target/linux/kirkwood/image/Makefile

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 #
   3 # Copyright (C) 2009-2013 OpenWrt.org
   4
   5 include $(TOPDIR)/rules.mk
   6 include $(INCLUDE_DIR)/image.mk
   7
   8 KERNEL_LOADADDR:=0x8000
   9
  10 # Some info about Ctera firmware:
  11 # 1. It's simple tar file (GNU standard), but it must have ".firm" suffix.
  12 # 2. It contains two images: kernel and romdisk. Both are required.
  13 # 3. Every image has header and trailer file.
  14 # 4. The struct of tar firmware is: header kernel trailer header romdisk trailer
  15 # 5. In header file are some strings used to describe image. It was decoded from
  16 #    factory image.
  17 # 6. Version format in header file is restricted by Original FW.
  18 # 7. Trailer file contains MD5 sum string of header and image file.
  19 # 8. Firmware file must have <=24MB size.
  20
  21 define Build/ctera-firmware
  22         mkdir -p $@.tmp
  23
  24         # Prepare header and trailer file for kernel
  25         echo "# CTera firmware information file" > $@.tmp/header
  26         echo "image_type=kernel" >> $@.tmp/header
  27         echo "arch=Kirkwood" >> $@.tmp/header
  28         echo "board=Any" >> $@.tmp/header
  29         echo "version=3.1.22.30669" >> $@.tmp/header
  30         echo "kernel_cmd=console=ttyS0,115200 earlyprintk" >> $@.tmp/header
  31         echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
  32                 >> $@.tmp/header
  33
  34         cp $@ $@.tmp/kernel
  35
  36         echo "MD5=$$(cat $@.tmp/header $@.tmp/kernel | $(MKHASH) md5)" \
  37                 > $@.tmp/trailer
  38
  39         tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
  40                 -H gnu -C $@.tmp -cf $@.tar header kernel trailer
  41
  42         # Prepare header and trailer file for fake romdisk
  43         echo "# CTera firmware information file" > $@.tmp/header
  44         echo "image_type=romdisk" >> $@.tmp/header
  45         echo "initrd=yes" >> $@.tmp/header
  46         echo "arch=Kirkwood" >> $@.tmp/header
  47         echo "board=Any" >> $@.tmp/header
  48         echo "version=3.1.22.30669" >> $@.tmp/header
  49         echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
  50                 >> $@.tmp/header
  51
  52         rm -f $@
  53         touch $@
  54         $(call Build/append-uImage-fakehdr, ramdisk)
  55         cp $@ $@.tmp/romdisk
  56
  57         echo "MD5=$$(cat $@.tmp/header $@.tmp/romdisk | $(MKHASH) md5)" \
  58                 > $@.tmp/trailer
  59
  60         tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
  61                 -H gnu -C $@.tmp -rf $@.tar header romdisk trailer
  62
  63         mv $@.tar $@
  64         rm -rf $@.tmp
  65 endef
  66
  67 define Device/kernel-size-migration
  68   DEVICE_COMPAT_VERSION := 2.0
  69   DEVICE_COMPAT_MESSAGE := Partition design has changed compared to \
  70         older versions (up to 21.02) due to kernel size restrictions. \
  71         Upgrade via sysupgrade mechanism is not possible, so new \
  72         installation via factory style image is required.
