target/linux/mediatek/image/filogic.mk

   1 DTS_DIR := $(DTS_DIR)/mediatek
   2
   3 define Image/Prepare
   4         # For UBI we want only one extra block
   5         rm -f $(KDIR)/ubi_mark
   6         echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
   7 endef
   8
   9 define Build/mt7981-bl2
  10         cat $(STAGING_DIR_IMAGE)/mt7981-$1-bl2.img >> $@
  11 endef
  12
  13 define Build/mt7981-bl31-uboot
  14         cat $(STAGING_DIR_IMAGE)/mt7981_$1-u-boot.fip >> $@
  15 endef
  16
  17 define Build/mt7986-bl2
  18         cat $(STAGING_DIR_IMAGE)/mt7986-$1-bl2.img >> $@
  19 endef
  20
  21 define Build/mt7986-bl31-uboot
  22         cat $(STAGING_DIR_IMAGE)/mt7986_$1-u-boot.fip >> $@
  23 endef
  24
  25 define Build/mt7988-bl2
  26         cat $(STAGING_DIR_IMAGE)/mt7988-$1-bl2.img >> $@
  27 endef
  28
  29 define Build/mt7988-bl31-uboot
  30         cat $(STAGING_DIR_IMAGE)/mt7988_$1-u-boot.fip >> $@
  31 endef
  32
  33 define Build/mt798x-gpt
  34         cp $@ $@.tmp 2>/dev/null || true
  35         ptgen -g -o $@.tmp -a 1 -l 1024 \
  36                 $(if $(findstring sdmmc,$1), \
  37                         -H \
  38                         -t 0x83 -N bl2          -r      -p 4079k@17k \
  39                 ) \
  40                         -t 0x83 -N ubootenv     -r      -p 512k@4M \
  41                         -t 0x83 -N factory      -r      -p 2M@4608k \
  42                         -t 0xef -N fip          -r      -p 4M@6656k \
  43                                 -N recovery     -r      -p 32M@12M \
  44                 $(if $(findstring sdmmc,$1), \
  45                                 -N install      -r      -p 20M@44M \
  46                         -t 0x2e -N production           -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
  47                 ) \
  48                 $(if $(findstring emmc,$1), \
  49                         -t 0x2e -N production           -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
  50                 )
  51         cat $@.tmp >> $@
  52         rm $@.tmp
  53 endef
  54
  55 metadata_gl_json = \
  56         '{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
  57                 "metadata_version": "1.1", \
  58                 "compat_version": "$(call json_quote,$(compat_version))", \
  59                 $(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
  60                 $(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
  61                         [$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma) \
  62                         "supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
  63                 $(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma)) \
  64                 "version": { \
  65                         "release": "$(call json_quote,$(VERSION_NUMBER))", \
  66                         "date": "$(shell TZ='Asia/Chongqing' date '+%Y%m%d%H%M%S')", \
  67                         "dist": "$(call json_quote,$(VERSION_DIST))", \
  68                         "version": "$(call json_quote,$(VERSION_NUMBER))", \
  69                         "revision": "$(call json_quote,$(REVISION))", \
  70                         "target": "$(call json_quote,$(TARGETID))", \
  71                         "board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
  72                 } \
  73         }'
  74
  75 define Build/append-gl-metadata
  76         $(if $(SUPPORTED_DEVICES),-echo $(call metadata_gl_json,$(SUPPORTED_DEVICES)) | fwtool -I - $@)
  77         sha256sum "$@" | cut -d" " -f1 > "$@.sha256sum"
  78         [ ! -s "$(BUILD_KEY)" -o ! -s "$(BUILD_KEY).ucert" -o ! -s "$@" ] || { \
  79                 cp "$(BUILD_KEY).ucert" "$@.ucert" ;\
  80                 usign -S -m "$@" -s "$(BUILD_KEY)" -x "$@.sig" ;\
  81                 ucert -A -c "$@.ucert" -x "$@.sig" ;\
