target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts

   1 #include "qcom-ipq8064-v2.0.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "Netgear Nighthawk X4 D7800";
   7         compatible = "netgear,d7800", "qcom,ipq8064";
   8
   9         memory@0 {
  10                 reg = <0x42000000 0xe000000>;
  11                 device_type = "memory";
  12         };
  13
  14         reserved-memory {
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17                 ranges;
  18                 rsvd@41200000 {
  19                         reg = <0x41200000 0x300000>;
  20                         no-map;
  21                 };
  22         };
  23
  24         aliases {
  25                 serial0 = &gsbi4_serial;
  26                 mdio-gpio0 = &mdio0;
  27
  28                 led-boot = &power_white;
  29                 led-failsafe = &power_amber;
  30                 led-running = &power_white;
  31                 led-upgrade = &power_amber;
  32         };
  33
  34         chosen {
  35                 bootargs = "rootfstype=squashfs noinitrd";
  36                 stdout-path = "serial0:115200n8";
  37         };
  38
  39         soc {
  40                 pinmux@800000 {
  41                         button_pins: button_pins {
  42                                 mux {
  43                                         pins = "gpio6", "gpio54", "gpio65";
  44                                         function = "gpio";
  45                                         drive-strength = <2>;
  46                                         bias-pull-up;
  47                                 };
  48                         };
  49
  50                         i2c4_pins: i2c4_pinmux {
  51                                 mux {
  52                                         pins = "gpio12", "gpio13";
  53                                         function = "gsbi4";
  54                                         drive-strength = <12>;
  55                                         bias-disable;
  56                                 };
  57                         };
  58
  59                         led_pins: led_pins {
  60                                 mux {
  61                                         pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
  62                                                 "gpio24","gpio26", "gpio53", "gpio64";
  63                                         function = "gpio";
  64                                         drive-strength = <2>;
  65                                         bias-pull-up;
  66                                 };
  67                         };
  68
  69                         mdio0_pins: mdio0_pins {
  70                                 mux {
  71                                         pins = "gpio0", "gpio1";
  72                                         function = "gpio";
  73                                         drive-strength = <8>;
  74                                         bias-disable;
  75                                 };
  76                         };
  77
  78                         nand_pins: nand_pins {
  79                                 disable {
  80                                         pins = "gpio34", "gpio35", "gpio36",
  81                                                "gpio37", "gpio38";
  82                                         function = "nand";
  83                                         drive-strength = <10>;
  84                                         bias-disable;
  85                                 };
  86
  87                                 pullups {
  88                                         pins = "gpio39";
  89                                         function = "nand";
  90                                         drive-strength = <10>;
  91                                         bias-pull-up;
  92                                 };
  93
  94                                 hold {
  95                                         pins = "gpio40", "gpio41", "gpio42",
  96                                                "gpio43", "gpio44", "gpio45",
  97                                                "gpio46", "gpio47";
  98                                         function = "nand";
  99                                         drive-strength = <10>;
 100                                         bias-bus-hold;
 101                                 };
 102                         };
 103
 104                         rgmii2_pins: rgmii2_pins {
 105                                 mux {
 106                                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
 107                                                "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
 108                                         function = "rgmii2";
 109                                         drive-strength = <8>;
 110                                         bias-disable;
 111                                 };
 112                         };
 113
 114                         usb0_pwr_en_pins: usb0_pwr_en_pins {
 115                                 mux {
 116                                         pins = "gpio15";
 117                                         function = "gpio";
 118                                         drive-strength = <12>;
 119                                         bias-pull-down;
 120                                         output-high;
 121                                 };
 122                         };
 123
 124                         usb1_pwr_en_pins: usb1_pwr_en_pins {
 125                                 mux {
 126                                         pins = "gpio16", "gpio68";
 127                                         function = "gpio";
 128                                         drive-strength = <12>;
 129                                         bias-pull-down;
 130                                         output-high;
 131                                 };
 132                         };
 133                 };
 134
 135                 gsbi@16300000 {
 136                         qcom,mode = <GSBI_PROT_I2C_UART>;
 137                         status = "okay";
 138                         serial@16340000 {
 139                                 status = "okay";
 140                         };
 141                         /*
 142                          * The i2c device on gsbi4 should not be enabled.
