };
80
81 cs {
82 pins = "gpio20";
83 function = "gpio";
84 drive-strength = <10>;
85 bias-pull-up;
86 };
87
88 clk {
89 pins = "gpio21";
90 drive-strength = <12>;
91 };
92 };
93
94 mdio0_pins: mdio0_pins {
95 mux {
96 pins = "gpio0", "gpio1";
97 function = "gpio";
98 drive-strength = <8>;
99 bias-disable;
100 };
101 };
102
103 rgmii2_pins: rgmii2_pins {
104 mux {
105 pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
106 "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
107 function = "rgmii2";
108 drive-strength = <8>;
109 bias-disable;
110 };
111 };
112
113 usb0_pwr_en_pin: usb0_pwr_en_pin {
114 mux {
115 pins = "gpio25";
116 function = "gpio";
117 drive-strength = <10>;
118 bias-pull-up;
119 output-high;
120 };
121 };
122
123 usb1_pwr_en_pin: usb1_pwr_en_pin {
124 mux {
125 pins = "gpio23";
126 function = "gpio";
127 drive-strength = <10>;
128 bias-pull-up;
129 output-high;
130 };
131 };
132 };
133
134 gsbi@16300000 {
135 qcom,mode = <GSBI_PROT_I2C_UART>;
136 status = "okay";
137 serial@16340000 {
138 status = "okay";
139 };
140 /*
141 * The i2c device on gsbi4 should not be enabled.
142 * On ipq806x designs gsbi4 i2c is meant for exclusive
143 * RPM usage. Turning this on in kernel manifests as
144 * i2c failure for the RPM.
145 */
146 };
147
148 gsbi5: gsbi@1a200000 {
149 qcom,mode = <GSBI_PROT_SPI>;
150 status = "okay";
151
152 spi5: spi@1a280000 {
153 status = "okay";
154
155 pinctrl-0 = <&spi_pins>;
156 pinctrl-names = "default";
157
158 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
159
160 flash: m25p80@0 {
161 compatible = "jedec,spi-nor";
162 #address-cells = <1>;
163 #size-cells = <1>;
164 spi-max-frequency = <50000000>;
165 reg = <0>;
166
167 SBL1@0 {
168 label = "SBL1";
169 reg = <0x0 0x20000>;
170 read-only;
171 };
172
173 MIBIB@20000 {
174 label = "MIBIB";
175 reg = <0x20000 0x20000>;
176 read-only;
177 };
178
179 SBL2@40000 {
180 label = "SBL2";
181 reg = <0x40000 0x20000>;
182 read-only;
183 };
184
185 SBL3@60000 {
186 label = "SBL3";
187 reg = <0x60000 0x30000>;
188 read-only;
189 };
190
191 DDRCONFIG@90000 {
192 label = "DDRCONFIG";
193 reg = <0x90000 0x10000>;
194 read-only;
195 };
196
197 SSD@a0000 {
198 label = "SSD";
199 reg = <0xa0000 0x10000>;
200 read-only;
201 };
202
203 TZ@b0000 {
204 label = "TZ";
205 reg = <0xb0000 0x30000>;
206 read-only;
207 };
208
209 RPM@e0000 {
210 label = "RPM";
211 reg = <0xe0000 0x20000>;
212 read-only;
213 };
214
215 fs-uboot@100000 {
216 label = "fs-uboot";
217 reg = <0x100000 0x70000>;
218 read-only;
219 };
220
221 uboot-env@170000 {
222 label = "uboot-env";
223 reg = <0x170000 0x40000>;
224 read-only;
225 };
226
227 radio@1b0000 {
228 label = "radio";
229 reg = <0x1b0000 0x40000>;
230 read-only;
231 };
232
233 os-image@1f0000 {
234 label = "os-image";
235 reg = <0x1f0000 0x400000>;
236 };
237
238 rootfs@5f0000 {
239 label = "rootfs";
240 reg = <0x5f0000 0x1900000>;
241 };
242
243 defaultmac: default-mac@1ef0000 {
244 label = "default-mac";
245 reg = <0x1ef0000 0x00200>;
246 read-only;
247 };
248
249 pin@1ef0200 {
250 label = "pin";
251 reg = <0x1ef0200 0x00200>;
252 read-only;
253 };
254
255 product-info@1ef0400 {
256 label = "product-info";
257 reg = <0x1ef0400 0x0fc00>;
258 read-only;
259 };
260
261 partition-table@1f00000 {
262 label = "partition-table";
263 reg = <0x1f00000 0x10000>;
264 read-only;
265 };
266
267 soft-version@1f10000 {
268 label = "soft-version";
269 reg = <0x1f10000 0x10000>;
270 read-only;
271 };
272
273 support-list@1f20000 {
274 label = "support-list";
275 reg = <0x1f20000 0x10000>;
276 read-only;
277 };
278
279 profile@1f30000 {
280 label = "profile";
281 reg = <0x1f30000 0x10000>;
282 read-only;
283 };
284
285 default-config@1f40000 {
286 label = "default-config";
287 reg = <0x1f40000 0x10000>;
288 read-only;
289 };
290
291 user-config@1f50000 {
