target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi

   1 #include "danube.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         chosen {
   7                 bootargs = "console=ttyLTQ0,115200";
   8         };
   9
  10         aliases {
  11                 led-boot = &power;
  12                 led-failsafe = &power;
  13                 led-running = &power;
  14                 led-upgrade = &power;
  15
  16                 led-dsl = &dsl;
  17                 led-internet = &online;
  18                 led-usb = &led_usb;
  19                 led-wifi = &wifi;
  20         };
  21
  22         memory@0 {
  23                 device_type = "memory";
  24                 reg = <0x0 0x4000000>;
  25         };
  26
  27         ath5k_eep {
  28                 compatible = "ath5k,eeprom";
  29                 ath,eep-flash = <&boardconfig 0x400>;
  30                 ath,mac-offset = <0x16>;
  31                 ath,mac-increment = <1>;
  32                 ath,eep-swap;
  33         };
  34
  35         keys {
  36                 compatible = "gpio-keys-polled";
  37                 poll-interval = <100>;
  38
  39                 rfkill {
  40                         label = "rfkill";
  41                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
  42                         linux,code = <KEY_RFKILL>;
  43                 };
  44                 reset {
  45                         label = "reset";
  46                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
  47                         linux,code = <KEY_RESTART>;
  48                 };
  49         };
  50
  51         leds {
  52                 compatible = "gpio-leds";
  53                 power: power {
  54                         label = "power";
  55                         gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
  56                         default-state = "keep";
  57                 };
  58                 dsl: dsl {
  59                         label = "dsl";
  60                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  61                 };
  62                 online: online {
  63                         label = "online";
  64                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  65                 };
  66                 wifi: wifi {
  67                         label = "wifi";
  68                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  69                 };
  70                 wps {
  71                         label = "wps";
  72                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  73                 };
  74                 dsl2 {
  75                         label = "dsl2";
  76                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  77                 };
  78                 led_usb: usb {
  79                         label = "usb";
  80                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  81                 };
  82                 voice {
  83                         label = "voice";
  84                         gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
  85                 };
  86                 fxs1 {
  87                         label = "fxs1";
  88                         gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
  89                 };
  90                 fxs2 {
  91                         label = "fxs2";
  92                         gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
  93                 };
  94                 fxo {
  95                         label = "fxo";
  96                         gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
  97                 };
  98         };
  99
 100         usb_vbus: regulator-usb-vbus {
 101                 compatible = "regulator-fixed";
 102
 103                 regulator-name = "USB_VBUS";
 104
 105                 regulator-min-microvolt = <5000000>;
 106                 regulator-max-microvolt = <5000000>;
 107
 108                 gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
 109                 enable-active-high;
 110         };
 111 };
 112
 113 &gpio {
 114         pinctrl-names = "default";
 115         pinctrl-0 = <&state_default>;
 116
 117         state_default: pinmux {
 118                 ebu {
 119                         lantiq,groups = "ebu cs1";
 120                         lantiq,function = "ebu";
 121                 };
 122         };
 123 };
 124
 125 &gsw {
 126         phy-mode = "mii";
 127         mtd-mac-address = <&boardconfig 0x16>;
 128 };
 129
 130 &localbus {
 131         flash@0 {
 132                 compatible = "lantiq,nor";
 133                 bank-width = <2>;
 134                 reg = <0 0x0 0x2000000>;
 135
 136                 partitions {
 137                         compatible = "fixed-partitions";
 138                         #address-cells = <1>;
 139                         #size-cells = <1>;
 140
 141                         partition@0 {
 142                                 label = "uboot";
 143                                 reg = <0x00000 0x10000>; /* 64 KB */
 144                                 read-only;
 145                         };
 146
 147                         partition@10000 {
 148                                 label = "u-boot-env";
 149                                 reg = <0x10000 0x10000>; /* 64 KB */
 150                                 read-only;
 151                         };
 152
 153                         partition@20000 {
 154                                 label = "firmware";
 155                                 reg = <0x20000 0x3d0000>;
 156                         };
 157
 158                         boardconfig: partition@3f0000 {
 159                                 label = "boardconfig";
 160                                 reg = <0x3f0000 0x10000>;
 161                                 read-only;
 162                         };
 163                 };
 164         };
 165
 166         gpiomm: gpio@1 {
 167                 compatible = "lantiq,gpio-mm";
 168                 reg = <1 0x0 0x10 >;
 169                 #address-cells = <1>;
 170                 #size-cells = <1>;
 171                 #gpio-cells = <2>;
 172                 gpio-controller;
 173                 lantiq,shadow = <0x0>;
 174         };
 175 };
 176
 177 &pci0 {
 178         status = "okay";
 179
 180         pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>,
 181                     <&pci_req1_pins>, <&pci_req2_pins>;
 182         pinctrl-names = "default";
 183
 184         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 185         req-mask = <0xf>;
 186 };
 187
 188 &usb_phy {
 189         status = "okay";
 190 };
 191
 192 &usb {
 193         status = "okay";
 194         vbus-supply = <&usb_vbus>;
 195 };
 196
 197 &vmmc {
 198         status = "okay";
 199         gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
 200 };