  82                 fwtool -S "$@.ucert" "$@" ;\
  83         }
  84 endef
  85
  86 define Build/zyxel-nwa-fit-filogic
  87         $(TOPDIR)/scripts/mkits-zyxel-fit-filogic.sh \
  88                 $@.its $@ "80 e1 ff ff ff ff ff ff ff ff"
  89         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  90         @mv $@.new $@
  91 endef
  92
  93 define Build/cetron-header
  94         $(eval magic=$(word 1,$(1)))
  95         $(eval model=$(word 2,$(1)))
  96         ( \
  97                 dd if=/dev/zero bs=856 count=1 2>/dev/null; \
  98                 printf "$(model)," | dd bs=128 count=1 conv=sync 2>/dev/null; \
  99                 md5sum $@ | cut -f1 -d" " | dd bs=32 count=1 2>/dev/null; \
 100                 printf "$(magic)" | dd bs=4 count=1 conv=sync 2>/dev/null; \
 101                 cat $@; \
 102         ) > $@.tmp
 103         fw_crc=$$(gzip -c $@.tmp | tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n'); \
 104         printf "$$(echo $$fw_crc | sed 's/../\\x&/g')" | cat - $@.tmp > $@
 105         rm $@.tmp
 106 endef
 107
 108 define Device/asus_tuf-ax4200
 109   DEVICE_VENDOR := ASUS
 110   DEVICE_MODEL := TUF-AX4200
 111   DEVICE_DTS := mt7986a-asus-tuf-ax4200
 112   DEVICE_DTS_DIR := ../dts
 113   DEVICE_DTS_LOADADDR := 0x47000000
 114   DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
 115   IMAGES := sysupgrade.bin
 116   KERNEL := kernel-bin | lzma | \
 117         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
 118   KERNEL_INITRAMFS := kernel-bin | lzma | \
 119         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 120   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 121 endef
 122 TARGET_DEVICES += asus_tuf-ax4200
 123
 124 define Device/acer_predator-w6
 125   DEVICE_VENDOR := Acer
 126   DEVICE_MODEL := Predator W6
 127   DEVICE_DTS := mt7986a-acer-predator-w6
 128   DEVICE_DTS_DIR := ../dts
 129   DEVICE_DTS_LOADADDR := 0x47000000
 130   DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware kmod-mt7916-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
 131   IMAGES := sysupgrade.bin
 132   KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
 133   KERNEL_INITRAMFS := kernel-bin | lzma | \
 134         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 135   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 136 endef
 137 TARGET_DEVICES += acer_predator-w6
 138
 139 define Device/bananapi_bpi-r3
 140   DEVICE_VENDOR := Bananapi
 141   DEVICE_MODEL := BPi-R3
 142   DEVICE_DTS := mt7986a-bananapi-bpi-r3
 143   DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3
 144   DEVICE_DTS_OVERLAY:= mt7986a-bananapi-bpi-r3-emmc mt7986a-bananapi-bpi-r3-nand mt7986a-bananapi-bpi-r3-nor mt7986a-bananapi-bpi-r3-sd
 145   DEVICE_DTS_DIR := $(DTS_DIR)/
 146   DEVICE_DTS_LOADADDR := 0x43f00000
 147   DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-gpio kmod-mt7986-firmware kmod-sfp kmod-usb3 e2fsprogs f2fsck mkf2fs mt7986-wo-firmware
 148   IMAGES := sysupgrade.itb
 149   KERNEL_LOADADDR := 0x44000000
 150   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 151   ARTIFACTS := \
 152                emmc-preloader.bin emmc-bl31-uboot.fip \
 153                nor-preloader.bin nor-bl31-uboot.fip \
 154                sdcard.img.gz \
 155                snand-preloader.bin snand-bl31-uboot.fip
 156   ARTIFACT/emmc-preloader.bin   := mt7986-bl2 emmc-ddr4
 157   ARTIFACT/emmc-bl31-uboot.fip  := mt7986-bl31-uboot bananapi_bpi-r3-emmc
 158   ARTIFACT/nor-preloader.bin    := mt7986-bl2 nor-ddr4
 159   ARTIFACT/nor-bl31-uboot.fip   := mt7986-bl31-uboot bananapi_bpi-r3-nor
 160   ARTIFACT/snand-preloader.bin  := mt7986-bl2 spim-nand-ddr4
 161   ARTIFACT/snand-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-snand
 162   ARTIFACT/sdcard.img.gz        := mt798x-gpt sdmmc |\
 163                                    pad-to 17k | mt7986-bl2 sdmmc-ddr4 |\
