target/linux/kirkwood/image/Makefile

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 #
   3 # Copyright (C) 2009-2013 OpenWrt.org
   4
   5 include $(TOPDIR)/rules.mk
   6 include $(INCLUDE_DIR)/image.mk
   7
   8 KERNEL_LOADADDR:=0x8000
   9
  10 # Some info about Ctera firmware:
  11 # 1. It's simple tar file (GNU standard), but it must have ".firm" suffix.
  12 # 2. It contains two images: kernel and romdisk. Both are required.
  13 # 3. Every image has header and trailer file.
  14 # 4. The struct of tar firmware is: header kernel trailer header romdisk trailer
  15 # 5. In header file are some strings used to describe image. It was decoded from
  16 #    factory image.
  17 # 6. Version format in header file is restricted by Original FW.
  18 # 7. Trailer file contains MD5 sum string of header and image file.
  19 # 8. Firmware file must have <=24MB size.
  20
  21 define Build/ctera-firmware
  22         mkdir -p $@.tmp
  23
  24         # Prepare header and trailer file for kernel
  25         echo "# CTera firmware information file" > $@.tmp/header
  26         echo "image_type=kernel" >> $@.tmp/header
  27         echo "arch=Kirkwood" >> $@.tmp/header
  28         echo "board=Any" >> $@.tmp/header
  29         echo "version=3.1.22.30669" >> $@.tmp/header
  30         echo "kernel_cmd=console=ttyS0,115200 earlyprintk" >> $@.tmp/header
  31         echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
  32                 >> $@.tmp/header
  33
  34         cp $@ $@.tmp/kernel
  35
  36         echo "MD5=$$(cat $@.tmp/header $@.tmp/kernel | $(MKHASH) md5)" \
  37                 > $@.tmp/trailer
  38
  39         tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
  40                 -H gnu -C $@.tmp -cf $@.tar header kernel trailer
  41
  42         # Prepare header and trailer file for fake romdisk
  43         echo "# CTera firmware information file" > $@.tmp/header
  44         echo "image_type=romdisk" >> $@.tmp/header
  45         echo "initrd=yes" >> $@.tmp/header
  46         echo "arch=Kirkwood" >> $@.tmp/header
  47         echo "board=Any" >> $@.tmp/header
  48         echo "version=3.1.22.30669" >> $@.tmp/header
  49         echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
  50                 >> $@.tmp/header
  51
  52         rm -f $@
  53         touch $@
  54         $(call Build/append-uImage-fakehdr, ramdisk)
  55         cp $@ $@.tmp/romdisk
  56
  57         echo "MD5=$$(cat $@.tmp/header $@.tmp/romdisk | $(MKHASH) md5)" \
  58                 > $@.tmp/trailer
  59
  60         tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
  61                 -H gnu -C $@.tmp -rf $@.tar header romdisk trailer
  62
  63         mv $@.tar $@
  64         rm -rf $@.tmp
  65 endef
  66
  67 define Device/kernel-size-migration
  68   DEVICE_COMPAT_VERSION := 2.0
  69   DEVICE_COMPAT_MESSAGE := Partition design has changed compared to \
  70         older versions (up to 21.02) due to kernel size restrictions. \
  71         Upgrade via sysupgrade mechanism is not possible, so new \
  72         installation via factory style image is required.
