target/linux/ramips/dts/mt7621_d-team_newifi-d2.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "d-team,newifi-d2", "mediatek,mt7621-soc";
  10         model = "Newifi-D2";
  11
  12         aliases {
  13                 led-boot = &led_power_blue;
  14                 led-failsafe = &led_power_blue;
  15                 led-running = &led_power_blue;
  16                 led-upgrade = &led_power_blue;
  17                 label-mac-device = &gmac0;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 power-amber {
  28                         label = "newifi-d2:amber:power";
  29                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 led_power_blue: power-blue {
  33                         label = "newifi-d2:blue:power";
  34                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 internet-amber {
  38                         label = "newifi-d2:amber:internet";
  39                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 internet-blue {
  43                         label = "newifi-d2:blue:internet";
  44                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 wlan2g {
  48                         label = "newifi-d2:blue:wlan2g";
  49                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 wlan5g {
  53                         label = "newifi-d2:blue:wlan5g";
  54                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 usb {
  58                         label = "newifi-d2:blue:usb";
  59                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
  60                         trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
  61                         linux,default-trigger = "usbport";
  62                 };
  63         };
  64
  65         keys {
  66                 compatible = "gpio-keys";
  67
  68                 reset {
  69                         label = "reset";
  70                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  71                         linux,code = <KEY_RESTART>;
  72                 };
  73
  74                 wps {
  75                         label = "wps";
  76                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  77                         linux,code = <KEY_WPS_BUTTON>;
  78                 };
  79         };
  80
  81         gpio_export {
  82                 compatible = "gpio-export";
  83                 #size-cells = <0>;
  84
  85                 power_usb3 {
  86                         gpio-export,name = "power_usb3";
  87                         gpio-export,output = <1>;
  88                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  89                 };
  90         };
  91 };
  92
  93 &spi0 {
  94         status = "okay";
  95
  96         m25p80@0 {
  97                 compatible = "jedec,spi-nor";
  98                 reg = <0>;
  99                 spi-max-frequency = <10000000>;
 100                 broken-flash-reset;
 101
 102                 partitions {
 103                         compatible = "fixed-partitions";
 104                         #address-cells = <1>;
 105                         #size-cells = <1>;
 106
 107                         partition@0 {
 108                                 label = "u-boot";
 109                                 reg = <0x0 0x30000>;
 110                                 read-only;
 111                         };
 112
 113                         partition@30000 {
 114                                 label = "u-boot-env";
 115                                 reg = <0x30000 0x10000>;
 116                                 read-only;
 117                         };
 118
 119                         factory: partition@40000 {
 120                                 label = "factory";
 121                                 reg = <0x40000 0x10000>;
 122                                 read-only;
 123                         };
 124
 125                         partition@50000 {
 126                                 compatible = "denx,uimage";
 127                                 label = "firmware";
 128                                 reg = <0x50000 0x1fb0000>;
 129                         };
 130                 };
 131         };
 132 };
 133
 134 &pcie {
 135         status = "okay";
 136 };
 137
 138 &pcie0 {
 139         mt76@0,0 {
 140                 reg = <0x0000 0 0 0 0>;
 141                 mediatek,mtd-eeprom = <&factory 0x8000>;
 142                 ieee80211-freq-limit = <5000000 6000000>;
 143         };
 144 };
 145
 146 &pcie1 {
 147         mt76@0,0 {
 148                 reg = <0x0000 0 0 0 0>;
 149                 mediatek,mtd-eeprom = <&factory 0x0000>;
 150         };
 151 };
 152
 153 &gmac0 {
 154         mtd-mac-address = <&factory 0xe000>;
 155 };
 156
 157 &switch0 {
 158         ports {
 159                 port@0 {
 160                         status = "okay";
 161                         label = "lan4";
 162                 };
 163
 164                 port@1 {
 165                         status = "okay";
 166                         label = "lan3";
 167                 };
 168
 169                 port@2 {
 170                         status = "okay";
 171                         label = "lan2";
 172                 };
 173
 174                 port@3 {
 175                         status = "okay";
 176                         label = "lan1";
 177                 };
 178
 179                 port@4 {
 180                         status = "okay";
 181                         label = "wan";
 182                         mtd-mac-address = <&factory 0xe006>;
 183                 };
 184         };
 185 };
 186
 187 &state_default {
 188         gpio {
 189                 groups = "i2c", "jtag", "uart2", "uart3";
 190                 function = "gpio";
 191         };
 192 };