  73 endef
  74
  75 define Device/Default
  76   PROFILES := Default
  77   DEVICE_DTS = kirkwood-$(lastword $(subst _, ,$(1)))
  78   KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
  79   KERNEL := kernel-bin | append-dtb | uImage none
  80   KERNEL_NAME := zImage
  81   KERNEL_SUFFIX  := -uImage
  82   KERNEL_IN_UBI := 1
  83
  84   PAGESIZE := 2048
  85   SUBPAGESIZE := 512
  86   BLOCKSIZE := 128k
  87   IMAGES := sysupgrade.bin factory.bin
  88   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
  89   IMAGE/factory.bin := append-ubi
  90 endef
  91
  92 define Device/checkpoint_l-50
  93   DEVICE_VENDOR := Check Point
  94   DEVICE_MODEL := L-50
  95   DEVICE_PACKAGES := kmod-ath9k kmod-gpio-button-hotplug kmod-mvsdio \
  96         kmod-rtc-s35390a kmod-usb-ledtrig-usbport wpad-basic-wolfssl
  97   IMAGES := sysupgrade.bin
  98 endef
  99 TARGET_DEVICES += checkpoint_l-50
 100
 101 define Device/cisco_on100
 102   DEVICE_VENDOR := Cisco Systems
 103   DEVICE_MODEL := ON100
 104   KERNEL_SIZE := 5376k
 105   KERNEL_IN_UBI :=
 106   UBINIZE_OPTS := -E 5
 107   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
 108   DEVICE_PACKAGES := kmod-mvsdio
 109   SUPPORTED_DEVICES += on100
 110 endef
 111 TARGET_DEVICES += cisco_on100
 112
 113 define Device/cloudengines_pogoe02
 114   DEVICE_VENDOR := Cloud Engines
 115   DEVICE_MODEL := Pogoplug E02
 116   DEVICE_DTS := kirkwood-pogo_e02
 117   SUPPORTED_DEVICES += pogo_e02
 118 endef
 119 TARGET_DEVICES += cloudengines_pogoe02
 120
 121 define Device/cloudengines_pogoplugv4
 122   DEVICE_VENDOR := Cloud Engines
 123   DEVICE_MODEL := Pogoplug V4
 124   DEVICE_DTS := kirkwood-pogoplug-series-4
 125   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-mvsdio kmod-usb3 \
 126         kmod-gpio-button-hotplug
 127 endef
 128 TARGET_DEVICES += cloudengines_pogoplugv4
 129
 130 define Device/ctera_c200-v1
 131   DEVICE_VENDOR := Ctera
 132   DEVICE_MODEL := C200
 133   DEVICE_VARIANT := V1
 134   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-gpio-button-hotplug \
 135         kmod-hwmon-lm63 kmod-rtc-s35390a kmod-usb-ledtrig-usbport
 136   KERNEL := kernel-bin | append-dtb | uImage none | ctera-firmware
 137   KERNEL_IN_UBI :=
 138   KERNEL_SUFFIX := -factory.firm
 139   IMAGES := sysupgrade.bin
 140 endef
 141 TARGET_DEVICES += ctera_c200-v1
 142
 143 define Device/globalscale_sheevaplug
 144   DEVICE_VENDOR := Globalscale
 145   DEVICE_MODEL := Sheevaplug
 146   DEVICE_PACKAGES := kmod-mvsdio
 147 endef
 148 TARGET_DEVICES += globalscale_sheevaplug
 149
 150 define Device/iom_iconnect-1.1
 151   DEVICE_VENDOR := Iomega
 152   DEVICE_MODEL := Iconnect
 153   DEVICE_DTS := kirkwood-iconnect
 154   SUPPORTED_DEVICES += iconnect
 155 endef
 156 TARGET_DEVICES += iom_iconnect-1.1
 157
 158 define Device/iom_ix2-200
 159   DEVICE_VENDOR := Iomega
 160   DEVICE_MODEL := StorCenter ix2-200
 161   DEVICE_DTS := kirkwood-iomega_ix2_200
 162   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
 163         kmod-gpio-button-hotplug kmod-hwmon-lm63
 164   PAGESIZE := 512
 165   SUBPAGESIZE := 256
 166   BLOCKSIZE := 16k
 167   KERNEL_SIZE := 3072k
 168   KERNEL_IN_UBI :=
 169   UBINIZE_OPTS := -E 5
 170   IMAGE_SIZE := 31744k
 171   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
 172         check-size
 173 endef
 174 TARGET_DEVICES += iom_ix2-200
 175
 176 define Device/linksys
 177   DEVICE_VENDOR := Linksys
