target/linux/ipq806x/image/Makefile

   1 # Copyright (c) 2014 The Linux Foundation. All rights reserved.
   2 #
   3 include $(TOPDIR)/rules.mk
   4 include $(INCLUDE_DIR)/image.mk
   5
   6 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
   7 DEVICE_VARS += TPLINK_BOARD_ID
   8
   9 define Build/buffalo-rootfs-cksum
  10         ( \
  11                 echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \
  12                         $(STAGING_DIR_HOST)/bin/awk '{s+=$$0}END{printf "%x", 255-s%256}')"; \
  13         ) >> $@
  14 endef
  15
  16 define Build/edimax-header
  17         $(eval edimax_model=$(word 1,$(1)))
  18
  19         $(STAGING_DIR_HOST)/bin/mkedimaximg \
  20         -b -s CSYS -m $(edimax_model) \
  21         -f 0x70000 -S 0x1200000 \
  22         -i $@ -o $@.new
  23         @mv $@.new $@
  24 endef
  25
  26 define Device/Default
  27         PROFILES := Default
  28         KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
  29         KERNEL_LOADADDR = 0x42208000
  30         DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
  31         DEVICE_DTS_CONFIG := config@1
  32         IMAGES := sysupgrade.bin
  33         IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
  34         IMAGE/sysupgrade.bin/squashfs :=
  35 endef
  36
  37 define Device/LegacyImage
  38         KERNEL_SUFFIX := -uImage
  39         KERNEL = kernel-bin | append-dtb | uImage none
  40         KERNEL_NAME := zImage
  41 endef
  42
  43 define Device/FitImage
  44         KERNEL_SUFFIX := -fit-uImage.itb
  45         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  46         KERNEL_NAME := Image
  47 endef
  48
  49 define Device/FitImageLzma
  50         KERNEL_SUFFIX := -fit-uImage.itb
  51         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  52         KERNEL_NAME := Image
  53 endef
  54
  55 define Device/UbiFit
  56         KERNEL_IN_UBI := 1
  57         IMAGES := nand-factory.bin nand-sysupgrade.bin
  58         IMAGE/nand-factory.bin := append-ubi
  59         IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
  60 endef
  61
  62 define Device/DniImage
  63         KERNEL_SUFFIX := -uImage
  64         KERNEL = kernel-bin | append-dtb | uImage none
  65         KERNEL_NAME := zImage
  66         NETGEAR_BOARD_ID :=
  67         NETGEAR_HW_ID :=
  68         UBINIZE_OPTS := -E 5
  69         IMAGES += factory.img
  70         IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
  71         IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | append-metadata
  72 endef
  73
  74 define Device/TpSafeImage
  75         KERNEL_SUFFIX := -uImage
  76         KERNEL = kernel-bin | append-dtb | uImage none
  77         KERNEL_NAME := zImage
  78         TPLINK_BOARD_ID :=
  79         IMAGES += factory.bin
  80         IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
  81         IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
  82 endef
  83
  84 define Device/ZyXELImage
  85         KERNEL_SUFFIX := -uImage
  86         KERNEL = kernel-bin | append-dtb | uImage none | pad-to $$(KERNEL_SIZE)
  87         KERNEL_NAME := zImage
  88         IMAGES += factory.bin
  89         IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel
  90         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
  91 endef
  92
  93 define Device/askey_rt4230w-rev6
  94         $(call Device/LegacyImage)
  95         DEVICE_VENDOR := Askey
  96         DEVICE_MODEL := RT4230W
  97         DEVICE_VARIANT := REV6
  98         SOC := qcom-ipq8065
  99         BLOCKSIZE := 128k
 100         PAGESIZE := 2048
 101         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
 102         KERNEL_IN_UBI := 1
 103 endef
 104 TARGET_DEVICES += askey_rt4230w-rev6
 105
 106 define Device/asrock_g10
 107         $(call Device/FitImage)
 108         $(call Device/UbiFit)
 109         SOC := qcom-ipq8064
 110         DEVICE_VENDOR := ASRock
 111         DEVICE_MODEL := G10
 112         BLOCKSIZE := 128k