292 label = "user-config";
293 reg = <0x1f50000 0x40000>;
294 read-only;
295 };
296
297 qos-db@1f90000 {
298 label = "qos-db";
299 reg = <0x1f90000 0x40000>;
300 read-only;
301 };
302
303 usb-config@1fd0000 {
304 label = "usb-config";
305 reg = <0x1fd0000 0x10000>;
306 read-only;
307 };
308
309 log@1fe0000 {
310 label = "log";
311 reg = <0x1fe0000 0x20000>;
312 read-only;
313 };
314 };
315 };
316 };
317
318 usb3_0: usb3@110f8800 {
319 status = "okay";
320
321 pinctrl-0 = <&usb0_pwr_en_pin>;
322 pinctrl-names = "default";
323 };
324
325 usb3_1: usb3@100f8800 {
326 status = "okay";
327
328 pinctrl-0 = <&usb1_pwr_en_pin>;
329 pinctrl-names = "default";
330 };
331
332 pcie0: pci@1b500000 {
333 status = "okay";
334 };
335
336 pcie1: pci@1b700000 {
337 status = "okay";
338 force_gen1 = <1>;
339 };
340
341 mdio0: mdio {
342 compatible = "virtual,mdio-gpio";
343 #address-cells = <1>;
344 #size-cells = <0>;
345 gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
346 <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
347 pinctrl-0 = <&mdio0_pins>;
348 pinctrl-names = "default";
349
350 phy0: ethernet-phy@0 {
351 reg = <0>;
352 qca,ar8327-initvals = <
353 0x00004 0x7600000 /* PAD0_MODE */
354 0x00008 0x1000000 /* PAD5_MODE */
355 0x0000c 0x80 /* PAD6_MODE */
356 0x000e4 0x6a545 /* MAC_POWER_SEL */
357 0x000e0 0xc74164de /* SGMII_CTRL */
358 0x0007c 0x4e /* PORT0_STATUS */
359 0x00094 0x4e /* PORT6_STATUS */
360 >;
361 };
362
363 phy4: ethernet-phy@4 {
364 reg = <4>;
365 };
366 };
367
368 gmac1: ethernet@37200000 {
369 status = "okay";
370 phy-mode = "rgmii";
371 qcom,id = <1>;
372
373 pinctrl-0 = <&rgmii2_pins>;
374 pinctrl-names = "default";
375
376 mtd-mac-address = <&defaultmac 0x8>;
377 mtd-mac-address-increment = <1>;
378
379 fixed-link {
380 speed = <1000>;
381 full-duplex;
382 };
383 };
384
385 gmac2: ethernet@37400000 {
386 status = "okay";
387 phy-mode = "sgmii";
388 qcom,id = <2>;
389
390 mtd-mac-address = <&defaultmac 0x8>;
391
392 fixed-link {
393 speed = <1000>;
394 full-duplex;
395 };
396 };
397 };
398
399 keys {
400 compatible = "gpio-keys";
401 pinctrl-0 = <&button_pins>;
402 pinctrl-names = "default";
403
404 wifi {
405 label = "wifi";
406 gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
407 linux,code = <KEY_RFKILL>;
408 };
409
410 reset {
411 label = "reset";
412 gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
413 linux,code = <KEY_RESTART>;
414 };
415
416 wps {
417 label = "wps";
418 gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
419 linux,code = <KEY_WPS_BUTTON>;
420 };
421
422 ledswitch {
423 label = "ledswitch";
424 gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
425 linux,code = <KEY_LIGHTS_TOGGLE>;
426 };
427 };
428
429 leds {
430 compatible = "gpio-leds";
431 pinctrl-0 = <&led_pins>;
432 pinctrl-names = "default";
433
434 lan {
435 label = "white:lan";
436 gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
437 };
438
439 usb4 {
440 label = "white:usb_4";
441 gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
442 };
443
444 usb2 {
445 label = "white:usb_2";
446 gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
447 };
448
449 wps {
450 label = "white:wps";
451 gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
452 };
453
454 wan_amber {
455 label = "amber:wan";
456 gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
457 };
458
459 wan_white {
460 label = "white:wan";
461 gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
462 };
463
464 power: power {
465 label = "white:power";
466 gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
467 default-state = "keep";
468 };
469
470 general: general {
471 label = "white:general";
472 gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
473 };
474 };
475 };
476
477 &adm_dma {
478 status = "okay";
479 };
OpenWrt Source Repository