 164                                    pad-to 6656k | mt7986-bl31-uboot bananapi_bpi-r3-sdmmc |\
 165                                 $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
 166                                    pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
 167                                 ) \
 168                                    pad-to 44M | mt7986-bl2 spim-nand-ddr4 |\
 169                                    pad-to 45M | mt7986-bl31-uboot bananapi_bpi-r3-snand |\
 170                                    pad-to 49M | mt7986-bl2 nor-ddr4 |\
 171                                    pad-to 50M | mt7986-bl31-uboot bananapi_bpi-r3-nor |\
 172                                    pad-to 51M | mt7986-bl2 emmc-ddr4 |\
 173                                    pad-to 52M | mt7986-bl31-uboot bananapi_bpi-r3-emmc |\
 174                                    pad-to 56M | mt798x-gpt emmc |\
 175                                 $(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
 176                                    pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
 177                                 ) \
 178                                   gzip
 179   IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
 180   KERNEL                        := kernel-bin | gzip
 181   KERNEL_INITRAMFS := kernel-bin | lzma | \
 182         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 183   IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
 184   DEVICE_DTC_FLAGS := --pad 4096
 185   DEVICE_COMPAT_VERSION := 1.1
 186   DEVICE_COMPAT_MESSAGE := Device tree overlay mechanism needs bootloader update
 187 endef
 188 TARGET_DEVICES += bananapi_bpi-r3
 189
 190 define Device/cetron_ct3003
 191   DEVICE_VENDOR := Cetron
 192   DEVICE_MODEL := CT3003
 193   DEVICE_DTS := mt7981b-cetron-ct3003
 194   DEVICE_DTS_DIR := ../dts
 195   SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
 196   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 197   UBINIZE_OPTS := -E 5
 198   BLOCKSIZE := 128k
 199   PAGESIZE := 2048
 200   KERNEL_IN_UBI := 1
 201   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 202   IMAGES += factory.bin
 203   IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | cetron-header rd30 CT3003
 204 endef
 205 TARGET_DEVICES += cetron_ct3003
 206
 207 define Device/cudy_wr3000-v1
 208   DEVICE_VENDOR := Cudy
 209   DEVICE_MODEL := WR3000
 210   DEVICE_VARIANT := v1
 211   DEVICE_DTS := mt7981b-cudy-wr3000-v1
 212   DEVICE_DTS_DIR := ../dts
 213   DEVICE_DTS_LOADADDR := 0x47000000
 214   IMAGES := sysupgrade.bin
 215   IMAGE_SIZE := 15424k
 216   SUPPORTED_DEVICES += R31
 217   KERNEL := kernel-bin | lzma | \
 218         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
 219   KERNEL_INITRAMFS := kernel-bin | lzma | \
 220         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 221   IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
 222   DEVICE_PACKAGES := kmod-mt7981-firmware
 223 endef
 224 TARGET_DEVICES += cudy_wr3000-v1
 225
 226 define Device/glinet_gl-mt3000
 227   DEVICE_VENDOR := GL.iNet
 228   DEVICE_MODEL := GL-MT3000
 229   DEVICE_DTS := mt7981b-glinet-gl-mt3000
 230   DEVICE_DTS_DIR := ../dts
 231   SUPPORTED_DEVICES += glinet,mt3000-snand
 232   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-hwmon-pwmfan kmod-usb3
 233   UBINIZE_OPTS := -E 5
 234   BLOCKSIZE := 128k
 235   PAGESIZE := 2048
 236   IMAGE_SIZE := 246272k
 237   KERNEL_IN_UBI := 1
 238   IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
 239 endef
 240 TARGET_DEVICES += glinet_gl-mt3000
 241
 242 define Device/h3c_magic-nx30-pro
 243   DEVICE_VENDOR := H3C
 244   DEVICE_MODEL := Magic NX30 Pro
 245   DEVICE_DTS := mt7981b-h3c-magic-nx30-pro
 246   DEVICE_DTS_DIR := ../dts
 247   UBINIZE_OPTS := -E 5
 248   BLOCKSIZE := 128k
 249   PAGESIZE := 2048
 250   KERNEL_IN_UBI := 1
