target/linux/layerscape/image/armv8_64b.mk

   1 #
   2 # Copyright 2018-2020 NXP
   3 #
   4 # This is free software, licensed under the GNU General Public License v2.
   5 # See /LICENSE for more information.
   6 #
   7
   8 define Device/Default
   9   PROFILES := Default
  10   IMAGES := firmware.bin sysupgrade.bin
  11   FILESYSTEMS := squashfs
  12   KERNEL := kernel-bin | gzip | uImage gzip
  13   KERNEL_LOADADDR := 0x80080000
  14   KERNEL_ENTRY_POINT := 0x80080000
  15   IMAGE/sysupgrade.bin := append-kernel | pad-to 16M | \
  16     append-rootfs | pad-rootfs | check-size 50331649 | append-metadata
  17 endef
  18
  19 define Device/ls1012afrdm
  20   DEVICE_VENDOR := NXP
  21   DEVICE_MODEL := FRDM-LS1012A
  22   DEVICE_PACKAGES += \
  23     layerscape-ppfe \
  24     tfa-ls1012afrdm \
  25     kmod-ppfe
  26   DEVICE_DTS := freescale/fsl-ls1012a-frdm
  27   BLOCKSIZE := 256KiB
  28   IMAGE/firmware.bin := \
  29     ls-clean | \
  30     ls-append $(1)-bl2.pbl | pad-to 1M | \
  31     ls-append $(1)-fip.bin | pad-to 5M | \
  32     ls-append $(1)-uboot-env.bin | pad-to 10M | \
  33     ls-append pfe.itb | pad-to 15M | \
  34     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  35     append-kernel | pad-to $$(BLOCKSIZE) | \
  36     append-rootfs | pad-rootfs | check-size 67108865
  37   IMAGE/sysupgrade.bin := append-kernel | pad-to $$(BLOCKSIZE) | \
  38         append-rootfs | pad-rootfs | check-size 50331648 | append-metadata
  39   KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  40   KERNEL_INITRAMFS := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  41   SUPPORTED_DEVICES := fsl,ls1012a-frdm
  42 endef
  43 TARGET_DEVICES += ls1012afrdm
  44
  45 define Device/ls1012ardb
  46   DEVICE_VENDOR := NXP
  47   DEVICE_MODEL := LS1012A-RDB
  48   DEVICE_PACKAGES += \
  49     layerscape-ppfe \
  50     tfa-ls1012ardb \
  51     kmod-ppfe
  52   DEVICE_DTS := freescale/fsl-ls1012a-rdb
  53   IMAGE/firmware.bin := \
  54     ls-clean | \
  55     ls-append $(1)-bl2.pbl | pad-to 1M | \
  56     ls-append $(1)-fip.bin | pad-to 5M | \
  57     ls-append $(1)-uboot-env.bin | pad-to 10M | \
  58     ls-append pfe.itb | pad-to 15M | \
  59     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  60     append-kernel | pad-to 32M | \
  61     append-rootfs | pad-rootfs | check-size 67108865
  62   SUPPORTED_DEVICES := fsl,ls1012a-rdb
  63 endef
  64 TARGET_DEVICES += ls1012ardb
  65
  66 define Device/ls1012afrwy
  67   DEVICE_VENDOR := NXP
  68   DEVICE_MODEL := FRWY-LS1012A
  69   DEVICE_PACKAGES += \
  70     layerscape-ppfe \
  71     tfa-ls1012afrwy \
  72     kmod-ppfe
  73   DEVICE_DTS := freescale/fsl-ls1012a-frwy
  74   FILESYSTEMS := ext4
  75   IMAGES := firmware.bin sdcard.img sysupgrade.bin
  76   IMAGE/firmware.bin := \
  77     ls-clean | \
  78     ls-append $(1)-bl2.pbl | pad-to 128K | \
  79     ls-append pfe.itb | pad-to 384K | \
  80     ls-append $(1)-fip.bin | pad-to 1856K | \
  81     ls-append $(1)-uboot-env.bin | pad-to 2048K | \
  82     check-size 2097153
  83   IMAGE/sdcard.img := \
  84     ls-clean | \
  85     ls-append-sdhead $(1) | pad-to 15M | \
  86     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  87     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
  88     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
  89   IMAGE/sysupgrade.bin := \
  90     ls-clean | \
  91     ls-append-sdhead $(1) | pad-to 16M | \
  92     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
  93     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
  94   SUPPORTED_DEVICES := fsl,ls1012a-frwy-sdboot
  95 endef
  96 TARGET_DEVICES += ls1012afrwy
  97
  98 define Device/ls1043ardb
  99   DEVICE_VENDOR := NXP
 100   DEVICE_MODEL := LS1043A-RDB
 101   DEVICE_VARIANT := Default
 102   DEVICE_PACKAGES += \
 103     layerscape-fman \
 104     tfa-ls1043ardb \
 105     fmc fmc-eth-config
 106   DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
 107   IMAGE/firmware.bin := \
 108     ls-clean | \
