target/linux/lantiq/dts/VGV7519.dtsi

   1 #include "vr9.dtsi"
   2
   3 / {
   4
   5         model = "VGV7519 - KPN Experiabox V8";
   6
   7         chosen {
   8                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   9         };
  10
  11         aliases {
  12                 led-boot = &power_green;
  13                 led-failsafe = &power_red;
  14                 led-running = &power_green;
  15
  16                 led-dsl = &broadband_green;
  17                 led-internet = &internet_green;
  18                 led-wifi = &wireless_green;
  19         };
  20
  21         memory@0 {
  22                 reg = <0x0 0x4000000>;
  23         };
  24
  25         fpi@10000000 {
  26                 localbus@0 {
  27                         nor-boot@0 {
  28                                 compatible = "lantiq,nor";
  29                                 bank-width = <2>;
  30                                 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
  31                                 #address-cells = <1>;
  32                                 #size-cells = <1>;
  33
  34                                 partitions {
  35                                         compatible = "fixed-partitions";
  36                                         #address-cells = <1>;
  37                                         #size-cells = <1>;
  38
  39                                         boardconfig: partition@40000 {
  40                                                 label = "board_config";
  41                                                 reg = <0x40000 0x10000>;
  42                                                 read-only;
  43                                         };
  44                                 };
  45                         };
  46                 };
  47
  48                 gpio: pinmux@E100B10 {
  49                         pinctrl-names = "default";
  50                         pinctrl-0 = <&state_default>;
  51
  52                         state_default: pinmux {
  53                                 stp {
  54                                         lantiq,groups = "stp";
  55                                         lantiq,function = "stp";
  56                                         lantiq,open-drain = <0>;
  57                                         lantiq,output = <1>;
  58                                         lantiq,pull = <0>;
  59                                 };
  60                                 mdio {
  61                                         lantiq,groups = "mdio";
  62                                         lantiq,function = "mdio";
  63                                 };
  64                                 pci-rst {
  65                                         lantiq,pins = "io21";
  66                                         lantiq,open-drain = <0>;
  67                                         lantiq,pull = <0>;
  68                                         lantiq,output = <1>;
  69                                 };
  70                                 gphy-leds {
  71                                         lantiq,groups = "gphy0 led1", "gphy1 led0";
  72                                         lantiq,function = "gphy";
  73                                         lantiq,open-drain = <0>;
  74                                         lantiq,pull = <0>;
  75                                         lantiq,output = <1>;
  76                                 };
  77                         };
  78                 };
  79
  80                 stp: stp@E100BB0 {
  81                         compatible = "lantiq,gpio-stp-xway";
  82                         reg = <0xE100BB0 0x40>;
  83                         #gpio-cells = <2>;
  84                         gpio-controller;
  85
  86                         lantiq,shadow = <0xffff>;
  87                         lantiq,groups = <0x3>;
  88                         lantiq,dsl = <0x0>;
  89                         lantiq,phy1 = <0x0>;
  90                         lantiq,phy2 = <0x0>;
  91                         /* lantiq,rising; */
  92                 };
  93
  94                 ifxhcd@E101000 {
  95                         status = "okay";
  96                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
  97                         lantiq,portmask = <0x3>;
  98                 };
  99
 100                 ifxhcd@E106000 {
 101                         status = "okay";
 102                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
 103                 };
 104
 105                 pcie@d900000 {
 106                         status = "disabled";
 107                 };
 108         };
 109
 110         gphy-xrx200 {
 111                 compatible = "lantiq,phy-xrx200";
 112                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 113                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 114                 phys = [ 00 01 ];
 115         };
 116
 117         gpio-keys-polled {
 118                 compatible = "gpio-keys-polled";
 119                 #address-cells = <1>;
 120                 #size-cells = <0>;
 121                 poll-interval = <100>;
 122                 reset {
 123                         label = "reset";
 124                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 125                         linux,code = <KEY_RESTART>;
 126                 };
 127                 eco {
 128                         label = "eco";
 129                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
 130                         linux,code = <KEY_RFKILL>;
 131                 };
 132                 rfkill {
 133                         label = "rfkill";
 134                         gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
 135                         linux,code = <KEY_RFKILL>;
 136                 };
 137                 wps {
 138                         label = "wps";
 139                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 140                         linux,code = <KEY_WPS_BUTTON>;
 141                 };
 142         };
 143
 144         gpio-leds {
 145                 compatible = "gpio-leds";
 146
 147                 eco {