 113         PAGESIZE := 2048
 114         KERNEL_SIZE := 5332k
 115         DEVICE_PACKAGES := kmod-i2c-gpio ath10k-firmware-qca99x0-ct
 116         IMAGE/nand-factory.bin := append-ubi | edimax-header RN67
 117 endef
 118 TARGET_DEVICES += asrock_g10
 119
 120 define Device/buffalo_wxr-2533dhp
 121         $(call Device/LegacyImage)
 122         SOC := qcom-ipq8064
 123         DEVICE_VENDOR := Buffalo
 124         DEVICE_MODEL := WXR-2533DHP
 125         BLOCKSIZE := 128k
 126         PAGESIZE := 2048
 127         IMAGE_SIZE := 65536k
 128         KERNEL_IN_UBI := 1
 129         IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \
 130                 sysupgrade-tar rootfs=$$$$@ | append-metadata
 131         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
 132 endef
 133 TARGET_DEVICES += buffalo_wxr-2533dhp
 134
 135 define Device/compex_wpq864
 136         $(call Device/FitImage)
 137         $(call Device/UbiFit)
 138         DEVICE_VENDOR := Compex
 139         DEVICE_MODEL := WPQ864
 140         BLOCKSIZE := 128k
 141         PAGESIZE := 2048
 142         SOC := qcom-ipq8064
 143         DEVICE_PACKAGES := kmod-gpio-beeper
 144 endef
 145 TARGET_DEVICES += compex_wpq864
 146
 147 define Device/edgecore_ecw5410
 148         $(call Device/FitImage)
 149         $(call Device/UbiFit)
 150         DEVICE_VENDOR := Edgecore
 151         DEVICE_MODEL := ECW5410
 152         SOC := qcom-ipq8068
 153         BLOCKSIZE := 128k
 154         PAGESIZE := 2048
 155         DEVICE_DTS_CONFIG := config@v2.0-ap160
 156         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-edgecore_ecw5410
 157 endef
 158 TARGET_DEVICES += edgecore_ecw5410
 159
 160 define Device/linksys_ea7500-v1
 161         $(call Device/LegacyImage)
 162         DEVICE_VENDOR := Linksys
 163         DEVICE_MODEL := EA7500
 164         DEVICE_VARIANT := v1
 165         SOC := qcom-ipq8064
 166         PAGESIZE := 2048
 167         BLOCKSIZE := 128k
 168         KERNEL_SIZE := 3072k
 169         KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakehdr filesystem
 170         UBINIZE_OPTS := -E 5
 171         IMAGES := factory.bin sysupgrade.bin
 172         IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
 173         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
 174 endef
 175 TARGET_DEVICES += linksys_ea7500-v1
 176
 177 define Device/linksys_ea8500
 178         $(call Device/LegacyImage)
 179         DEVICE_VENDOR := Linksys
 180         DEVICE_MODEL := EA8500
 181         SOC := qcom-ipq8064
 182         PAGESIZE := 2048
 183         BLOCKSIZE := 128k
 184         KERNEL_SIZE := 3072k
 185         KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakehdr filesystem
 186         BOARD_NAME := ea8500
 187         SUPPORTED_DEVICES += ea8500
 188         UBINIZE_OPTS := -E 5
 189         IMAGES += factory.bin
 190         IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
 191         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
 192 endef
 193 TARGET_DEVICES += linksys_ea8500
 194
 195 define Device/nec_wg2600hp
 196         $(call Device/LegacyImage)
 197         DEVICE_VENDOR := NEC
 198         DEVICE_MODEL := Aterm WG2600HP
 199         SOC := qcom-ipq8064
 200         BLOCKSIZE := 64k
 201         BOARD_NAME := wg2600hp
 202         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 203         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
 204 endef
 205 TARGET_DEVICES += nec_wg2600hp
 206
 207 define Device/nec_wg2600hp3
 208         $(call Device/LegacyImage)
 209         DEVICE_VENDOR := NEC Platforms
 210         DEVICE_MODEL := Aterm WG2600HP3
 211         SOC := qcom-ipq8062
 212         BLOCKSIZE := 64k
 213         IMAGES := sysupgrade.bin
 214         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 215         DEVICE_PACKAGES := -kmod-ata-ahci -kmod-ata-ahci-platform -kmod-usb-ohci -kmod-usb2 \
 216                 -kmod-usb-ledtrig-usbport -kmod-usb-phy-qcom-dwc3 -kmod-usb3 -kmod-usb-dwc3-qcom \