 251   UBOOTENV_IN_UBI := 1
 252   IMAGE_SIZE := 65536k
 253   IMAGES := sysupgrade.itb
 254   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 255   KERNEL := kernel-bin | gzip
 256   KERNEL_INITRAMFS := kernel-bin | lzma | \
 257         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 258   IMAGE/sysupgrade.itb := append-kernel | \
 259         fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
 260   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 261   ARTIFACTS := preloader.bin bl31-uboot.fip
 262   ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
 263   ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot h3c_magic-nx30-pro
 264 endef
 265 TARGET_DEVICES += h3c_magic-nx30-pro
 266
 267 define Device/netgear_wax220
 268   DEVICE_VENDOR := NETGEAR
 269   DEVICE_MODEL := WAX220
 270   DEVICE_DTS := mt7986b-netgear-wax220
 271   DEVICE_DTS_DIR := ../dts
 272   NETGEAR_ENC_MODEL := WAX220
 273   NETGEAR_ENC_REGION := US
 274   DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
 275   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 276   IMAGE_SIZE := 32768k
 277   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 278   IMAGES += factory.img
 279   # Padding to 10M seems to be required by OEM web interface
 280   IMAGE/factory.img := sysupgrade-tar | \
 281           pad-to 10M | check-size | netgear-encrypted-factory
 282 endef
 283 TARGET_DEVICES += netgear_wax220
 284
 285 define Device/mediatek_mt7981-rfb
 286   DEVICE_VENDOR := MediaTek
 287   DEVICE_MODEL := MT7981 rfb
 288   DEVICE_DTS := mt7981-rfb
 289   DEVICE_DTS_OVERLAY:= \
 290         mt7981-rfb-spim-nand \
 291         mt7981-rfb-mxl-2p5g-phy-eth1 \
 292         mt7981-rfb-mxl-2p5g-phy-swp5
 293   DEVICE_DTS_DIR := $(DTS_DIR)/
 294   DEVICE_DTC_FLAGS := --pad 4096
 295   DEVICE_DTS_LOADADDR := 0x43f00000
 296   DEVICE_PACKAGES := kmod-mt7981-firmware kmod-usb3 e2fsprogs f2fsck mkf2fs mt7981-wo-firmware
 297   KERNEL_LOADADDR := 0x44000000
 298   KERNEL := kernel-bin | gzip
 299   KERNEL_INITRAMFS := kernel-bin | lzma | \
 300         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 301   KERNEL_INITRAMFS_SUFFIX := .itb
 302   KERNEL_IN_UBI := 1
 303   UBOOTENV_IN_UBI := 1
 304   IMAGES := sysupgrade.itb
 305   IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
 306   IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
 307   ARTIFACTS := \
 308         emmc-preloader.bin emmc-bl31-uboot.fip \
 309         nor-preloader.bin nor-bl31-uboot.fip \
 310         sdcard.img.gz \
 311         snfi-nand-preloader.bin snfi-nand-bl31-uboot.fip \
 312         spim-nand-preloader.bin spim-nand-bl31-uboot.fip
 313   ARTIFACT/emmc-preloader.bin           := mt7981-bl2 emmc-ddr3
 314   ARTIFACT/emmc-bl31-uboot.fip          := mt7981-bl31-uboot rfb-emmc
 315   ARTIFACT/nor-preloader.bin            := mt7981-bl2 nor-ddr3
 316   ARTIFACT/nor-bl31-uboot.fip           := mt7981-bl31-uboot rfb-emmc
 317   ARTIFACT/snfi-nand-preloader.bin      := mt7981-bl2 snand-ddr3
 318   ARTIFACT/snfi-nand-bl31-uboot.fip     := mt7981-bl31-uboot rfb-snfi
 319   ARTIFACT/spim-nand-preloader.bin      := mt7981-bl2 spim-nand-ddr3
 320   ARTIFACT/spim-nand-bl31-uboot.fip     := mt7981-bl31-uboot rfb-spim-nand
 321   ARTIFACT/sdcard.img.gz        := mt798x-gpt sdmmc |\
 322                                    pad-to 17k | mt7981-bl2 sdmmc-ddr3 |\
 323                                    pad-to 6656k | mt7981-bl31-uboot rfb-sd |\
 324                                 $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
 325                                    pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
 326                                 ) \
 327                                    pad-to 44M | mt7981-bl2 spim-nand-ddr3 |\
 328                                    pad-to 45M | mt7981-bl31-uboot rfb-spim-nand |\