 148                         label = "vgv7519:blue:eco";
 149                         gpios = <&stp 2 GPIO_ACTIVE_LOW>;
 150                 };
 151                 wps_red {
 152                         label = "vgv7519:red:wps";
 153                         gpios = <&stp 3 GPIO_ACTIVE_LOW>;
 154                 };
 155                 wps_green {
 156                         label = "vgv7519:green:wps";
 157                         gpios = <&stp 4 GPIO_ACTIVE_LOW>;
 158                 };
 159                 upgrade {
 160                         label = "vgv7519:blue:upgrade";
 161                         gpios = <&stp 5 GPIO_ACTIVE_LOW>;
 162                 };
 163                 tv {
 164                         label = "vgv7519:green:tv";
 165                         gpios = <&stp 6 GPIO_ACTIVE_LOW>;
 166                 };
 167                 internet_green: internet_green {
 168                         label = "vgv7519:green:internet";
 169                         gpios = <&stp 7 GPIO_ACTIVE_LOW>;
 170                 };
 171                 internet_red {
 172                         label = "vgv7519:red:internet";
 173                         gpios = <&stp 8 GPIO_ACTIVE_LOW>;
 174                 };
 175                 broadband_red {
 176                         label = "vgv7519:red:broadband";
 177                         gpios = <&stp 9 GPIO_ACTIVE_LOW>;
 178                 };
 179                 broadband_green: broadband_green {
 180                         label = "vgv7519:green:broadband";
 181                         gpios = <&stp 10 GPIO_ACTIVE_LOW>;
 182                 };
 183                 voice {
 184                         label = "vgv7519:green:voice";
 185                         gpios = <&stp 11 GPIO_ACTIVE_LOW>;
 186                 };
 187                 wireless_red {
 188                         label = "vgv7519:red:wireless";
 189                         gpios = <&stp 12 GPIO_ACTIVE_LOW>;
 190                 };
 191                 wireless_green: wireless_green {
 192                         label = "vgv7519:green:wireless";
 193                         gpios = <&stp 13 GPIO_ACTIVE_LOW>;
 194                 };
 195                 power_green: power2 {
 196                         label = "vgv7519:green:power";
 197                         gpios = <&stp 14 GPIO_ACTIVE_LOW>;
 198                         default-state = "keep";
 199                 };
 200                 power_red: power {
 201                         label = "vgv7519:red:power";
 202                         gpios = <&stp 15 GPIO_ACTIVE_LOW>;
 203                 };
 204         };
 205 };
 206
 207 &pci0 {
 208         status = "okay";
 209         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 210
 211         wifi@1814,3091 {
 212                 compatible = "pci1814,3091";
 213                 reg = <0x7000 0 0 0 0>;
 214                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 215                 ralink,mtd-eeprom-swap;
 216                 mtd-mac-address = <&boardconfig 0x16>;
 217                 mtd-mac-address-increment = <1>;
 218         };
 219 };
 220
 221 &eth0 {
 222         lan: interface@0 {
 223                 compatible = "lantiq,xrx200-pdi";
 224                 #address-cells = <1>;
 225                 #size-cells = <0>;
 226                 reg = <0>;
 227                 mtd-mac-address = <&boardconfig 0x16>;
 228                 mtd-mac-address-increment = <1>;
 229                 lantiq,switch;
 230
 231                 ethernet@0 {
 232                         compatible = "lantiq,xrx200-pdi-port";
 233                         reg = <0>;
 234                         phy-mode = "rgmii";
 235                         phy-handle = <&phy0>;
 236                 };
 237                 ethernet@1 {
 238                         compatible = "lantiq,xrx200-pdi-port";
 239                         reg = <1>;
 240                         phy-mode = "rgmii";
 241                         phy-handle = <&phy1>;
 242                 };
 243                 ethernet@2 {
 244                         compatible = "lantiq,xrx200-pdi-port";
 245                         reg = <2>;
 246                         phy-mode = "gmii";
 247                         phy-handle = <&phy11>;
 248                 };
 249                 ethernet@4 {
 250                         compatible = "lantiq,xrx200-pdi-port";
 251                         reg = <4>;
 252                         phy-mode = "gmii";
 253                         phy-handle = <&phy13>;
 254                 };
 255         };
 256
 257         wan: interface@1 {
 258                 compatible = "lantiq,xrx200-pdi";
 259                 #address-cells = <1>;
 260                 #size-cells = <0>;
 261                 reg = <1>;
 262                 mtd-mac-address = <&boardconfig 0x16>;
 263                 lantiq,wan;
 264
 265                 ethernet@5 {
 266                         compatible = "lantiq,xrx200-pdi-port";
 267                         reg = <5>;
 268                         phy-mode = "rgmii";
 269                         phy-handle = <&phy5>;
 270                 };
 271         };
 272
 273         mdio@0 {
 274                 #address-cells = <1>;
 275                 #size-cells = <0>;
 276                 compatible = "lantiq,xrx200-mdio";
 277                 phy0: ethernet-phy@0 {
 278                         reg = <0x0>;
 279                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 280                 };
 281                 phy1: ethernet-phy@1 {
 282                         reg = <0x1>;
 283                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 284                 };
 285                 phy5: ethernet-phy@5 {
 286                         reg = <0x5>;
 287                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 288                 };
 289                 phy11: ethernet-phy@11 {
 290                         reg = <0x11>;
 291                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 292                 };
 293                 phy13: ethernet-phy@13 {
 294                         reg = <0x13>;
 295                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 296                 };
 297         };
 298 };