b66df862fb344b55fb0afd502ecb2ba24b21d6d3
[openwrt/openwrt.git] / target / linux / ramips / dts / CF-WR800N.dts
1 /dts-v1/;
2
3 #include "mt7620n.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "comfast,cf-wr800n", "ralink,mt7620n-soc";
10 model = "Comfast CF-WR800N";
11
12 chosen {
13 bootargs = "console=ttyS0,115200";
14 };
15
16 gpio-leds {
17 compatible = "gpio-leds";
18
19 ethernet {
20 label = "cf-wr800n:white:ethernet";
21 gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
22 };
23
24 wifi {
25 label = "cf-wr800n:white:wifi";
26 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
27 };
28
29 wps {
30 label = "cf-wr800n:white:wps";
31 gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
32 };
33 };
34
35 gpio-keys-polled {
36 compatible = "gpio-keys-polled";
37 #address-cells = <1>;
38 #size-cells = <0>;
39 poll-interval = <20>;
40
41 reset {
42 label = "reset";
43 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_RESTART>;
45 };
46 };
47 };
48
49 &gpio0 {
50 status = "okay";
51 };
52
53 &gpio1 {
54 status = "okay";
55 };
56
57 &gpio2 {
58 status = "okay";
59 };
60
61 &gpio3 {
62 status = "okay";
63 };
64
65 &spi0 {
66 status = "okay";
67
68 m25p80@0 {
69 #address-cells = <1>;
70 #size-cells = <1>;
71 compatible = "jedec,spi-nor";
72 reg = <0>;
73 spi-max-frequency = <10000000>;
74
75 partition@0 {
76 label = "u-boot";
77 reg = <0x0 0x30000>;
78 read-only;
79 };
80
81 partition@30000 {
82 label = "u-boot-env";
83 reg = <0x30000 0x10000>;
84 read-only;
85 };
86
87 factory: partition@40000 {
88 label = "factory";
89 reg = <0x40000 0x10000>;
90 read-only;
91 };
92
93 partition@50000 {
94 label = "firmware";
95 reg = <0x50000 0x7b0000>;
96 };
97 };
98 };
99
100 &ethernet {
101 mtd-mac-address = <&factory 0x4>;
102 };
103
104 &wmac {
105 ralink,mtd-eeprom = <&factory 0>;
106 };
107
108 &pinctrl {
109 state_default: pinctrl0 {
110 default {
111 ralink,group = "ephy", "wled", "spi refclk", "i2c";
112 ralink,function = "gpio";
113 };
114 };
115 };