 109     ls-append $(1)-bl2.pbl | pad-to 1M | \
 110     ls-append $(1)-fip.bin | pad-to 5M | \
 111     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 112     ls-append $(1)-fman.bin | pad-to 15M | \
 113     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 114     append-kernel | pad-to 32M | \
 115     append-rootfs | pad-rootfs | check-size 67108865
 116   SUPPORTED_DEVICES := fsl,ls1043a-rdb
 117 endef
 118 TARGET_DEVICES += ls1043ardb
 119
 120 define Device/ls1043ardb-sdboot
 121   DEVICE_VENDOR := NXP
 122   DEVICE_MODEL := LS1043A-RDB
 123   DEVICE_VARIANT := SD Card Boot
 124   DEVICE_PACKAGES += \
 125     layerscape-fman \
 126     tfa-ls1043ardb-sdboot \
 127     fmc fmc-eth-config
 128   DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
 129   FILESYSTEMS := ext4
 130   IMAGES := sdcard.img sysupgrade.bin
 131   IMAGE/sdcard.img := \
 132     ls-clean | \
 133     ls-append-sdhead $(1) | pad-to 4K | \
 134     ls-append $(1)-bl2.pbl | pad-to 1M | \
 135     ls-append $(1)-fip.bin | pad-to 5M | \
 136     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 137     ls-append ls1043ardb-fman.bin | pad-to 15M | \
 138     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 139     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 140     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 141   IMAGE/sysupgrade.bin := \
 142     ls-clean | \
 143     ls-append-sdhead $(1) | pad-to 16M | \
 144     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 145     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
 146   SUPPORTED_DEVICES := fsl,ls1043a-rdb-sdboot
 147 endef
 148 TARGET_DEVICES += ls1043ardb-sdboot
 149
 150 define Device/ls1046ardb
 151   DEVICE_VENDOR := NXP
 152   DEVICE_MODEL := LS1046A-RDB
 153   DEVICE_VARIANT := Default
 154   DEVICE_PACKAGES += \
 155     layerscape-fman \
 156     tfa-ls1046ardb \
 157     fmc fmc-eth-config
 158   DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
 159   IMAGE/firmware.bin := \
 160     ls-clean | \
 161     ls-append $(1)-bl2.pbl | pad-to 1M | \
 162     ls-append $(1)-fip.bin | pad-to 5M | \
 163     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 164     ls-append $(1)-fman.bin | pad-to 15M | \
 165     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 166     append-kernel | pad-to 32M | \
 167     append-rootfs | pad-rootfs | check-size 67108865
 168   SUPPORTED_DEVICES := fsl,ls1046a-rdb
 169 endef
 170 TARGET_DEVICES += ls1046ardb
 171
 172 define Device/ls1046ardb-sdboot
 173   DEVICE_VENDOR := NXP
 174   DEVICE_MODEL := LS1046A-RDB
 175   DEVICE_VARIANT := SD Card Boot
 176   DEVICE_PACKAGES += \
 177     layerscape-fman \
 178     tfa-ls1046ardb-sdboot \
 179     fmc fmc-eth-config
 180   DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
 181   FILESYSTEMS := ext4
 182   IMAGES := sdcard.img sysupgrade.bin
 183   IMAGE/sdcard.img := \
 184     ls-clean | \
 185     ls-append-sdhead $(1) | pad-to 4K | \
 186     ls-append $(1)-bl2.pbl | pad-to 1M | \
 187     ls-append $(1)-fip.bin | pad-to 5M | \
 188     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 189     ls-append ls1046ardb-fman.bin | pad-to 15M | \
 190     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 191     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 192     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 193   IMAGE/sysupgrade.bin := \
 194     ls-clean | \
 195     ls-append-sdhead $(1) | pad-to 16M | \
 196     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 197     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
 198   SUPPORTED_DEVICES := fsl,ls1046a-rdb-sdboot
 199 endef
 200 TARGET_DEVICES += ls1046ardb-sdboot
 201
 202 define Device/ls1088ardb
 203   DEVICE_VENDOR := NXP
 204   DEVICE_MODEL := LS1088A-RDB
 205   DEVICE_VARIANT := Default
 206   DEVICE_PACKAGES += \
 207     layerscape-mc \
 208     layerscape-dpl \
 209     tfa-ls1088ardb \
 210     restool
 211   DEVICE_DTS := freescale/fsl-ls1088a-rdb
 212   IMAGE/firmware.bin := \
 213     ls-clean | \