  73 endef
  74
  75 define Device/Default
  76   PROFILES := Default
  77   DEVICE_DTS = kirkwood-$(lastword $(subst _, ,$(1)))
  78   KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
  79   KERNEL := kernel-bin | append-dtb | uImage none
  80   KERNEL_NAME := zImage
  81   KERNEL_SUFFIX  := -uImage
  82   KERNEL_IN_UBI := 1
  83
  84   PAGESIZE := 2048
  85   SUBPAGESIZE := 512
  86   BLOCKSIZE := 128k
  87   IMAGES := sysupgrade.bin factory.bin
  88   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
  89   IMAGE/factory.bin := append-ubi
  90 endef
  91
  92 define Device/checkpoint_l-50
  93   DEVICE_VENDOR := Check Point
  94   DEVICE_MODEL := L-50
  95   DEVICE_PACKAGES := kmod-ath9k kmod-gpio-button-hotplug kmod-mvsdio \
  96         kmod-rtc-s35390a kmod-usb-ledtrig-usbport wpad-basic-wolfssl
  97   IMAGES := sysupgrade.bin
  98 endef
  99 TARGET_DEVICES += checkpoint_l-50
 100
 101 define Device/cisco_on100
 102   DEVICE_VENDOR := Cisco Systems
 103   DEVICE_MODEL := ON100
 104   KERNEL_SIZE := 5376k
 105   KERNEL_IN_UBI :=
 106   UBINIZE_OPTS := -E 5
 107   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
 108   DEVICE_PACKAGES := kmod-mvsdio
 109   SUPPORTED_DEVICES += on100
 110 endef
 111 TARGET_DEVICES += cisco_on100
 112
 113 define Device/cloudengines_pogoe02
 114   DEVICE_VENDOR := Cloud Engines
 115   DEVICE_MODEL := Pogoplug E02
 116   DEVICE_DTS := kirkwood-pogo_e02
 117   SUPPORTED_DEVICES += pogo_e02
 118 endef
 119 TARGET_DEVICES += cloudengines_pogoe02
 120
 121 define Device/cloudengines_pogoplugv4
 122   DEVICE_VENDOR := Cloud Engines
 123   DEVICE_MODEL := Pogoplug V4
 124   DEVICE_DTS := kirkwood-pogoplug-series-4
 125   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-mvsdio kmod-usb3 \
 126         kmod-gpio-button-hotplug
 127 endef
 128 TARGET_DEVICES += cloudengines_pogoplugv4
 129
 130 define Device/ctera_c200-v1
 131   DEVICE_VENDOR := Ctera
 132   DEVICE_MODEL := C200
 133   DEVICE_VARIANT := V1
 134   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-gpio-button-hotplug \
 135         kmod-hwmon-lm63 kmod-rtc-s35390a kmod-usb-ledtrig-usbport
 136   KERNEL := kernel-bin | append-dtb | uImage none | ctera-firmware
 137   KERNEL_IN_UBI :=
 138   KERNEL_SUFFIX := -factory.firm
 139   IMAGES := sysupgrade.bin
 140 endef
 141 TARGET_DEVICES += ctera_c200-v1
 142
 143 define Device/endian_4i-edge-200
 144   DEVICE_VENDOR := Endian
 145   DEVICE_MODEL := 4i Edge 200
 146   DEVICE_ALT0_VENDOR := Endian
 147   DEVICE_ALT0_MODEL := UTM Mini Firewall
 148   DEVICE_PACKAGES := kmod-ath9k kmod-mvsdio wpad-basic-wolfssl
 149   KERNEL_SIZE := 4096k
 150   IMAGES := sysupgrade.bin
 151 endef
 152 TARGET_DEVICES += endian_4i-edge-200
 153
 154 define Device/globalscale_sheevaplug
 155   DEVICE_VENDOR := Globalscale
 156   DEVICE_MODEL := Sheevaplug
 157   DEVICE_PACKAGES := kmod-mvsdio
 158 endef
 159 TARGET_DEVICES += globalscale_sheevaplug
 160
 161 define Device/iom_iconnect-1.1
 162   DEVICE_VENDOR := Iomega
 163   DEVICE_MODEL := Iconnect
 164   DEVICE_DTS := kirkwood-iconnect
 165   SUPPORTED_DEVICES += iconnect
 166 endef
 167 TARGET_DEVICES += iom_iconnect-1.1
 168
 169 define Device/iom_ix2-200
 170   DEVICE_VENDOR := Iomega
 171   DEVICE_MODEL := StorCenter ix2-200
 172   DEVICE_DTS := kirkwood-iomega_ix2_200
 173   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
 174         kmod-gpio-button-hotplug kmod-hwmon-lm63
 175   PAGESIZE := 512
 176   SUBPAGESIZE := 256
 177   BLOCKSIZE := 16k
 178   KERNEL_SIZE := 3072k
 179   KERNEL_IN_UBI :=
 180   UBINIZE_OPTS := -E 5
 181   IMAGE_SIZE := 31744k
 182   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
 183         check-size
 184 endef
 185 TARGET_DEVICES += iom_ix2-200
 186
 187 define Device/linksys
 188   DEVICE_VENDOR := Linksys
 189   DEVICE_PACKAGES := kmod-mwl8k wpad-basic-wolfssl kmod-gpio-button-hotplug