 143                          * On ipq806x designs gsbi4 i2c is meant for exclusive
 144                          * RPM usage. Turning this on in kernel manifests as
 145                          * i2c failure for the RPM.
 146                          */
 147                 };
 148
 149                 sata-phy@1b400000 {
 150                         status = "okay";
 151                 };
 152
 153                 sata@29000000 {
 154                         ports-implemented = <0x1>;
 155                         status = "okay";
 156                 };
 157
 158                 usb3_0: usb3@110f8800 {
 159                         status = "okay";
 160
 161                         pinctrl-0 = <&usb0_pwr_en_pins>;
 162                         pinctrl-names = "default";
 163                 };
 164
 165                 usb3_1: usb3@100f8800 {
 166                         status = "okay";
 167
 168                         pinctrl-0 = <&usb1_pwr_en_pins>;
 169                         pinctrl-names = "default";
 170                 };
 171
 172                 pcie0: pci@1b500000 {
 173                         status = "okay";
 174                         reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
 175                         pinctrl-0 = <&pcie0_pins>;
 176                         pinctrl-names = "default";
 177                 };
 178
 179                 pcie1: pci@1b700000 {
 180                         status = "okay";
 181                         reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
 182                         pinctrl-0 = <&pcie1_pins>;
 183                         pinctrl-names = "default";
 184                         force_gen1 = <1>;
 185                 };
 186
 187                 nand@1ac00000 {
 188                         status = "okay";
 189
 190                         pinctrl-0 = <&nand_pins>;
 191                         pinctrl-names = "default";
 192
 193                         #address-cells = <1>;
 194                         #size-cells = <0>;
 195
 196                         cs0 {
 197                                 reg = <0>;
 198                                 compatible = "qcom,nandcs";
 199
 200                                 nand-ecc-strength = <4>;
 201                                 nand-bus-width = <8>;
 202                                 nand-ecc-step-size = <512>;
 203
 204                                 partitions {
 205                                         compatible = "fixed-partitions";
 206                                         #address-cells = <1>;
 207                                         #size-cells = <1>;
 208
 209                                         qcadata@0 {
 210                                                 label = "qcadata";
 211                                                 reg = <0x0000000 0x0c80000>;
 212                                                 read-only;
 213                                         };
 214
 215                                         APPSBL@c80000 {
 216                                                 label = "APPSBL";
 217                                                 reg = <0x0c80000 0x0500000>;
 218                                                 read-only;
 219                                         };
 220
 221                                         APPSBLENV@1180000 {
 222                                                 label = "APPSBLENV";
 223                                                 reg = <0x1180000 0x0080000>;
 224                                                 read-only;
 225                                         };
 226
 227                                         art: art@1200000 {
 228                                                 label = "art";
 229                                                 reg = <0x1200000 0x0140000>;
 230                                                 read-only;
 231                                         };
 232
 233                                         artbak: art@1340000 {
 234                                                 label = "artbak";
 235                                                 reg = <0x1340000 0x0140000>;
 236                                                 read-only;
 237                                         };
 238
 239                                         kernel@1480000 {
 240                                                 label = "kernel";
 241                                                 reg = <0x1480000 0x0400000>;
 242                                         };
 243
 244                                         ubi@1880000 {
 245                                                 label = "ubi";
 246                                                 reg = <0x1880000 0x1C00000>;
 247                                         };
 248
 249                                         netgear@3480000 {
 250                                                 label = "netgear";
 251                                                 reg = <0x3480000 0x4480000>;
 252                                                 read-only;
 253                                         };
 254
 255                                         reserve@7900000 {
 256                                                 label = "reserve";
 257                                                 reg = <0x7900000 0x0700000>;
 258                                                 read-only;
 259                                         };