 329                                    pad-to 49M | mt7981-bl2 nor-ddr3 |\
 330                                    pad-to 50M | mt7981-bl31-uboot rfb-nor |\
 331                                    pad-to 51M | mt7981-bl2 snand-ddr3 |\
 332                                    pad-to 53M | mt7981-bl31-uboot rfb-snfi |\
 333                                 $(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
 334                                    pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
 335                                 ) \
 336                                   gzip
 337 endef
 338 TARGET_DEVICES += mediatek_mt7981-rfb
 339
 340 define Device/mediatek_mt7986a-rfb-nand
 341   DEVICE_VENDOR := MediaTek
 342   DEVICE_MODEL := MT7986 rfba AP (NAND)
 343   DEVICE_DTS := mt7986a-rfb-spim-nand
 344   DEVICE_DTS_DIR := $(DTS_DIR)/
 345   DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
 346   SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
 347   UBINIZE_OPTS := -E 5
 348   BLOCKSIZE := 128k
 349   PAGESIZE := 2048
 350   IMAGE_SIZE := 65536k
 351   KERNEL_IN_UBI := 1
 352   IMAGES += factory.bin
 353   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
 354   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 355   KERNEL = kernel-bin | lzma | \
 356         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
 357   KERNEL_INITRAMFS = kernel-bin | lzma | \
 358         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
 359 endef
 360 TARGET_DEVICES += mediatek_mt7986a-rfb-nand
 361
 362 define Device/mediatek_mt7986b-rfb
 363   DEVICE_VENDOR := MediaTek
 364   DEVICE_MODEL := MTK7986 rfbb AP
 365   DEVICE_DTS := mt7986b-rfb
 366   DEVICE_DTS_DIR := $(DTS_DIR)/
 367   DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
 368   SUPPORTED_DEVICES := mediatek,mt7986b-rfb
 369   UBINIZE_OPTS := -E 5
 370   BLOCKSIZE := 128k
 371   PAGESIZE := 2048
 372   IMAGE_SIZE := 65536k
 373   KERNEL_IN_UBI := 1
 374   IMAGES += factory.bin
 375   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
 376   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 377 endef
 378 TARGET_DEVICES += mediatek_mt7986b-rfb
 379
 380 define Device/mediatek_mt7988a-rfb
 381   DEVICE_VENDOR := MediaTek
 382   DEVICE_MODEL := MT7988A rfb
 383   DEVICE_DTS := mt7988a-rfb
 384   DEVICE_DTS_OVERLAY:= \
 385         mt7988a-rfb-emmc \
 386         mt7988a-rfb-sd \
 387         mt7988a-rfb-snfi-nand \
 388         mt7988a-rfb-spim-nand \
 389         mt7988a-rfb-spim-nor \
 390         mt7988a-rfb-eth1-aqr \
 391         mt7988a-rfb-eth1-i2p5g-phy \
 392         mt7988a-rfb-eth1-mxl \
 393         mt7988a-rfb-eth1-sfp \
 394         mt7988a-rfb-eth2-aqr \
 395         mt7988a-rfb-eth2-mxl \
 396         mt7988a-rfb-eth2-sfp
 397   DEVICE_DTS_DIR := $(DTS_DIR)/
 398   DEVICE_DTC_FLAGS := --pad 4096
 399   DEVICE_DTS_LOADADDR := 0x45f00000
 400   DEVICE_PACKAGES := kmod-sfp
 401   KERNEL_LOADADDR := 0x46000000
 402   KERNEL := kernel-bin | gzip
 403   KERNEL_INITRAMFS := kernel-bin | lzma | \
 404         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 405   KERNEL_INITRAMFS_SUFFIX := .itb
 406   KERNEL_IN_UBI := 1
 407   IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
 408   IMAGES := sysupgrade.itb
 409   IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
 410   ARTIFACTS := \
 411                emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
 412                nor-preloader.bin nor-bl31-uboot.fip \
 413                sdcard.img.gz \
 414                snand-preloader.bin snand-bl31-uboot.fip
 415   ARTIFACT/emmc-gpt.bin         := mt798x-gpt emmc
 416   ARTIFACT/emmc-preloader.bin   := mt7988-bl2 emmc-comb
 417   ARTIFACT/emmc-bl31-uboot.fip  := mt7988-bl31-uboot rfb-emmc
 418   ARTIFACT/nor-preloader.bin    := mt7988-bl2 nor-comb
 419   ARTIFACT/nor-bl31-uboot.fip   := mt7988-bl31-uboot rfb-nor
