target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts

   1 #include "danube.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         compatible = "arcadyan,arv752dpw", "lantiq,xway", "lantiq,danube";
   7         model = "Arcor 802";
   8
   9         chosen {
  10                 bootargs = "console=ttyLTQ0,115200";
  11         };
  12
  13         aliases {
  14                 led-boot = &power_red;
  15                 led-failsafe = &power_blue;
  16                 led-running = &power_red;
  17                 led-upgrade = &power_red;
  18
  19                 led-dsl = &internet_red;
  20                 led-usb = &umts;
  21                 led-wifi = &wifi;
  22
  23                 label-mac-device = &wifi0;
  24         };
  25
  26         memory@0 {
  27                 device_type = "memory";
  28                 reg = <0x0 0x4000000>;
  29         };
  30
  31         keys {
  32                 compatible = "gpio-keys-polled";
  33                 poll-interval = <100>;
  34
  35                 wps {
  36                         label = "wps";
  37                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_WPS_BUTTON>;
  39                 };
  40                 restart {
  41                         label = "restart";
  42                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  43                         linux,code = <KEY_POWER>;
  44                 };
  45                 dsl {
  46                         label = "dsl";
  47                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  48                         linux,code = <BTN_0>;
  49                 };
  50                 reset {
  51                         label = "reset";
  52                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
  53                         linux,code = <KEY_RESTART>;
  54                 };
  55         };
  56
  57         leds {
  58                 compatible = "gpio-leds";
  59                 power_blue: power1 {
  60                         label = "blue:power";
  61                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  62                 };
  63                 internet_red: internet {
  64                         label = "red:internet";
  65                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  66                 };
  67                 message {
  68                         label = "red:message";
  69                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  70                 };
  71                 power_red: power {
  72                         label = "red:power";
  73                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  74                         default-state = "keep";
  75                 };
  76                 voice1 {
  77                         label = "red:voice";
  78                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  79                 };
  80                 umts: umts {
  81                         label = "red:umts";
  82                         gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
  83                 };
  84                 wifi: wifi {
  85                         label = "red:wifi";
  86                         gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
  87                 };
  88                 fxs1 {
  89                         label = "green:tae-n";
  90                         gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
  91                 };
  92                 fxs2 {
  93                         label = "green:tae-u";
  94                         gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
  95                 };
  96                 fxo {
  97                         label = "green:isdn";
  98                         gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
  99                 };
 100                 internet2 {
 101                         label = "blue:internet";
 102                         gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
 103                 };
 104                 voice2 {
 105                         label = "blue:voice";
 106                         gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
 107                 };
 108         };
 109
 110         usb_vbus: regulator-usb-vbus {
 111                 compatible = "regulator-fixed";
 112
 113                 regulator-name = "USB_VBUS";
 114
 115                 regulator-min-microvolt = <5000000>;
 116                 regulator-max-microvolt = <5000000>;
 117
 118                 gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
 119                 enable-active-high;
 120         };
 121 };
 122
 123 &gpio {
 124         pinctrl-names = "default";
 125         pinctrl-0 = <&state_default>;
 126
 127         state_default: pinmux {
 128                 ebu {
 129                         lantiq,groups = "ebu cs1";
 130                         lantiq,function = "ebu";
 131                 };
 132                 exin {
 133                         lantiq,groups = "exin1";
 134                         lantiq,function = "exin";
 135                         lantiq,pull = <2>;
 136                         lantiq,output = <0>;
 137                 };
 138                 pci_rst {
 139                         lantiq,pins = "io21";
 140                         lantiq,pull = <2>;
 141                         lantiq,output = <1>;
 142                 };
 143                 leds {
 144                         lantiq,pins = "io3", "io5", "io6", "io8";
 145                         lantiq,output = <1>;
 146                         lantiq,pull = <0>;
 147                 };
 148                 keys {
 149                         lantiq,pins = "io11", "io12", "io13", "io28";
 150                         lantiq,output = <0>;
 151                         lantiq,pull = <2>;
 152                         lantiq,open-drain = <1>;
 153                 };
 154         };
 155 };
 156
 157 &gsw {
 158         phy-mode = "rmii";
 159         mtd-mac-address = <&boardconfig 0x16>;
 160 };
 161
 162 &localbus {
 163         flash@0 {
 164                 compatible = "lantiq,nor";
 165                 bank-width = <2>;
 166                 reg = <0 0x0 0x800000>;
 167
 168                 partitions {
 169                         compatible = "fixed-partitions";
 170                         #address-cells = <1>;
 171                         #size-cells = <1>;
 172
 173                         partition@0 {
 174                                 label = "uboot";
 175                                 reg = <0x00000 0x10000>;
 176                                 read-only;
 177                         };
 178
 179                         partition@10000 {
 180                                 label = "u-boot-env";
 181                                 reg = <0x10000 0x10000>;
 182                                 read-only;
 183                         };
 184
 185                         partition@20000 {
 186                                 label = "firmware";
 187                                 reg = <0x20000 0x7d0000>;
 188                         };
 189
 190                         boardconfig: partition@7f0000 {
 191                                 label = "board_config";
 192                                 reg = <0x7f0000 0x10000>;
 193                                 read-only;
 194                         };
 195                 };
 196         };
 197
 198         gpiomm: gpio@1 {
 199                 compatible = "lantiq,gpio-mm";
 200                 reg = <1 0x0 0x10 >;
 201                 #address-cells = <1>;
 202                 #size-cells = <1>;
 203                 #gpio-cells = <2>;
 204                 gpio-controller;
 205                 lantiq,shadow = <0x3>;
 206         };
 207 };
 208
 209 &pci0 {
 210         status = "okay";
 211
 212         pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>, <&pci_req2_pins>;
 213         pinctrl-names = "default";
 214
 215         lantiq,external-clock;
 216         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 217         interrupt-map = <0x7000 0 0 1 &icu0 135>;
 218         req-mask = <0x3>;
 219
 220         wifi0: wifi@1814,0601 {
 221                 compatible = "pci1814,0601";
 222                 reg = <0x7000 0 0 0 0>;
 223                 mtd-mac-address = <&boardconfig 0x16>;
 224                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 225                 ralink,mtd-eeprom-swap;
 226         };
 227 };
 228
 229 &usb_phy {
 230         status = "okay";
 231 };
 232
 233 &usb {
 234         status = "okay";
 235         vbus-supply = <&usb_vbus>;
 236 };
 237
 238 &vmmc {
 239         status = "okay";
 240         gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
 241 };