 217                 ath10k-firmware-qca9984-ct ipq-wifi-nec_wg2600hp3
 218 endef
 219 TARGET_DEVICES += nec_wg2600hp3
 220
 221 define Device/netgear_d7800
 222         $(call Device/DniImage)
 223         DEVICE_VENDOR := NETGEAR
 224         DEVICE_MODEL := Nighthawk X4 D7800
 225         SOC := qcom-ipq8064
 226         KERNEL_SIZE := 4096k
 227         NETGEAR_BOARD_ID := D7800
 228         NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
 229         BLOCKSIZE := 128k
 230         PAGESIZE := 2048
 231         BOARD_NAME := d7800
 232         SUPPORTED_DEVICES += d7800
 233         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
 234 endef
 235 TARGET_DEVICES += netgear_d7800
 236
 237 define Device/netgear_r7500
 238         $(call Device/DniImage)
 239         DEVICE_VENDOR := NETGEAR
 240         DEVICE_MODEL := Nighthawk X4 R7500
 241         DEVICE_VARIANT := v1
 242         SOC := qcom-ipq8064
 243         KERNEL_SIZE := 4096k
 244         NETGEAR_BOARD_ID := R7500
 245         NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
 246         BLOCKSIZE := 128k
 247         PAGESIZE := 2048
 248         BOARD_NAME := r7500
 249         SUPPORTED_DEVICES += r7500
 250         DEVICE_PACKAGES := ath10k-firmware-qca988x-ct
 251 endef
 252 TARGET_DEVICES += netgear_r7500
 253
 254 define Device/netgear_r7500v2
 255         $(call Device/DniImage)
 256         DEVICE_VENDOR := NETGEAR
 257         DEVICE_MODEL := Nighthawk X4 R7500
 258         DEVICE_VARIANT := v2
 259         SOC := qcom-ipq8064
 260         KERNEL_SIZE := 4096k
 261         NETGEAR_BOARD_ID := R7500v2
 262         NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
 263         BLOCKSIZE := 128k
 264         PAGESIZE := 2048
 265         BOARD_NAME := r7500v2
 266         SUPPORTED_DEVICES += r7500v2
 267         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct ath10k-firmware-qca988x-ct
 268 endef
 269 TARGET_DEVICES += netgear_r7500v2
 270
 271 define Device/netgear_r7800
 272         $(call Device/DniImage)
 273         DEVICE_VENDOR := NETGEAR
 274         DEVICE_MODEL := Nighthawk X4S R7800
 275         SOC := qcom-ipq8065
 276         KERNEL_SIZE := 4096k
 277         NETGEAR_BOARD_ID := R7800
 278         NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
 279         BLOCKSIZE := 128k
 280         PAGESIZE := 2048
 281         BOARD_NAME := r7800
 282         SUPPORTED_DEVICES += r7800
 283         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
 284 endef
 285 TARGET_DEVICES += netgear_r7800
 286
 287 define Device/netgear_xr500
 288         $(call Device/DniImage)
 289         DEVICE_VENDOR := NETGEAR
 290         DEVICE_MODEL := Nighthawk XR500
 291         SOC := qcom-ipq8065
 292         KERNEL_SIZE := 4096k
 293         NETGEAR_BOARD_ID := XR500
 294         NETGEAR_HW_ID := 29764958+0+256+512+4x4+4x4+cascade
 295         BLOCKSIZE := 128k
 296         PAGESIZE := 2048
 297         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
 298 endef
 299 TARGET_DEVICES += netgear_xr500
 300
 301 define Device/qcom_ipq8064-ap148
 302         $(call Device/FitImage)
 303         $(call Device/UbiFit)
 304         DEVICE_VENDOR := Qualcomm
 305         DEVICE_MODEL := AP148
 306         DEVICE_VARIANT := standard
 307         SOC := qcom-ipq8064
 308         DEVICE_DTS := qcom-ipq8064-ap148
 309         KERNEL_INSTALL := 1
 310         BLOCKSIZE := 128k
 311         PAGESIZE := 2048
 312         BOARD_NAME := ap148
 313         SUPPORTED_DEVICES += ap148
 314         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
 315 endef
 316 TARGET_DEVICES += qcom_ipq8064-ap148
 317
 318 define Device/qcom_ipq8064-ap148-legacy
 319         $(call Device/LegacyImage)
 320         $(call Device/UbiFit)
 321         DEVICE_VENDOR := Qualcomm
 322         DEVICE_MODEL := AP148
 323         DEVICE_VARIANT := legacy
 324         SOC := qcom-ipq8064
 325         DEVICE_DTS := qcom-ipq8064-ap148
 326         BLOCKSIZE := 128k