 260                                 };
 261                         };
 262                 };
 263
 264                 mdio0: mdio {
 265                         compatible = "virtual,mdio-gpio";
 266                         #address-cells = <1>;
 267                         #size-cells = <0>;
 268                         gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
 269                                 <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 270                         pinctrl-0 = <&mdio0_pins>;
 271                         pinctrl-names = "default";
 272
 273                         phy0: ethernet-phy@0 {
 274                                 reg = <0>;
 275                                 qca,ar8327-initvals = <
 276                                         0x00004 0x7600000   /* PAD0_MODE */
 277                                         0x00008 0x1000000   /* PAD5_MODE */
 278                                         0x0000c 0x80        /* PAD6_MODE */
 279                                         0x000e4 0x6a545     /* MAC_POWER_SEL */
 280                                         0x000e0 0xc74164de  /* SGMII_CTRL */
 281                                         0x0007c 0x4e        /* PORT0_STATUS */
 282                                         0x00094 0x4e        /* PORT6_STATUS */
 283                                         >;
 284                         };
 285
 286                         phy4: ethernet-phy@4 {
 287                                 reg = <4>;
 288                         };
 289                 };
 290
 291                 gmac1: ethernet@37200000 {
 292                         status = "okay";
 293                         phy-mode = "rgmii";
 294                         phy-handle = <&phy4>;
 295                         qcom,id = <1>;
 296
 297                         pinctrl-0 = <&rgmii2_pins>;
 298                         pinctrl-names = "default";
 299
 300                         mtd-mac-address = <&art 6>;
 301                 };
 302
 303                 gmac2: ethernet@37400000 {
 304                         status = "okay";
 305                         phy-mode = "sgmii";
 306                         qcom,id = <2>;
 307
 308                         mtd-mac-address = <&art 0>;
 309
 310                         fixed-link {
 311                                 speed = <1000>;
 312                                 full-duplex;
 313                         };
 314                 };
 315         };
 316
 317         keys {
 318                 compatible = "gpio-keys";
 319                 pinctrl-0 = <&button_pins>;
 320                 pinctrl-names = "default";
 321
 322                 wifi {
 323                         label = "wifi";
 324                         gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
 325                         linux,code = <KEY_RFKILL>;
 326                 };
 327
 328                 reset {
 329                         label = "reset";
 330                         gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
 331                         linux,code = <KEY_RESTART>;
 332                 };
 333
 334                 wps {
 335                         label = "wps";
 336                         gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 337                         linux,code = <KEY_WPS_BUTTON>;
 338                 };
 339         };
 340
 341         leds {
 342                 compatible = "gpio-leds";
 343                 pinctrl-0 = <&led_pins>;
 344                 pinctrl-names = "default";
 345
 346                 usb1 {
 347                         label = "d7800:white:usb1";
 348                         gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 349                 };
 350
 351                 usb2 {
 352                         label = "d7800:white:usb2";
 353                         gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 354                 };
 355
 356                 power_amber: power_amber {
 357                         label = "d7800:amber:power";
 358                         gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 359                 };
 360
 361                 wan_white {
 362                         label = "d7800:white:wan";
 363                         gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
 364                 };
 365
 366                 wan_amber {
 367                         label = "d7800:amber:wan";
 368                         gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
 369                 };
 370
 371                 wps {
 372                         label = "d7800:white:wps";
 373                         gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
 374                 };
 375
 376                 esata {
 377                         label = "d7800:white:esata";
 378                         gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
 379                 };
 380
 381                 power_white: power_white {
 382                         label = "d7800:white:power";
 383                         gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
 384                         default-state = "keep";
 385                 };
 386
 387                 wifi {
 388                         label = "d7800:white:wifi";
 389                         gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
 390                 };
 391         };
 392 };
 393
 394 &adm_dma {
 395         status = "okay";
 396 };