 178   DEVICE_PACKAGES := kmod-mwl8k wpad-basic-wolfssl kmod-gpio-button-hotplug
 179   KERNEL_IN_UBI :=
 180   UBINIZE_OPTS := -E 5
 181   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
 182 endef
 183
 184 define Device/linksys_e4200-v2
 185   $(Device/linksys)
 186   $(Device/kernel-size-migration)
 187   DEVICE_MODEL := E4200
 188   DEVICE_VARIANT := v2
 189   KERNEL_SIZE := 3072k
 190   SUPPORTED_DEVICES += linksys,viper linksys-viper
 191 endef
 192 TARGET_DEVICES += linksys_e4200-v2
 193
 194 define Device/linksys_ea3500
 195   $(Device/linksys)
 196   $(Device/kernel-size-migration)
 197   DEVICE_MODEL := EA3500
 198   PAGESIZE := 512
 199   SUBPAGESIZE := 256
 200   BLOCKSIZE := 16k
 201   KERNEL_SIZE := 3072k
 202   SUPPORTED_DEVICES += linksys,audi linksys-audi
 203 endef
 204 TARGET_DEVICES += linksys_ea3500
 205
 206 define Device/linksys_ea4500
 207   $(Device/linksys)
 208   $(Device/kernel-size-migration)
 209   DEVICE_MODEL := EA4500
 210   KERNEL_SIZE := 3072k
 211   SUPPORTED_DEVICES += linksys,viper linksys-viper
 212 endef
 213 TARGET_DEVICES += linksys_ea4500
 214
 215 define Device/raidsonic_ib-nas62x0
 216   DEVICE_VENDOR := RaidSonic
 217   DEVICE_MODEL := ICY BOX IB-NAS62x0
 218   DEVICE_DTS := kirkwood-ib62x0
 219   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
 220   SUPPORTED_DEVICES += ib62x0
 221 endef
 222 TARGET_DEVICES += raidsonic_ib-nas62x0
 223
 224 define Device/seagate_blackarmor-nas220
 225   DEVICE_VENDOR := Seagate
 226   DEVICE_MODEL := Blackarmor NAS220
 227   DEVICE_PACKAGES := kmod-hwmon-adt7475 kmod-fs-ext4 kmod-ata-marvell-sata \
 228         mdadm kmod-gpio-button-hotplug
 229   PAGESIZE := 512
 230   SUBPAGESIZE := 256
 231   BLOCKSIZE := 16k
 232   UBINIZE_OPTS := -e 1
 233 endef
 234 TARGET_DEVICES += seagate_blackarmor-nas220
 235
 236 define Device/seagate_dockstar
 237   DEVICE_VENDOR := Seagate
 238   DEVICE_MODEL := FreeAgent Dockstar
 239   SUPPORTED_DEVICES += dockstar
 240 endef
 241 TARGET_DEVICES += seagate_dockstar
 242
 243 define Device/seagate_goflexnet
 244   DEVICE_VENDOR := Seagate
 245   DEVICE_MODEL := GoFlexNet
 246   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
 247   SUPPORTED_DEVICES += goflexnet
 248 endef
 249 TARGET_DEVICES += seagate_goflexnet
 250
 251 define Device/seagate_goflexhome
 252   DEVICE_VENDOR := Seagate
 253   DEVICE_MODEL := GoFlexHome
 254   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
 255   SUPPORTED_DEVICES += goflexhome
 256 endef
 257 TARGET_DEVICES += seagate_goflexhome
 258
 259 define Device/zyxel_nsa310b
 260   DEVICE_VENDOR := ZyXEL
 261   DEVICE_MODEL := NSA310b
 262   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-r8169 kmod-fs-ext4 \
 263         kmod-gpio-button-hotplug kmod-hwmon-lm85
 264   SUPPORTED_DEVICES += nsa310b
 265 endef
 266 TARGET_DEVICES += zyxel_nsa310b
 267
 268 define Device/zyxel_nsa310s
 269   DEVICE_VENDOR := ZyXEL
 270   DEVICE_MODEL := NSA310S
 271   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug
 272 endef
 273 TARGET_DEVICES += zyxel_nsa310s
 274
 275 define Device/zyxel_nsa325
 276   DEVICE_VENDOR := ZyXEL
 277   DEVICE_MODEL := NSA325
 278   DEVICE_VARIANT := v1/v2
 279   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
 280         kmod-gpio-button-hotplug kmod-rtc-pcf8563 kmod-usb3
 281   SUPPORTED_DEVICES += nsa325
 282 endef
 283 TARGET_DEVICES += zyxel_nsa325
 284
 285 $(eval $(call BuildImage))