3760a465e019932d2ac6da25b86b098260f75aec
[openwrt/openwrt.git] / target / linux / ramips / dts / ESR-9753.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "ESR-9753", "ralink,rt3052-soc";
7 model = "Senao / EnGenius ESR-9753";
8
9 pinctrl {
10 state_default: pinctrl0 {
11 gpio {
12 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
13 ralink,function = "gpio";
14 };
15 };
16 };
17
18 cfi@1f000000 {
19 compatible = "cfi-flash";
20 reg = <0x1f000000 0x800000>;
21
22 bank-width = <2>;
23 device-width = <2>;
24 #address-cells = <1>;
25 #size-cells = <1>;
26
27 partition@0 {
28 label = "u-boot";
29 reg = <0x0 0x30000>;
30 read-only;
31 };
32
33 partition@30000 {
34 label = "u-boot-env";
35 reg = <0x30000 0x10000>;
36 read-only;
37 };
38
39 factory: partition@40000 {
40 label = "factory";
41 reg = <0x40000 0x10000>;
42 read-only;
43 };
44
45 partition@50000 {
46 label = "firmware";
47 reg = <0x50000 0x3b0000>;
48 };
49 };
50
51 gpio-leds {
52 compatible = "gpio-leds";
53 power {
54 label = "esr-9753:orange:power";
55 gpios = <&gpio0 8 1>;
56 };
57 wps {
58 label = "esr-9753:orange:wps";
59 gpios = <&gpio0 14 1>;
60 };
61 };
62
63 gpio-keys-polled {
64 compatible = "gpio-keys-polled";
65 #address-cells = <1>;
66 #size-cells = <0>;
67 poll-interval = <20>;
68 reset {
69 label = "reset";
70 gpios = <&gpio0 10 1>;
71 linux,code = <0x198>;
72 };
73 wps {
74 label = "wps";
75 gpios = <&gpio0 0 1>;
76 linux,code = <0x211>;
77 };
78 };
79
80 ethernet@10100000 {
81 mtd-mac-address = <&factory 0x4004>;
82 };
83
84 esw@10110000 {
85 ralink,portmap = <0x3e>;
86 };
87 };