 214     ls-append $(1)-bl2.pbl | pad-to 1M | \
 215     ls-append $(1)-fip.bin | pad-to 5M | \
 216     ls-append $(1)-uboot-env.bin | pad-to 10M | \
 217     ls-append $(1)-mc.itb | pad-to 13M | \
 218     ls-append $(1)-dpl.dtb | pad-to 14M | \
 219     ls-append $(1)-dpc.dtb | pad-to 15M | \
 220     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 221     append-kernel | pad-to 32M | \
 222     append-rootfs | pad-rootfs | check-size 67108865
 223   SUPPORTED_DEVICES := fsl,ls1088a-rdb
 224 endef
 225 TARGET_DEVICES += ls1088ardb
 226
 227 define Device/ls1088ardb-sdboot
 228   DEVICE_VENDOR := NXP
 229   DEVICE_MODEL := LS1088A-RDB
 230   DEVICE_VARIANT := SD Card Boot
 231   DEVICE_PACKAGES += \
 232     layerscape-mc \
 233     layerscape-dpl \
 234     tfa-ls1088ardb-sdboot \
 235     restool
 236   DEVICE_DTS := freescale/fsl-ls1088a-rdb
 237   FILESYSTEMS := ext4
 238   IMAGES := sdcard.img sysupgrade.bin
 239   IMAGE/sdcard.img := \
 240     ls-clean | \
 241     ls-append-sdhead $(1) | pad-to 4K | \
 242     ls-append $(1)-bl2.pbl | pad-to 1M | \
 243     ls-append $(1)-fip.bin | pad-to 5M | \
 244     ls-append $(1)-uboot-env.bin | pad-to 10M | \
 245     ls-append ls1088ardb-mc.itb | pad-to 13M | \
 246     ls-append ls1088ardb-dpl.dtb | pad-to 14M | \
 247     ls-append ls1088ardb-dpc.dtb | pad-to 15M | \
 248     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 249     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 250     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 251   IMAGE/sysupgrade.bin := \
 252     ls-clean | \
 253     ls-append-sdhead $(1) | pad-to 16M | \
 254     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 255     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
 256   SUPPORTED_DEVICES := fsl,ls1088a-rdb-sdboot
 257 endef
 258 TARGET_DEVICES += ls1088ardb-sdboot
 259
 260 define Device/ls2088ardb
 261   DEVICE_VENDOR := NXP
 262   DEVICE_MODEL := LS2088ARDB
 263   DEVICE_PACKAGES += \
 264     layerscape-mc \
 265     layerscape-dpl \
 266     tfa-ls2088ardb \
 267     restool
 268   DEVICE_DTS := freescale/fsl-ls2088a-rdb
 269   IMAGE/firmware.bin := \
 270     ls-clean | \
 271     ls-append $(1)-bl2.pbl | pad-to 1M | \
 272     ls-append $(1)-fip.bin | pad-to 5M | \
 273     ls-append $(1)-uboot-env.bin | pad-to 10M | \
 274     ls-append $(1)-mc.itb | pad-to 13M | \
 275     ls-append $(1)-dpl.dtb | pad-to 14M | \
 276     ls-append $(1)-dpc.dtb | pad-to 15M | \
 277     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 278     append-kernel | pad-to 32M | \
 279     append-rootfs | pad-rootfs | check-size 67108865
 280   SUPPORTED_DEVICES := fsl,ls2088a-rdb
 281 endef
 282 TARGET_DEVICES += ls2088ardb
 283
 284 define Device/traverse-ls1043
 285   DEVICE_VENDOR := Traverse
 286   DEVICE_MODEL := LS1043 Boards
 287   KERNEL_NAME := Image
 288   KERNEL_SUFFIX := -kernel.itb
 289   KERNEL_INSTALL := 1
 290   FDT_LOADADDR = 0x90000000
 291   FILESYSTEMS := ubifs
 292   MKUBIFS_OPTS := -m 1 -e 262016 -c 128
 293   DEVICE_PACKAGES += \
 294     layerscape-fman \
 295     uboot-envtools \
 296     kmod-i2c-mux-pca954x \
 297     kmod-hwmon-core \
 298     kmod-gpio-pca953x kmod-input-gpio-keys-polled \
 299     kmod-rtc-isl1208
 300   DEVICE_DESCRIPTION = \
 301     Build images for Traverse LS1043 boards. This generates a single image \
 302     capable of booting on any of the boards in this family.
 303   DEVICE_DTS = freescale/traverse-ls1043s
 304   DEVICE_DTS_DIR = $(LINUX_DIR)/arch/arm64/boot/dts
 305   DEVICE_DTS_CONFIG = ls1043s
 306   KERNEL := kernel-bin | gzip | traverse-fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
 307   KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
 308   IMAGES = root sysupgrade.bin
 309   IMAGE/root = append-rootfs
 310   IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
 311   MKUBIFS_OPTS := -m 2048 -e 124KiB -c 4096
 312   SUPPORTED_DEVICES := traverse,ls1043s traverse,ls1043v
 313 endef
 314 TARGET_DEVICES += traverse-ls1043