 190   KERNEL_IN_UBI :=
 191   UBINIZE_OPTS := -E 5
 192   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
 193 endef
 194
 195 define Device/linksys_e4200-v2
 196   $(Device/linksys)
 197   $(Device/kernel-size-migration)
 198   DEVICE_MODEL := E4200
 199   DEVICE_VARIANT := v2
 200   KERNEL_SIZE := 3072k
 201   SUPPORTED_DEVICES += linksys,viper linksys-viper
 202 endef
 203 TARGET_DEVICES += linksys_e4200-v2
 204
 205 define Device/linksys_ea3500
 206   $(Device/linksys)
 207   $(Device/kernel-size-migration)
 208   DEVICE_MODEL := EA3500
 209   PAGESIZE := 512
 210   SUBPAGESIZE := 256
 211   BLOCKSIZE := 16k
 212   KERNEL_SIZE := 3072k
 213   SUPPORTED_DEVICES += linksys,audi linksys-audi
 214 endef
 215 TARGET_DEVICES += linksys_ea3500
 216
 217 define Device/linksys_ea4500
 218   $(Device/linksys)
 219   $(Device/kernel-size-migration)
 220   DEVICE_MODEL := EA4500
 221   KERNEL_SIZE := 3072k
 222   SUPPORTED_DEVICES += linksys,viper linksys-viper
 223 endef
 224 TARGET_DEVICES += linksys_ea4500
 225
 226 define Device/netgear_readynas-duo-v2
 227   DEVICE_VENDOR := NETGEAR
 228   DEVICE_MODEL := ReadyNAS Duo
 229   DEVICE_VARIANT := v2
 230   DEVICE_DTS := kirkwood-netgear_readynas_duo_v2
 231   KERNEL_IN_UBI :=
 232   IMAGES := sysupgrade.bin
 233   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
 234         kmod-gpio-button-hotplug kmod-hwmon-g762 kmod-rtc-rs5c372a kmod-usb3
 235 endef
 236 TARGET_DEVICES += netgear_readynas-duo-v2
 237
 238 define Device/raidsonic_ib-nas62x0
 239   DEVICE_VENDOR := RaidSonic
 240   DEVICE_MODEL := ICY BOX IB-NAS62x0
 241   DEVICE_DTS := kirkwood-ib62x0
 242   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
 243   SUPPORTED_DEVICES += ib62x0
 244 endef
 245 TARGET_DEVICES += raidsonic_ib-nas62x0
 246
 247 define Device/seagate_blackarmor-nas220
 248   DEVICE_VENDOR := Seagate
 249   DEVICE_MODEL := Blackarmor NAS220
 250   DEVICE_PACKAGES := kmod-hwmon-adt7475 kmod-fs-ext4 kmod-ata-marvell-sata \
 251         mdadm kmod-gpio-button-hotplug
 252   PAGESIZE := 512
 253   SUBPAGESIZE := 256
 254   BLOCKSIZE := 16k
 255   UBINIZE_OPTS := -e 1
 256 endef
 257 TARGET_DEVICES += seagate_blackarmor-nas220
 258
 259 define Device/seagate_dockstar
 260   DEVICE_VENDOR := Seagate
 261   DEVICE_MODEL := FreeAgent Dockstar
 262   SUPPORTED_DEVICES += dockstar
 263 endef
 264 TARGET_DEVICES += seagate_dockstar
 265
 266 define Device/seagate_goflexnet
 267   DEVICE_VENDOR := Seagate
 268   DEVICE_MODEL := GoFlexNet
 269   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
 270   SUPPORTED_DEVICES += goflexnet
 271 endef
 272 TARGET_DEVICES += seagate_goflexnet
 273
 274 define Device/seagate_goflexhome
 275   DEVICE_VENDOR := Seagate
 276   DEVICE_MODEL := GoFlexHome
 277   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
 278   SUPPORTED_DEVICES += goflexhome
 279 endef
 280 TARGET_DEVICES += seagate_goflexhome
 281
 282 define Device/zyxel_nsa310b
 283   DEVICE_VENDOR := ZyXEL
 284   DEVICE_MODEL := NSA310b
 285   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-r8169 kmod-fs-ext4 \
 286         kmod-gpio-button-hotplug kmod-hwmon-lm85
 287   SUPPORTED_DEVICES += nsa310b
 288 endef
 289 TARGET_DEVICES += zyxel_nsa310b
 290
 291 define Device/zyxel_nsa310s
 292   DEVICE_VENDOR := ZyXEL
 293   DEVICE_MODEL := NSA310S
 294   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug
 295 endef
 296 TARGET_DEVICES += zyxel_nsa310s
 297
 298 define Device/zyxel_nsa325
 299   DEVICE_VENDOR := ZyXEL
 300   DEVICE_MODEL := NSA325
 301   DEVICE_VARIANT := v1/v2
 302   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
 303         kmod-gpio-button-hotplug kmod-rtc-pcf8563 kmod-usb3
 304   SUPPORTED_DEVICES += nsa325
 305 endef
 306 TARGET_DEVICES += zyxel_nsa325
 307
 308 $(eval $(call BuildImage))