 420   ARTIFACT/snand-preloader.bin  := mt7988-bl2 spim-nand-comb
 421   ARTIFACT/snand-bl31-uboot.fip := mt7988-bl31-uboot rfb-snand
 422   ARTIFACT/sdcard.img.gz        := mt798x-gpt sdmmc |\
 423                                    pad-to 17k | mt7988-bl2 sdmmc-comb |\
 424                                    pad-to 6656k | mt7988-bl31-uboot rfb-sd |\
 425                                 $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
 426                                    pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
 427                                 ) \
 428                                    pad-to 44M | mt7988-bl2 spim-nand-comb |\
 429                                    pad-to 45M | mt7988-bl31-uboot rfb-snand |\
 430                                    pad-to 51M | mt7988-bl2 nor-comb |\
 431                                    pad-to 51M | mt7988-bl31-uboot rfb-nor |\
 432                                    pad-to 55M | mt7988-bl2 emmc-comb |\
 433                                    pad-to 56M | mt7988-bl31-uboot rfb-emmc |\
 434                                    pad-to 62M | mt798x-gpt emmc |\
 435                                 $(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
 436                                    pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
 437                                 ) \
 438                                   gzip
 439 endef
 440 TARGET_DEVICES += mediatek_mt7988a-rfb
 441
 442 define Device/mercusys_mr90x-v1
 443   DEVICE_VENDOR := Mercusys
 444   DEVICE_MODEL := MR90X v1
 445   DEVICE_DTS := mt7986b-mercusys-mr90x-v1
 446   DEVICE_DTS_DIR := ../dts
 447   DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
 448   UBINIZE_OPTS := -E 5
 449   BLOCKSIZE := 128k
 450   PAGESIZE := 2048
 451   IMAGE_SIZE := 51200k
 452   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 453 endef
 454 TARGET_DEVICES += mercusys_mr90x-v1
 455
 456 define Device/qihoo_360t7
 457   DEVICE_VENDOR := Qihoo
 458   DEVICE_MODEL := 360T7
 459   DEVICE_DTS := mt7981b-qihoo-360t7
 460   DEVICE_DTS_DIR := ../dts
 461   UBINIZE_OPTS := -E 5
 462   BLOCKSIZE := 128k
 463   PAGESIZE := 2048
 464   KERNEL_IN_UBI := 1
 465   UBOOTENV_IN_UBI := 1
 466   IMAGES := sysupgrade.itb
 467   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 468   KERNEL := kernel-bin | gzip
 469   KERNEL_INITRAMFS := kernel-bin | lzma | \
 470         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 471   IMAGE/sysupgrade.itb := append-kernel | \
 472         fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
 473   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 474   ARTIFACTS := preloader.bin bl31-uboot.fip
 475   ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
 476   ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot qihoo_360t7
 477 endef
 478 TARGET_DEVICES += qihoo_360t7
 479
 480 define Device/tplink_tl-xdr-common
 481   DEVICE_VENDOR := TP-Link
 482   DEVICE_DTS_DIR := ../dts
 483   UBINIZE_OPTS := -E 5
 484   BLOCKSIZE := 128k
 485   PAGESIZE := 2048
 486   KERNEL_IN_UBI := 1
 487   UBOOTENV_IN_UBI := 1
 488   IMAGES := sysupgrade.itb
 489   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 490   KERNEL := kernel-bin | gzip
 491   KERNEL_INITRAMFS := kernel-bin | lzma | \
 492         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 493   IMAGE/sysupgrade.itb := append-kernel | \
 494         fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | append-metadata
 495   DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
 496   ARTIFACTS := preloader.bin bl31-uboot.fip
 497   ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
 498 endef
 499
 500 define Device/tplink_tl-xdr4288
 501   DEVICE_MODEL := TL-XDR4288
 502   DEVICE_DTS := mt7986a-tplink-tl-xdr4288
 503   ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr4288
