target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f3.dts

   1 #include "vr9_zyxel_p-2812hnu-fx.dtsi"
   2
   3 / {
   4         compatible = "zyxel,p-2812hnu-f3", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
   5         model = "ZyXEL P-2812HNU-F3";
   6 };
   7
   8 &pci0 {
   9         wifi@1814,3092 {
  10                 compatible = "pci1814,3092";
  11                 reg = <0x7000 0 0 0 0>;
  12                 ralink,eeprom = "RT3092.eeprom";
  13         };
  14 };
  15
  16 &localbus {
  17         flash@0 {
  18                 compatible = "lantiq,nor";
  19                 bank-width = <2>;
  20                 reg = <0 0x0 0x800000>;
  21
  22                 pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
  23                 pinctrl-names = "default";
  24
  25                 partitions {
  26                         compatible = "fixed-partitions";
  27                         #address-cells = <1>;
  28                         #size-cells = <1>;
  29
  30                         partition@0 {
  31                                 label = "uboot";
  32                                 reg = <0x0 0x50000>;
  33                                 read-only;
  34                         };
  35                         partition@50000 {
  36                                 label = "u-boot-env";
  37                                 reg = <0x50000 0x10000>;
  38                         };
  39                         partition@60000 {
  40                                 label = "unused";
  41                                 reg = <0x60000 0x7a0000>;
  42                         };
  43                 };
  44         };
  45
  46         flash@1 {
  47                 compatible = "lantiq,nand-xway";
  48                 lantiq,cs = <1>;
  49                 bank-width = <2>;
  50                 reg = <1 0x0 0x2000000>;
  51                 #address-cells = <1>;
  52                 #size-cells = <1>;
  53
  54                 nand-use-soft-ecc-engine;
  55
  56                 partition@0 {
  57                         label = "kernel";
  58                         reg = <0x0 0x200000>;
  59                 };
  60                 partition@200000 {
  61                         label = "ubi";
  62                         reg = <0x200000 0x7e00000>;
  63                 };
  64         };
  65 };