target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq8062.dtsi"
   4 #include <dt-bindings/input/input.h>
   5
   6 /delete-node/ &nand_pins;
   7
   8 / {
   9         model = "NEC Platforms Aterm WG2600HP3";
  10         compatible = "nec,wg2600hp3", "qcom,ipq8062", "qcom,ipq8064";
  11
  12         memory {
  13                 device_type = "memory";
  14                 reg =  <0x42000000 0x1e000000>;
  15         };
  16
  17         aliases {
  18                 label-mac-device = &gmac2;
  19
  20                 led-boot = &led_power_green;
  21                 led-failsafe = &led_power_red;
  22                 led-running = &led_power_green;
  23                 led-upgrade = &led_power_red;
  24         };
  25
  26         keys {
  27                 compatible = "gpio-keys";
  28
  29                 pinctrl-0 = <&buttons_pins>;
  30                 pinctrl-names = "default";
  31
  32                 reset {
  33                         label = "reset";
  34                         gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_RESTART>;
  36                         debounce-interval = <60>;
  37                         wakeup-source;
  38                 };
  39
  40                 wps {
  41                         label = "wps";
  42                         gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
  43                         linux,code = <KEY_WPS_BUTTON>;
  44                         debounce-interval = <60>;
  45                         wakeup-source;
  46                 };
  47
  48                 mode0 {
  49                         label = "mode0";
  50                         gpios = <&qcom_pinmux 40 GPIO_ACTIVE_LOW>;
  51                         linux,code = <BTN_0>;
  52                         linux,input-type = <EV_SW>;
  53                         debounce-interval = <60>;
  54                         wakeup-source;
  55                 };
  56
  57                 mode1 {
  58                         label = "mode1";
  59                         gpios = <&qcom_pinmux 41 GPIO_ACTIVE_LOW>;
  60                         linux,code = <BTN_1>;
  61                         linux,input-type = <EV_SW>;
  62                         debounce-interval = <60>;
  63                         wakeup-source;
  64                 };
  65         };
  66
  67         leds {
  68                 compatible = "gpio-leds";
  69
  70                 pinctrl-0 = <&leds_pins>;
  71                 pinctrl-names = "default";
  72
  73                 led_power_green: power_green {
  74                         label = "green:power";
  75                         gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
  76                 };
  77
  78                 led_power_red: power_red {
  79                         label = "red:power";
  80                         gpios = <&qcom_pinmux 35 GPIO_ACTIVE_HIGH>;
  81                 };
  82
  83                 active_green {
  84                         label = "green:active";
  85                         gpios = <&qcom_pinmux 42 GPIO_ACTIVE_HIGH>;
  86                 };
  87
  88                 active_red {
  89                         label = "red:active";
  90                         gpios = <&qcom_pinmux 38 GPIO_ACTIVE_HIGH>;
  91                 };
  92
  93                 wlan2g_green {
  94                         label = "green:wlan2g";
  95                         gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
  96                         linux,default-trigger = "phy1tpt";
  97                 };
  98
  99                 wlan2g_red {
 100                         label = "red:wlan2g";
 101                         gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
 102                 };
 103
 104                 wlan5g_green {
 105                         label = "green:wlan5g";
 106                         gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
 107                         linux,default-trigger = "phy0tpt";
 108                 };
 109
 110                 wlan5g_red {
 111                         label = "red:wlan5g";
 112                         gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
 113                 };
 114
 115                 tv_green {
 116                         label = "green:tv";
 117                         gpios = <&qcom_pinmux 46 GPIO_ACTIVE_HIGH>;
 118                 };
 119
 120                 tv_red {
 121                         label = "red:tv";
 122                         gpios = <&qcom_pinmux 36 GPIO_ACTIVE_HIGH>;
 123                 };
 124
 125                 converter_green {
 126                         label = "green:converter";
 127                         gpios = <&qcom_pinmux 43 GPIO_ACTIVE_HIGH>;
 128                 };
 129
 130                 converter_red {
 131                         label = "red:converter";
 132                         gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
 133                 };
 134         };
 135 };
 136
 137 &qcom_pinmux {
 138         pinctrl-0 = <&akro_pins>;
 139         pinctrl-names = "default";
 140
 141         spi_pins: spi_pins {
 142                 mux {
 143                         pins = "gpio18", "gpio19", "gpio21";
 144                         function = "gsbi5";
 145                         bias-pull-down;
 146                 };
 147
 148                 data {
 149                         pins = "gpio18", "gpio19";
 150                         drive-strength = <10>;