 504   $(call Device/tplink_tl-xdr-common)
 505 endef
 506 TARGET_DEVICES += tplink_tl-xdr4288
 507
 508 define Device/tplink_tl-xdr6086
 509   DEVICE_MODEL := TL-XDR6086
 510   DEVICE_DTS := mt7986a-tplink-tl-xdr6086
 511   ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6086
 512   $(call Device/tplink_tl-xdr-common)
 513 endef
 514 TARGET_DEVICES += tplink_tl-xdr6086
 515
 516 define Device/tplink_tl-xdr6088
 517   DEVICE_MODEL := TL-XDR6088
 518   DEVICE_DTS := mt7986a-tplink-tl-xdr6088
 519   ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6088
 520   $(call Device/tplink_tl-xdr-common)
 521 endef
 522 TARGET_DEVICES += tplink_tl-xdr6088
 523
 524 define Device/ubnt_unifi-6-plus
 525   DEVICE_VENDOR := Ubiquiti
 526   DEVICE_MODEL := UniFi 6 Plus
 527   DEVICE_DTS := mt7981a-ubnt-unifi-6-plus
 528   DEVICE_DTS_DIR := ../dts
 529   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware e2fsprogs f2fsck mkf2fs fdisk partx-utils
 530   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 531 endef
 532 TARGET_DEVICES += ubnt_unifi-6-plus
 533
 534 define Device/xiaomi_mi-router-wr30u-112m-nmbm
 535   DEVICE_VENDOR := Xiaomi
 536   DEVICE_MODEL := Mi Router WR30U (112M UBI with NMBM-Enabled layout)
 537   DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-112m-nmbm
 538   DEVICE_DTS_DIR := ../dts
 539   UBINIZE_OPTS := -E 5
 540   BLOCKSIZE := 128k
 541   PAGESIZE := 2048
 542   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 543 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
 544   ARTIFACTS := initramfs-factory.ubi
 545   ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
 546 endif
 547   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 548 endef
 549 TARGET_DEVICES += xiaomi_mi-router-wr30u-112m-nmbm
 550
 551 define Device/xiaomi_mi-router-wr30u-stock
 552   DEVICE_VENDOR := Xiaomi
 553   DEVICE_MODEL := Mi Router WR30U (stock layout)
 554   DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-stock
 555   DEVICE_DTS_DIR := ../dts
 556   UBINIZE_OPTS := -E 5
 557   BLOCKSIZE := 128k
 558   PAGESIZE := 2048
 559   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 560 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
 561   ARTIFACTS := initramfs-factory.ubi
 562   ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
 563 endif
 564   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 565 endef
 566 TARGET_DEVICES += xiaomi_mi-router-wr30u-stock
 567
 568 define Device/xiaomi_mi-router-wr30u-ubootmod
 569   DEVICE_VENDOR := Xiaomi
 570   DEVICE_MODEL := Mi Router WR30U (OpenWrt U-Boot layout)
 571   DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-ubootmod
 572   DEVICE_DTS_DIR := ../dts
 573   UBINIZE_OPTS := -E 5
 574   BLOCKSIZE := 128k
 575   PAGESIZE := 2048
 576   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 577   KERNEL_IN_UBI := 1
 578   UBOOTENV_IN_UBI := 1
 579   IMAGES := sysupgrade.itb
 580   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 581   KERNEL := kernel-bin | gzip
 582   KERNEL_INITRAMFS := kernel-bin | lzma | \
 583         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 584   IMAGE/sysupgrade.itb := append-kernel | \
 585         fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
 586   ARTIFACTS := preloader.bin bl31-uboot.fip
 587   ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
 588   ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot xiaomi_mi-router-wr30u
 589 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
 590   ARTIFACTS += initramfs-factory.ubi
 591   ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
 592 endif
 593 endef
 594 TARGET_DEVICES += xiaomi_mi-router-wr30u-ubootmod
 595
 596 define Device/xiaomi_redmi-router-ax6000-stock
 597   DEVICE_VENDOR := Xiaomi
 598   DEVICE_MODEL := Redmi Router AX6000 (stock layout)
 599   DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-stock
