e77f39843db5417929fbbb38bbc3cfe4e8ef237f
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_bdcom_wap2100-sk.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include "mt7620a.dtsi"
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8
9 / {
10 compatible = "bdcom,wap2100-sk", "ralink,mt7620a-soc";
11 model = "BDCOM WAP2100-SK";
12
13 aliases {
14 led-boot = &led_power;
15 led-failsafe = &led_power;
16 };
17
18 chosen {
19 bootargs = "console=ttyS0,115200";
20 };
21
22 leds {
23 compatible = "gpio-leds";
24
25 usb {
26 label = "wap2100-sk:green:usb";
27 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
28 trigger-sources = <&ohci_port1>, <&ehci_port1>;
29 linux,default-trigger = "usbport";
30 };
31
32 led_power: wps {
33 label = "wap2100-sk:green:wps";
34 gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
35 };
36
37 wlan2g {
38 label = "wap2100-sk:green:wlan2g";
39 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
40 };
41 };
42
43 keys {
44 compatible = "gpio-keys";
45
46 wps {
47 label = "wps";
48 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_WPS_BUTTON>;
50 };
51
52 reset {
53 label = "reset";
54 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
55 linux,code = <KEY_RESTART>;
56 };
57 };
58 };
59
60 &spi0 {
61 status = "okay";
62
63 flash@0 {
64 compatible = "jedec,spi-nor";
65 reg = <0>;
66 spi-max-frequency = <10000000>;
67
68 partitions {
69 compatible = "fixed-partitions";
70 #address-cells = <1>;
71 #size-cells = <1>;
72
73 partition@0 {
74 label = "u-boot";
75 reg = <0x0 0x30000>;
76 read-only;
77 };
78
79 partition@30000 {
80 label = "u-boot-env";
81 reg = <0x30000 0x10000>;
82 read-only;
83 };
84
85 factory: partition@40000 {
86 label = "factory";
87 reg = <0x40000 0x10000>;
88 read-only;
89 };
90
91 partition@50000 {
92 compatible = "denx,uimage";
93 label = "firmware";
94 reg = <0x50000 0xf70000>;
95 };
96 };
97 };
98 };
99
100 &gpio0 {
101 status = "okay";
102 };
103
104 &gpio1 {
105 status = "okay";
106 };
107
108 &gpio3 {
109 status = "okay";
110 };
111
112 &sdhci {
113 status = "okay";
114 };
115
116 &ehci {
117 status = "okay";
118 };
119
120 &ohci {
121 status = "okay";
122 };
123
124 &ethernet {
125 mtd-mac-address = <&factory 0x4>;
126 mediatek,portmap = "llllw";
127 };
128
129 &wmac {
130 ralink,mtd-eeprom = <&factory 0>;
131 };
132
133 &pcie {
134 status = "okay";
135 };
136
137 &pcie0 {
138 wifi@0,0 {
139 reg = <0x0000 0 0 0 0>;
140 mediatek,mtd-eeprom = <&factory 0x8000>;
141 ieee80211-freq-limit = <5000000 6000000>;
142 };
143 };
144
145 &state_default {
146 default {
147 ralink,group = "spi refclk", "uartf", "wled";
148 ralink,function = "gpio";
149 };
150 };