target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
   5
   6 / {
   7         compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
   8
   9         chosen {
  10                 bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
  11         };
  12
  13         aliases {
  14                 led-boot = &power_green;
  15                 led-failsafe = &power_red;
  16                 led-running = &power_green;
  17                 led-upgrade = &power_green;
  18
  19                 led-dsl = &broadband_green;
  20                 led-internet = &internet_green;
  21                 led-wifi = &wireless_green;
  22         };
  23
  24         memory@0 {
  25                 device_type = "memory";
  26                 reg = <0x0 0x4000000>;
  27         };
  28
  29         keys {
  30                 compatible = "gpio-keys-polled";
  31                 poll-interval = <100>;
  32                 reset {
  33                         label = "reset";
  34                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_RESTART>;
  36                 };
  37                 eco {
  38                         label = "eco";
  39                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
  40                         linux,code = <BTN_0>;
  41                 };
  42                 rfkill {
  43                         label = "rfkill";
  44                         gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
  45                         linux,code = <KEY_RFKILL>;
  46                 };
  47                 wps {
  48                         label = "wps";
  49                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
  50                         linux,code = <KEY_WPS_BUTTON>;
  51                 };
  52         };
  53
  54         leds {
  55                 compatible = "gpio-leds";
  56
  57                 eco {
  58                         label = "vgv7519:blue:eco";
  59                         gpios = <&stp 2 GPIO_ACTIVE_LOW>;
  60                 };
  61                 wps_red {
  62                         label = "vgv7519:red:wps";
  63                         gpios = <&stp 3 GPIO_ACTIVE_LOW>;
  64                 };
  65                 wps_green {
  66                         label = "vgv7519:green:wps";
  67                         gpios = <&stp 4 GPIO_ACTIVE_LOW>;
  68                 };
  69                 upgrade {
  70                         label = "vgv7519:blue:upgrade";
  71                         gpios = <&stp 5 GPIO_ACTIVE_LOW>;
  72                 };
  73                 tv {
  74                         label = "vgv7519:green:tv";
  75                         gpios = <&stp 6 GPIO_ACTIVE_LOW>;
  76                 };
  77                 internet_green: internet_green {
  78                         label = "vgv7519:green:internet";
  79                         gpios = <&stp 7 GPIO_ACTIVE_LOW>;
  80                 };
  81                 internet_red {
  82                         label = "vgv7519:red:internet";
  83                         gpios = <&stp 8 GPIO_ACTIVE_LOW>;
  84                 };
  85                 broadband_red {
  86                         label = "vgv7519:red:broadband";
  87                         gpios = <&stp 9 GPIO_ACTIVE_LOW>;
  88                 };
  89                 broadband_green: broadband_green {
  90                         label = "vgv7519:green:broadband";
  91                         gpios = <&stp 10 GPIO_ACTIVE_LOW>;
  92                 };
  93                 voice {
  94                         label = "vgv7519:green:voice";
  95                         gpios = <&stp 11 GPIO_ACTIVE_LOW>;
  96                 };
  97                 wireless_red {
  98                         label = "vgv7519:red:wireless";
  99                         gpios = <&stp 12 GPIO_ACTIVE_LOW>;
 100                 };
 101                 wireless_green: wireless_green {
 102                         label = "vgv7519:green:wireless";
 103                         gpios = <&stp 13 GPIO_ACTIVE_LOW>;
 104                 };
 105                 power_green: power2 {
 106                         label = "vgv7519:green:power";
 107                         gpios = <&stp 14 GPIO_ACTIVE_LOW>;
 108                         default-state = "keep";
 109                 };
 110                 power_red: power {
 111                         label = "vgv7519:red:power";
 112                         gpios = <&stp 15 GPIO_ACTIVE_LOW>;
 113                 };
 114         };
 115
 116         usb_vbus: regulator-usb-vbus {
 117                 compatible = "regulator-fixed";
 118
 119                 regulator-name = "USB_VBUS";
 120
 121                 regulator-min-microvolt = <5000000>;
 122                 regulator-max-microvolt = <5000000>;
 123
 124                 gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
 125                 enable-active-high;
 126         };
 127 };
 128
 129 &eth0 {
 130         pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led0_pins>;
 131         pinctrl-names = "default";
 132
 133         lan: interface@0 {
 134                 compatible = "lantiq,xrx200-pdi";
 135                 #address-cells = <1>;
 136                 #size-cells = <0>;
 137                 reg = <0>;