 151                 };
 152
 153                 cs {
 154                         pins = "gpio20";
 155                         drive-strength = <10>;
 156                 };
 157
 158                 clk {
 159                         pins = "gpio21";
 160                         drive-strength = <12>;
 161                 };
 162         };
 163
 164         buttons_pins: buttons_pins {
 165                 mux {
 166                         pins = "gpio22", "gpio24", "gpio40",
 167                                 "gpio41";
 168                         function = "gpio";
 169                         drive-strength = <2>;
 170                         bias-pull-up;
 171                 };
 172         };
 173
 174         leds_pins: leds_pins {
 175                 mux {
 176                         pins = "gpio14", "gpio15", "gpio35",
 177                                 "gpio36", "gpio38", "gpio42",
 178                                 "gpio43", "gpio46", "gpio55",
 179                                 "gpio56", "gpio57", "gpio58";
 180                         function = "gpio";
 181                         bias-pull-down;
 182                 };
 183
 184                 akro2 {
 185                         pins = "gpio15", "gpio35", "gpio38",
 186                                 "gpio42", "gpio43", "gpio46",
 187                                 "gpio55", "gpio56", "gpio57",
 188                                 "gpio58";
 189                         drive-strength = <2>;
 190                 };
 191
 192                 akro4 {
 193                         pins = "gpio14", "gpio36";
 194                         drive-strength = <4>;
 195                 };
 196         };
 197
 198         /*
 199          * Stock firmware has the following settings, so let's do the same.
 200          * I don't sure why these are required.
 201          */
 202         akro_pins: akro_pinmux {
 203                 akro {
 204                         pins = "gpio17", "gpio26", "gpio47";
 205                         function = "gpio";
 206                         drive-strength = <2>;
 207                         bias-pull-down;
 208                 };
 209
 210                 reset {
 211                         pins = "gpio45";
 212                         function = "gpio";
 213                         drive-strength = <2>;
 214                         bias-disable;
 215                         output-low;
 216                 };
 217
 218                 gmac0_rgmii {
 219                         pins = "gpio25";
 220                         function = "gpio";
 221                         drive-strength = <8>;
 222                         bias-disable;
 223                 };
 224         };
 225 };
 226
 227 &gsbi5 {
 228         status = "okay";
 229         qcom,mode = <GSBI_PROT_SPI>;
 230
 231         spi@1a280000 {
 232                 status = "okay";
 233
 234                 pinctrl-0 = <&spi_pins>;
 235                 pinctrl-names = "default";
 236
 237                 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
 238
 239                 flash@0 {
 240                         compatible = "jedec,spi-nor";
 241                         reg = <0>;
 242                         spi-max-frequency = <50000000>;
 243                         m25p,fast-read;
 244
 245                         partitions {
 246                                 compatible = "fixed-partitions";
 247                                 #address-cells = <1>;
 248                                 #size-cells = <1>;
 249
 250                                 partition@0 {
 251                                         label = "SBL1";
 252                                         reg = <0x0000000 0x0020000>;
 253                                         read-only;
 254                                 };
 255
 256                                 partition@20000 {
 257                                         label = "MIBIB";
 258                                         reg = <0x0020000 0x0020000>;
 259                                         read-only;
 260                                 };
 261
 262                                 partition@40000 {
 263                                         label = "SBL2";
 264                                         reg = <0x0040000 0x0040000>;
 265                                         read-only;
 266                                 };
 267
 268                                 partition@80000 {
 269                                         label = "SBL3";
 270                                         reg = <0x0080000 0x0080000>;
 271                                         read-only;
 272                                 };
 273
 274                                 partition@100000 {
 275                                         label = "DDRCONFIG";
 276                                         reg = <0x0100000 0x0010000>;
 277                                         read-only;
 278                                 };
 279
 280                                 partition@110000 {
 281                                         label = "SSD";
 282                                         reg = <0x0110000 0x0010000>;
 283                                         read-only;
 284                                 };
 285
 286                                 partition@120000 {
 287                                         label = "TZ";
 288                                         reg = <0x0120000 0x0080000>;
