bb38c88460944c281e023db5a873512aa46cfb8c
[openwrt/openwrt.git] / target / linux / ramips / dts / LINKIT7688.dts
1 /dts-v1/;
2
3 /include/ "mt7628an.dtsi"
4
5 / {
6 compatible = "mediatek,linkit", "mediatek,mt7628an-soc";
7 model = "MediaTek LinkIt Smart 7688";
8
9 chosen {
10 bootargs = "console=ttyS2,57600";
11 };
12
13 aliases {
14 serial0 = &uart2;
15 };
16
17 memory@0 {
18 device_type = "memory";
19 reg = <0x0 0x8000000>;
20 };
21
22 pinctrl {
23 state_default: pinctrl0 {
24 gpio {
25 ralink,group = "gpio";
26 ralink,function = "gpio";
27 };
28
29 perst {
30 ralink,group = "perst";
31 ralink,function = "gpio";
32 };
33
34 refclk {
35 ralink,group = "refclk";
36 ralink,function = "gpio";
37 };
38
39 i2s {
40 ralink,group = "i2s";
41 ralink,function = "gpio";
42 };
43
44 spis {
45 ralink,group = "spis";
46 ralink,function = "gpio";
47 };
48
49 wled_kn {
50 ralink,group = "wled_kn";
51 ralink,function = "gpio";
52 };
53
54 wled_an {
55 ralink,group = "wled_an";
56 ralink,function = "wled_an";
57 };
58
59 wdt {
60 ralink,group = "wdt";
61 ralink,function = "gpio";
62 };
63 };
64 };
65
66 wmac@10300000 {
67 status = "okay";
68 };
69
70 palmbus@10000000 {
71 spi@b00 {
72 status = "okay";
73
74 pinctrl-names = "default";
75 pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
76
77 m25p80@0 {
78 #address-cells = <1>;
79 #size-cells = <1>;
80 compatible = "jedec,spi-nor";
81 reg = <0 0>;
82 linux,modalias = "m25p80", "mx25l25635e";
83 spi-max-frequency = <40000000>;
84 m25p,chunked-io = <31>;
85
86 partition@0 {
87 label = "u-boot";
88 reg = <0x0 0x30000>;
89 read-only;
90 };
91
92 partition@30000 {
93 label = "u-boot-env";
94 reg = <0x30000 0x10000>;
95 };
96
97 factory: partition@40000 {
98 label = "factory";
99 reg = <0x40000 0x10000>;
100 read-only;
101 };
102
103 partition@50000 {
104 label = "firmware";
105 reg = <0x50000 0x1fb0000>;
106 };
107 };
108
109 spidev@1 {
110 #address-cells = <1>;
111 #size-cells = <1>;
112 compatible = "spidev";
113 reg = <1 0>;
114 spi-max-frequency = <40000000>;
115 };
116 };
117
118 i2c@900 {
119 status = "okay";
120 };
121
122 uart1@d00 {
123 status = "okay";
124 };
125
126 uart2@e00 {
127 status = "okay";
128 };
129
130 pwm@5000 {
131 status = "okay";
132 };
133 };
134
135 ethernet@10100000 {
136 mtd-mac-address = <&factory 0x28>;
137 };
138
139 sdhci@10130000 {
140 status = "okay";
141 mediatek,cd-high;
142 };
143
144 bootstrap {
145 compatible = "mediatek,linkit";
146
147 status = "okay";
148 };
149
150 gpio-leds {
151 compatible = "gpio-leds";
152
153 wifi {
154 label = "mediatek:orange:wifi";
155 gpios = <&wgpio 0 0>;
156 default-state = "on";
157 };
158 };
159
160 gpio-keys-polled {
161 compatible = "gpio-keys-polled";
162 #address-cells = <1>;
163 #size-cells = <0>;
164 poll-interval = <20>;
165
166 wps {
167 label = "reset";
168 gpios = <&gpio1 6 1>;
169 linux,code = <0x211>;
170 };
171 };
172
173 wgpio: gpio-wifi {
174 compatible = "mediatek,gpio-wifi";
175 #address-cells = <1>;
176 #size-cells = <0>;
177 gpio-controller;
178 #gpio-cells = <2>;
179 };
180
181 };