 600   DEVICE_DTS_DIR := ../dts
 601   DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7986-firmware mt7986-wo-firmware
 602   UBINIZE_OPTS := -E 5
 603   BLOCKSIZE := 128k
 604   PAGESIZE := 2048
 605 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
 606   ARTIFACTS := initramfs-factory.ubi
 607   ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
 608 endif
 609   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 610 endef
 611 TARGET_DEVICES += xiaomi_redmi-router-ax6000-stock
 612
 613 define Device/xiaomi_redmi-router-ax6000-ubootmod
 614   DEVICE_VENDOR := Xiaomi
 615   DEVICE_MODEL := Redmi Router AX6000 (OpenWrt U-Boot layout)
 616   DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-ubootmod
 617   DEVICE_DTS_DIR := ../dts
 618   DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7986-firmware mt7986-wo-firmware
 619   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 620   IMAGES := sysupgrade.itb
 621   UBINIZE_OPTS := -E 5
 622   BLOCKSIZE := 128k
 623   PAGESIZE := 2048
 624   KERNEL_IN_UBI := 1
 625   UBOOTENV_IN_UBI := 1
 626   KERNEL := kernel-bin | gzip
 627   KERNEL_INITRAMFS := kernel-bin | lzma | \
 628         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 629   IMAGE/sysupgrade.itb := append-kernel | \
 630         fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
 631   ARTIFACTS := preloader.bin bl31-uboot.fip
 632   ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
 633   ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot xiaomi_redmi-router-ax6000
 634 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
 635   ARTIFACTS += initramfs-factory.ubi
 636   ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
 637 endif
 638 endef
 639 TARGET_DEVICES += xiaomi_redmi-router-ax6000-ubootmod
 640
 641 define Device/zyxel_ex5601-t0-stock
 642   DEVICE_VENDOR := Zyxel
 643   DEVICE_MODEL := EX5601-T0  (stock layout)
 644   DEVICE_DTS := mt7986a-zyxel-ex5601-t0-stock
 645   DEVICE_DTS_DIR := ../dts
 646   DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
 647   SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
 648   UBINIZE_OPTS := -E 5
 649   BLOCKSIZE := 256k
 650   PAGESIZE := 4096
 651   IMAGE_SIZE := 65536k
 652   KERNEL_IN_UBI := 1
 653   IMAGES += factory.bin
 654   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
 655   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 656   KERNEL = kernel-bin | lzma | \
 657         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
 658   KERNEL_INITRAMFS = kernel-bin | lzma | \
 659         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
 660 endef
 661 TARGET_DEVICES += zyxel_ex5601-t0-stock
 662
 663 define Device/zyxel_ex5700-telenor
 664   DEVICE_VENDOR := ZyXEL
 665   DEVICE_MODEL := EX5700 (Telenor)
 666   DEVICE_DTS := mt7986a-zyxel-ex5700-telenor
 667   DEVICE_DTS_DIR := ../dts
 668   DEVICE_PACKAGES := kmod-mt7916-firmware kmod-ubootenv-nvram kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
 669   UBINIZE_OPTS := -E 5
 670   BLOCKSIZE := 128k
 671   PAGESIZE := 2048
 672   IMAGE_SIZE := 65536k
 673   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 674 endef
 675 TARGET_DEVICES += zyxel_ex5700-telenor
 676
 677 define Device/zyxel_nwa50ax-pro
 678   DEVICE_VENDOR := ZyXEL
 679   DEVICE_MODEL := NWA50AX Pro
 680   DEVICE_DTS := mt7981b-zyxel-nwa50ax-pro
 681   DEVICE_DTS_DIR := ../dts
 682   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware zyxel-bootconfig
 683   DEVICE_DTS_LOADADDR := 0x44000000
 684   UBINIZE_OPTS := -E 5
 685   BLOCKSIZE := 128k
 686   PAGESIZE := 2048
 687   IMAGE_SIZE := 51200k
 688   KERNEL_IN_UBI := 1
 689   IMAGES += factory.bin
 690   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) | zyxel-nwa-fit-filogic
 691   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 692 endef
 693 TARGET_DEVICES += zyxel_nwa50ax-pro