target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7506pw11.dts

   1 #include "danube.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         compatible = "arcadyan,arv7506pw11", "lantiq,xway", "lantiq,danube";
   7         model = "Alice/O2 IAD 4421";
   8
   9         chosen {
  10                 bootargs = "console=ttyLTQ0,115200";
  11         };
  12
  13         aliases {
  14                 led-boot = &power;
  15                 led-failsafe = &power_red;
  16                 led-running = &power;
  17                 led-upgrade = &power;
  18
  19                 led-dsl = &dsl;
  20                 led-internet = &internet;
  21                 led-wifi = &wlan;
  22         };
  23
  24         memory@0 {
  25                 device_type = "memory";
  26                 reg = <0x0 0x4000000>;
  27         };
  28
  29         keys {
  30                 compatible = "gpio-keys-polled";
  31                 poll-interval = <100>;
  32
  33                 rfkill {
  34                         label = "rfkill";
  35                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  36                         linux,code = <KEY_RFKILL>;
  37                 };
  38                 reset {
  39                         label = "reset";
  40                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
  41                         linux,code = <KEY_RESTART>;
  42                 };
  43         };
  44
  45         leds {
  46                 compatible = "gpio-leds";
  47                 wlan: wlan {
  48                         label = "green:wlan";
  49                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  50                 };
  51                 power: power {
  52                         label = "green:power";
  53                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  54                         default-state = "keep";
  55                 };
  56                 dsl: dsl {
  57                         label = "green:dsl";
  58                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  59                 };
  60                 internet: internet {
  61                         label = "green:internet";
  62                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  63                 };
  64                 power_red: power_red {
  65                         label = "red:power";
  66                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  67                 };
  68                 internet_red {
  69                         label = "red:internet";
  70                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  71                 };
  72                 info {
  73                         label = "green:info";
  74                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  75                 };
  76                 telefon {
  77                         label = "green:telefon";
  78                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  79                 };
  80                 info_red {
  81                         label = "red:info";
  82                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  83                 };
  84         };
  85 };
  86
  87 &gpio {
  88         pinctrl-names = "default";
  89         pinctrl-0 = <&state_default>;
  90
  91         state_default: pinmux {
  92                 pci_rst {
  93                         lantiq,pins = "io21";
  94                         lantiq,pull = <2>;
  95                         lantiq,output = <1>;
  96                 };
  97         };
  98 };
  99
 100 /* GPIO 19: switch reset */
 101 &gsw {
 102         phy-mode = "rmii";
 103         nvmem-cells = <&macaddr_boardconfig_16 0>;
 104         nvmem-cell-names = "mac-address";
 105 };
 106
 107 &localbus {
 108         flash@0 {
 109                 compatible = "lantiq,nor";
 110                 bank-width = <2>;
 111                 reg = <0 0x0 0x800000>;
 112
 113                 partitions {
 114                         compatible = "fixed-partitions";
 115                         #address-cells = <1>;
 116                         #size-cells = <1>;
 117
 118                         partition@0 {
 119                                 label = "uboot";
 120                                 reg = <0x00000 0x40000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@40000 {
 125                                 label = "u-boot-env";
 126                                 reg = <0x40000 0x10000>;
 127                                 read-only;
 128                         };
 129
 130                         partition@50000 {
 131                                 label = "firmware";
 132                                 reg = <0x50000 0x7a0000>;
 133                         };
 134
 135                         boardconfig: partition@7f0000 {
 136                                 label = "board_config";
 137                                 reg = <0x7f0000 0x10000>;
 138                                 read-only;
 139
 140                                 nvmem-layout {
 141                                         compatible = "fixed-layout";
 142                                         #address-cells = <1>;
 143                                         #size-cells = <1>;
 144
 145                                         macaddr_boardconfig_16: macaddr@16 {
 146                                                 compatible = "mac-base";
 147                                                 reg = <0x16 0x6>;
 148                                                 #nvmem-cell-cells = <1>;
 149                                         };
 150                                 };
 151                         };
 152                 };
 153         };
 154 };
 155
 156 &pci0 {
 157         status = "okay";
 158
 159         pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
 160         pinctrl-names = "default";
 161
 162         lantiq,external-clock;
 163         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 164
 165         wifi@1814,3592 {
 166                 compatible = "pci1814,3592";
 167                 reg = <0x7000 0 0 0 0>;
 168                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 169                 ralink,eeprom-swap;
 170                 nvmem-cells = <&macaddr_boardconfig_16 1>;
 171                 nvmem-cell-names = "mac-address";
 172         };
 173 };