 138                 mtd-mac-address = <&boardconfig 0x16>;
 139                 mtd-mac-address-increment = <1>;
 140                 lantiq,switch;
 141
 142                 ethernet@0 {
 143                         compatible = "lantiq,xrx200-pdi-port";
 144                         reg = <0>;
 145                         phy-mode = "rgmii";
 146                         phy-handle = <&phy0>;
 147                 };
 148                 ethernet@1 {
 149                         compatible = "lantiq,xrx200-pdi-port";
 150                         reg = <1>;
 151                         phy-mode = "rgmii";
 152                         phy-handle = <&phy1>;
 153                 };
 154                 ethernet@2 {
 155                         compatible = "lantiq,xrx200-pdi-port";
 156                         reg = <2>;
 157                         phy-mode = "gmii";
 158                         phy-handle = <&phy11>;
 159                 };
 160                 ethernet@4 {
 161                         compatible = "lantiq,xrx200-pdi-port";
 162                         reg = <4>;
 163                         phy-mode = "gmii";
 164                         phy-handle = <&phy13>;
 165                 };
 166                 ethernet@5 {
 167                         compatible = "lantiq,xrx200-pdi-port";
 168                         reg = <5>;
 169                         phy-mode = "rgmii";
 170                         phy-handle = <&phy5>;
 171                 };
 172         };
 173
 174         mdio {
 175                 #address-cells = <1>;
 176                 #size-cells = <0>;
 177                 compatible = "lantiq,xrx200-mdio";
 178
 179                 phy0: ethernet-phy@0 {
 180                         reg = <0x0>;
 181                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 182                 };
 183                 phy1: ethernet-phy@1 {
 184                         reg = <0x1>;
 185                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 186                 };
 187                 phy5: ethernet-phy@5 {
 188                         reg = <0x5>;
 189                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 190                 };
 191                 phy11: ethernet-phy@11 {
 192                         reg = <0x11>;
 193                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 194                 };
 195                 phy13: ethernet-phy@13 {
 196                         reg = <0x13>;
 197                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 198                 };
 199         };
 200 };
 201
 202 &gphy0 {
 203         lantiq,gphy-mode = <GPHY_MODE_GE>;
 204 };
 205
 206 &gphy1 {
 207         lantiq,gphy-mode = <GPHY_MODE_GE>;
 208 };
 209
 210 &gpio {
 211         pinctrl-names = "default";
 212         pinctrl-0 = <&state_default>;
 213
 214         state_default: pinmux {
 215                 pci-rst {
 216                         lantiq,pins = "io21";
 217                         lantiq,open-drain = <0>;
 218                         lantiq,pull = <0>;
 219                         lantiq,output = <1>;
 220                 };
 221         };
 222 };
 223
 224 &localbus {
 225         flash@0 {
 226                 compatible = "lantiq,nor";
 227                 bank-width = <2>;
 228                 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
 229
 230                 partitions {
 231                         compatible = "fixed-partitions";
 232                         #address-cells = <1>;
 233                         #size-cells = <1>;
 234
 235                         boardconfig: partition@40000 {
 236                                 label = "board_config";
 237                                 reg = <0x40000 0x10000>;
 238                                 read-only;
 239                         };
 240                 };
 241         };
 242 };
 243
 244 &pci0 {
 245         status = "okay";
 246         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 247
 248         wifi@1814,3091 {
 249                 compatible = "pci1814,3091";
 250                 reg = <0x7000 0 0 0 0>;
 251                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 252                 ralink,mtd-eeprom-swap;
 253                 mtd-mac-address = <&boardconfig 0x16>;
 254                 mtd-mac-address-increment = <1>;
 255         };
 256 };
 257
 258 &pcie0 {
 259         status = "disabled";
 260 };
 261
 262 &stp {
 263         status = "okay";
 264         lantiq,shadow = <0xffff>;
 265         lantiq,groups = <0x3>;
 266         lantiq,dsl = <0x0>;
 267         lantiq,phy1 = <0x0>;
 268         lantiq,phy2 = <0x0>;
 269         /* lantiq,rising; */
 270 };
 271
 272 &usb_phy0 {
 273         status = "okay";
 274 };
 275
 276 &usb_phy1 {
 277         status = "okay";
 278 };
 279
 280 &usb0 {
 281         status = "okay";
 282         vbus-supply = <&usb_vbus>;
 283 };
 284
 285 &usb1 {
 286         status = "okay";
 287         vbus-supply = <&usb_vbus>;
 288 };
 289
 290 &vmmc {
 291         status = "okay";
 292         gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
 293                  &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
 294                  &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
 295 };