target/linux/ramips/dts/mt7621_buffalo_wsr-1166dhp.dts

   1 #include "mt7621.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "buffalo,wsr-1166dhp", "mediatek,mt7621-soc";
   8         model = "Buffalo WSR-1166DHP";
   9
  10         aliases {
  11                 led-boot = &led_power;
  12                 led-failsafe = &led_power;
  13                 led-running = &led_power;
  14                 led-upgrade = &led_power;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 internet_g {
  21                         label = "green:internet";
  22                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 router_g {
  26                         label = "green:router";
  27                         gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 router_o {
  31                         label = "orange:router";
  32                         gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 internet_o {
  36                         label = "orange:internet";
  37                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 wifi_o {
  41                         label = "orange:wifi";
  42                         gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 led_power: power {
  46                         label = "green:power";
  47                         gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 diag {
  51                         label = "orange:diag";
  52                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 wifi_g {
  56                         label = "green:wifi";
  57                         gpios = <&gpio 48 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60
  61         keys {
  62                 compatible = "gpio-keys";
  63
  64                 power {
  65                         label = "power";
  66                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  67                         linux,code = <KEY_POWER>;
  68                 };
  69
  70                 reset {
  71                         label = "reset";
  72                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  73                         linux,code = <KEY_RESTART>;
  74                 };
  75
  76                 aoss {
  77                         label = "aoss";
  78                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  79                         linux,code = <KEY_WPS_BUTTON>;
  80                 };
  81
  82                 auto {
  83                         label = "mode";
  84                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  85                         linux,code = <BTN_0>;
  86                         linux,input-type = <EV_SW>;
  87                 };
  88
  89                 ap {
  90                         label = "ap";
  91                         gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
  92                         linux,code = <BTN_0>;
  93                         linux,input-type = <EV_SW>;
  94                 };
  95
  96                 router {
  97                         label = "router";
  98                         gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
  99                         linux,code = <BTN_0>;
 100                         linux,input-type = <EV_SW>;
 101                 };
 102         };
 103
 104         gpio_poweroff {
 105                 compatible = "gpio-poweroff";
 106                 gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
 107         };
 108 };
 109
 110 &spi0 {
 111         status = "okay";
 112
 113         flash@0 {
 114                 compatible = "jedec,spi-nor";
 115                 reg = <0>;
 116                 spi-max-frequency = <10000000>;
 117
 118                 partitions {
 119                         compatible = "fixed-partitions";
 120                         #address-cells = <1>;
 121                         #size-cells = <1>;
 122
 123                         partition@0 {
 124                                 label = "u-boot";
 125                                 reg = <0x0 0x30000>;
 126                                 read-only;
 127                         };
 128
 129                         partition@30000 {
 130                                 label = "u-boot-env";
 131                                 reg = <0x30000 0x10000>;
 132                                 read-only;
 133                         };
 134
 135                         factory: partition@40000 {
 136                                 label = "factory";
 137                                 reg = <0x40000 0x10000>;
 138                                 read-only;
 139
 140                                 nvmem-layout {
 141                                         compatible = "fixed-layout";
 142                                         #address-cells = <1>;
 143                                         #size-cells = <1>;
 144
 145                                         eeprom_factory_0: eeprom@0 {
 146                                                 reg = <0x0 0x400>;
 147                                         };
 148
 149                                         eeprom_factory_8000: eeprom@8000 {
 150                                                 reg = <0x8000 0x200>;
 151                                         };
 152                                 };
 153                         };
 154
 155                         partition@50000 {
 156                                 compatible = "openwrt,trx";
 157                                 label = "firmware";
 158                                 reg = <0x50000 0xf90000>;
 159                         };
 160
 161                         partition@fe0000 {
 162                                 label = "board_data";
 163                                 reg = <0xfe0000 0x20000>;
 164                         };
 165                 };
 166         };
 167 };
 168
 169 &gmac1 {
 170         status = "okay";
 171         label = "wan";
 172         phy-handle = <&ethphy4>;
 173 };
 174
 175 &mdio {
 176         ethphy4: ethernet-phy@4 {
 177                 reg = <4>;
 178         };
 179 };
 180
 181 &switch0 {
 182         ports {
 183                 port@0 {
 184                         status = "okay";
 185                         label = "lan1";
 186                 };
 187
 188                 port@1 {
 189                         status = "okay";
 190                         label = "lan2";
 191                 };
 192
 193                 port@2 {
 194                         status = "okay";
 195                         label = "lan3";
 196                 };
 197
 198                 port@3 {
 199                         status = "okay";
 200                         label = "lan4";
 201                 };
 202         };
 203 };
 204
 205 &state_default {
 206         gpio {
 207                 groups = "i2c", "uart2", "uart3", "sdhci";
 208                 function = "gpio";
 209         };
 210 };
 211
 212 &pcie {
 213         status = "okay";
 214 };
 215
 216 &pcie0 {
 217         mt76@0,0 {
 218                 reg = <0x0000 0 0 0 0>;
 219                 nvmem-cells = <&eeprom_factory_8000>;
 220                 nvmem-cell-names = "eeprom";
 221                 ieee80211-freq-limit = <5000000 6000000>;
 222         };
 223 };
 224
 225 &pcie1 {
 226         mt76@0,0 {
 227                 reg = <0x0000 0 0 0 0>;
 228                 nvmem-cells = <&eeprom_factory_0>;
 229                 nvmem-cell-names = "eeprom";
 230         };
 231 };
 232
 233 &xhci {
 234         status = "disabled";
 235 };