 289                                         read-only;
 290                                 };
 291
 292                                 partition@1a0000 {
 293                                         label = "RPM";
 294                                         reg = <0x01a0000 0x0080000>;
 295                                         read-only;
 296                                 };
 297
 298                                 partition@220000 {
 299                                         label = "APPSBL";
 300                                         reg = <0x0220000 0x0080000>;
 301                                         read-only;
 302                                 };
 303
 304                                 partition@2a0000 {
 305                                         label = "APPSBLENV";
 306                                         reg = <0x02a0000 0x0010000>;
 307                                         read-only;
 308                                 };
 309
 310                                 factory: partition@2b0000 {
 311                                         label = "PRODUCTDATA";
 312                                         reg = <0x02b0000 0x0030000>;
 313                                         read-only;
 314                                 };
 315
 316                                 partition@2e0000 {
 317                                         label = "ART";
 318                                         reg = <0x02e0000 0x0040000>;
 319                                         read-only;
 320                                 };
 321
 322                                 partition@320000 {
 323                                         label = "TP";
 324                                         reg = <0x0320000 0x0040000>;
 325                                         read-only;
 326                                 };
 327
 328                                 partition@360000 {
 329                                         label = "TINY";
 330                                         reg = <0x0360000 0x0500000>;
 331                                         read-only;
 332                                 };
 333
 334                                 partition@860000 {
 335                                         compatible = "denx,uimage";
 336                                         label = "firmware";
 337                                         reg = <0x0860000 0x17a0000>;
 338                                 };
 339                         };
 340                 };
 341         };
 342 };
 343
 344 &adm_dma {
 345         status = "okay";
 346 };
 347
 348 &pcie0 {
 349         status = "okay";
 350
 351         bridge@0,0 {
 352                 reg = <0x00000000 0 0 0 0>;
 353                 #address-cells = <3>;
 354                 #size-cells = <2>;
 355                 ranges;
 356
 357                 wifi@1,0 {
 358                         compatible = "qcom,ath10k";
 359                         reg = <0x00010000 0 0 0 0>;
 360
 361                         qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
 362                 };
 363         };
 364 };
 365
 366 &pcie1 {
 367         status = "okay";
 368         force_gen1 = <1>;
 369
 370         bridge@0,0 {
 371                 reg = <0x00000000 0 0 0 0>;
 372                 #address-cells = <3>;
 373                 #size-cells = <2>;
 374                 ranges;
 375
 376                 wifi@1,0 {
 377                         compatible = "qcom,ath10k";
 378                         reg = <0x00010000 0 0 0 0>;
 379
 380                         ieee80211-freq-limit = <2400000 2483000>;
 381                         qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
 382                 };
 383         };
 384 };
 385
 386 &mdio0 {
 387         status = "okay";
 388
 389         pinctrl-0 = <&mdio0_pins>;
 390         pinctrl-names = "default";
 391
 392         phy0: ethernet-phy@0 {
 393                 reg = <0>;
 394                 qca,ar8327-initvals = <
 395                         0x04 0x80080080  /* PAD0_MODE */
 396                         0x0c 0x06000000  /* PAD6_MODE */
 397                         0x10 0x002613a0  /* PWS_REG */
 398                         0x50 0xcc36cc36  /* LED_CTRL0 */
 399                         0x54 0xca36ca36  /* LED_CTRL1 */
 400                         0x58 0xc936c936  /* LED_CTRL2 */
 401                         0x5c 0x03ffff00  /* LED_CTRL3 */
 402                         0x7c 0x0000004e  /* PORT0_STATUS */
 403                         0x94 0x0000004e  /* PORT6_STATUS */
 404                         0xe0 0xc74164de  /* SGMII_CTRL */
 405                         0xe4 0x0006a545  /* MAC_PWR_SEL */
 406                         >;
 407         };
 408 };
 409
 410 &gmac1 {
 411         status = "okay";
 412
 413         pinctrl-0 = <&rgmii2_pins>;
 414         pinctrl-names = "default";
 415
 416         phy-mode = "rgmii";
 417         qcom,id = <1>;
 418         mdiobus = <&mdio0>;
 419         mtd-mac-address = <&factory 0x0>;
 420
 421         fixed-link {
 422                 speed = <1000>;
 423                 full-duplex;
 424         };
 425 };
 426
 427 &gmac2 {
 428         status = "okay";
 429         phy-mode = "sgmii";
 430         qcom,id = <2>;
 431         mdiobus = <&mdio0>;
 432         mtd-mac-address = <&factory 0x6>;
 433
 434         fixed-link {
 435                 speed = <1000>;
 436                 full-duplex;
 437         };
 438 };