target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch

   1 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
   2 +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
   3 @@ -8,6 +8,13 @@
   4         model = "Iomega StorCenter ix2-200";
   5         compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   6
   7 +       aliases {
   8 +               led-boot = &led_power;
   9 +               led-failsafe = &led_health;
  10 +               led-running = &led_power;
  11 +               led-upgrade = &led_health;
  12 +       };
  13 +
  14         memory {
  15                 device_type = "memory";
  16                 reg = <0x00000000 0x10000000>;
  17 @@ -127,16 +134,15 @@
  18                               &pmx_led_rebuild &pmx_led_health >;
  19                 pinctrl-names = "default";
  20
  21 -               power_led {
  22 +               led_power: power_led {
  23                         label = "status:white:power_led";
  24                         gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
  25 -                       default-state = "keep";
  26                 };
  27                 rebuild_led {
  28                         label = "status:white:rebuild_led";
  29                         gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
  30                 };
  31 -               health_led {
  32 +               led_health: health_led {
  33                         label = "status:red:health_led";
  34                         gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
  35                 };
  36 @@ -186,18 +192,18 @@
  37         };
  38
  39         partition@a0000 {
  40 -               label = "env";
  41 +               label = "u-boot environment";
  42                 reg = <0xa0000 0x20000>;
  43                 read-only;
  44         };
  45
  46         partition@100000 {
  47 -               label = "uImage";
  48 +               label = "kernel";
  49                 reg = <0x100000 0x300000>;
  50         };
  51
  52         partition@400000 {
  53 -               label = "rootfs";
  54 +               label = "ubi";
  55                 reg = <0x400000 0x1C00000>;
  56         };
  57  };
  58 @@ -211,7 +217,7 @@
  59  };
  60
  61  &eth0 {
  62 -       status = "okay";
  63 +       status = "disabled";
  64         ethernet0-port@0 {
  65                 speed = <1000>;
  66                 duplex = <1>;