 327         PAGESIZE := 2048
 328         BOARD_NAME := ap148
 329         SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
 330         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
 331 endef
 332 TARGET_DEVICES += qcom_ipq8064-ap148-legacy
 333
 334 define Device/qcom_ipq8064-ap161
 335         $(call Device/FitImage)
 336         $(call Device/UbiFit)
 337         DEVICE_VENDOR := Qualcomm
 338         DEVICE_MODEL := AP161
 339         SOC := qcom-ipq8064
 340         DEVICE_DTS := qcom-ipq8064-ap161
 341         KERNEL_INSTALL := 1
 342         BLOCKSIZE := 128k
 343         PAGESIZE := 2048
 344         BOARD_NAME := ap161
 345         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
 346 endef
 347 TARGET_DEVICES += qcom_ipq8064-ap161
 348
 349 define Device/qcom_ipq8064-db149
 350         $(call Device/FitImage)
 351         DEVICE_VENDOR := Qualcomm
 352         DEVICE_MODEL := DB149
 353         SOC := qcom-ipq8064
 354         DEVICE_DTS := qcom-ipq8064-db149
 355         KERNEL_INSTALL := 1
 356         BOARD_NAME := db149
 357         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
 358 endef
 359 TARGET_DEVICES += qcom_ipq8064-db149
 360
 361 define Device/tplink_ad7200
 362         $(call Device/TpSafeImage)
 363         DEVICE_VENDOR := TP-Link
 364         DEVICE_MODEL := AD7200
 365         DEVICE_VARIANT := v1/v2
 366         DEVICE_ALT0_VENDOR := TP-Link
 367         DEVICE_ALT0_MODEL := Talon AD7200
 368         DEVICE_ALT0_VARIANT := v1/v2
 369         SOC := qcom-ipq8064
 370         BLOCKSIZE := 128k
 371         PAGESIZE := 2048
 372         TPLINK_BOARD_ID := AD7200
 373         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-wil6210
 374 endef
 375 TARGET_DEVICES += tplink_ad7200
 376
 377 define Device/tplink_c2600
 378         $(call Device/TpSafeImage)
 379         DEVICE_VENDOR := TP-Link
 380         DEVICE_MODEL := Archer C2600
 381         DEVICE_VARIANT := v1
 382         SOC := qcom-ipq8064
 383         BLOCKSIZE := 128k
 384         PAGESIZE := 2048
 385         BOARD_NAME := c2600
 386         SUPPORTED_DEVICES += c2600
 387         TPLINK_BOARD_ID := C2600
 388         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
 389 endef
 390 TARGET_DEVICES += tplink_c2600
 391
 392 define Device/tplink_vr2600v
 393         DEVICE_VENDOR := TP-Link
 394         DEVICE_MODEL := Archer VR2600v
 395         DEVICE_VARIANT := v1
 396         KERNEL_SUFFIX := -uImage
 397         KERNEL = kernel-bin | append-dtb | uImage none
 398         KERNEL_NAME := zImage
 399         KERNEL_SIZE := 3072k
 400         SOC := qcom-ipq8064
 401         BLOCKSIZE := 128k
 402         PAGESIZE := 2048
 403         BOARD_NAME := vr2600v
 404         SUPPORTED_DEVICES += vr2600v
 405         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
 406         IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
 407 endef
 408 TARGET_DEVICES += tplink_vr2600v
 409
 410 define Device/ubnt_unifi-ac-hd
 411         $(call Device/FitImageLzma)
 412         DEVICE_VENDOR := Ubiquiti
 413         DEVICE_MODEL := UniFi AC HD
 414         SOC := qcom-ipq8064
 415         BLOCKSIZE := 64k
 416         IMAGE_SIZE := 14784k
 417         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
 418         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 419 endef
 420 TARGET_DEVICES += ubnt_unifi-ac-hd
 421
 422 define Device/zyxel_nbg6817
 423         DEVICE_VENDOR := ZyXEL
 424         DEVICE_MODEL := NBG6817
 425         SOC := qcom-ipq8065
 426         KERNEL_SIZE := 4096k
 427         BLOCKSIZE := 64k
 428         BOARD_NAME := nbg6817
 429         RAS_BOARD := NBG6817
 430         RAS_ROOTFS_SIZE := 20934k
 431         RAS_VERSION := "V1.99(OWRT.9999)C0"
 432         SUPPORTED_DEVICES += nbg6817
 433         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
 434         $(call Device/ZyXELImage)
 435 endef
 436 TARGET_DEVICES += zyxel_nbg6817
 437
 438 $(eval $(call BuildImage))