target/linux/ramips/dts/mt7621_cudy_wr1300.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/gpio/gpio.h>
   7
   8 / {
   9         compatible = "cudy,wr1300", "mediatek,mt7621-soc";
  10         model = "Cudy WR1300";
  11
  12         aliases {
  13                 led-boot = &led_sys;
  14                 led-failsafe = &led_sys;
  15                 led-running = &led_sys;
  16                 led-upgrade = &led_sys;
  17                 label-mac-device = &gmac0;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200";
  22         };
  23
  24         keys {
  25                 compatible = "gpio-keys";
  26
  27                 reset {
  28                         label = "reset";
  29                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  30                         linux,code = <KEY_RESTART>;
  31                 };
  32
  33                 wps {
  34                         label = "wps";
  35                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  36                         linux,code = <KEY_WPS_BUTTON>;
  37                 };
  38         };
  39
  40         leds {
  41                 compatible = "gpio-leds";
  42
  43                 led_sys: sys {
  44                         label = "green:sys";
  45                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  46                 };
  47
  48                 usb {
  49                         label = "green:usb";
  50                         gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
  51                         trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
  52                         linux,default-trigger = "usbport";
  53                 };
  54
  55                 wps {
  56                         label = "green:wps";
  57                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60 };
  61
  62 &spi0 {
  63         status = "okay";
  64
  65         flash@0 {
  66                 compatible = "jedec,spi-nor";
  67                 reg = <0>;
  68                 spi-max-frequency = <80000000>;
  69                 m25p,fast-read;
  70
  71                 partitions {
  72                         compatible = "fixed-partitions";
  73                         #address-cells = <1>;
  74                         #size-cells = <1>;
  75
  76                         partition@0 {
  77                                 label = "u-boot";
  78                                 reg = <0x0 0x30000>;
  79                                 read-only;
  80                         };
  81
  82                         partition@30000 {
  83                                 label = "u-boot-env";
  84                                 reg = <0x30000 0x10000>;
  85                                 read-only;
  86                         };
  87
  88                         factory: partition@40000 {
  89                                 label = "factory";
  90                                 reg = <0x40000 0x10000>;
  91                                 read-only;
  92                         };
  93
  94                         partition@50000 {
  95                                 compatible = "denx,uimage";
  96                                 label = "firmware";
  97                                 reg = <0x50000 0xf80000>;
  98                         };
  99
 100                         partition@fd0000 {
 101                                 label = "debug";
 102                                 reg = <0xfd0000 0x10000>;
 103                                 read-only;
 104                         };
 105
 106                         partition@fe0000 {
 107                                 label = "backup";
 108                                 reg = <0xfe0000 0x10000>;
 109                                 read-only;
 110                         };
 111
 112                         bdinfo: partition@ff0000 {
 113                                 label = "bdinfo";
 114                                 reg = <0xff0000 0x10000>;
 115                                 read-only;
 116                         };
 117                 };
 118         };
 119 };
 120
 121 &pcie {
 122         status = "okay";
 123 };
 124
 125 &pcie0 {
 126         wifi@0,0 {
 127                 compatible = "pci14c3,7603";
 128                 reg = <0x0000 0 0 0 0>;
 129                 mediatek,mtd-eeprom = <&factory 0x0000>;
 130                 nvmem-cells = <&macaddr_bdinfo_de00>;
 131                 nvmem-cell-names = "mac-address";
 132                 ieee80211-freq-limit = <2400000 2500000>;
 133
 134                 led {
 135                         led-active-low;
 136                 };
 137         };
 138 };
 139
 140 &pcie1 {
 141         wifi@0,0 {
 142                 compatible = "pci14c3,7662";
 143                 reg = <0x0000 0 0 0 0>;
 144                 mediatek,mtd-eeprom = <&factory 0x8000>;
 145                 nvmem-cells = <&macaddr_bdinfo_de00>;
 146                 nvmem-cell-names = "mac-address";
 147                 mac-address-increment = <2>;
 148                 ieee80211-freq-limit = <5000000 6000000>;
 149
 150                 led {
 151                         led-sources = <2>;
 152                         led-active-low;
 153                 };
 154         };
 155 };
 156
 157 &gmac0 {
 158         nvmem-cells = <&macaddr_bdinfo_de00>;
 159         nvmem-cell-names = "mac-address";
 160 };
 161
 162 &switch0 {
 163         ports {
 164                 port@0 {
 165                         status = "okay";
 166                         label = "lan4";
 167                 };
 168
 169                 port@1 {
 170                         status = "okay";
 171                         label = "lan3";
 172                 };
 173
 174                 port@2 {
 175                         status = "okay";
 176                         label = "lan2";
 177                 };
 178
 179                 port@3 {
 180                         status = "okay";
 181                         label = "lan1";
 182                 };
 183
 184                 port@4 {
 185                         status = "okay";
 186                         label = "wan";
 187                         nvmem-cells = <&macaddr_bdinfo_de00>;
 188                         nvmem-cell-names = "mac-address";
 189                         mac-address-increment = <1>;
 190                 };
 191         };
 192 };
 193
 194 &state_default {
 195         gpio {
 196                 groups = "wdt", "i2c", "jtag";
 197                 function = "gpio";
 198         };
 199 };
 200
 201 &bdinfo {
 202         compatible = "nvmem-cells";
 203         #address-cells = <1>;
 204         #size-cells = <1>;
 205
 206         macaddr_bdinfo_de00: macaddr@de00 {
 207                 reg = <0xde00 0x6>;
 208         };
 209 };