target/linux/ramips/dts/mt7621_dlink_dir-3060-a1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dir-3060-a1", "mediatek,mt7621-soc";
  10         model = "D-Link DIR-3060 A1";
  11
  12         aliases {
  13                 label-mac-device = &gmac0;
  14                 led-boot = &led_power_orange;
  15                 led-failsafe = &led_power_white;
  16                 led-running = &led_power_white;
  17                 led-upgrade = &led_net_orange;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28
  29                 wps {
  30                         label = "wps";
  31                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  32                         linux,code = <KEY_WPS_BUTTON>;
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38
  39                 led_power_orange: power_orange {
  40                         label = "orange:power";
  41                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 led_power_white: power_white {
  45                         label = "white:power";
  46                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 led_net_orange: net_orange {
  50                         label = "orange:net";
  51                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 net_white {
  55                         label = "white:net";
  56                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  57                 };
  58
  59                 usb2_white {
  60                         label = "white:usb2";
  61                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  62                         trigger-sources = <&ehci_port2>;
  63                         linux,default-trigger = "usbport";
  64                 };
  65
  66                 usb3_white {
  67                         label = "white:usb3";
  68                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  69                         trigger-sources = <&xhci_ehci_port1>;
  70                         linux,default-trigger = "usbport";
  71                 };
  72
  73                 wlan2g {
  74                         label = "white:wlan2g";
  75                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  76                         linux,default-trigger = "phy0radio";
  77                 };
  78
  79                 wlan5glb {
  80                         label = "white:wlan5glb";
  81                         gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
  82                         linux,default-trigger = "phy1radio";
  83                 };
  84
  85                 wlan5ghb {
  86                         label = "white:wlan5ghb";
  87                         gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
  88                         linux,default-trigger = "phy2radio";
  89                 };
  90         };
  91 };
  92
  93 &nand {
  94         status = "okay";
  95
  96         partitions {
  97                 compatible = "fixed-partitions";
  98                 #address-cells = <1>;
  99                 #size-cells = <1>;
 100
 101                 partition@0 {
 102                         label = "Bootloader";
 103                         reg = <0x0 0x80000>;
 104                         read-only;
 105                 };
 106
 107                 partition@80000 {
 108                         label = "config";
 109                         reg = <0x80000 0x80000>;
 110                         read-only;
 111                 };
 112
 113                 factory: partition@100000 {
 114                         label = "factory";
 115                         reg = <0x100000 0x40000>;
 116                         read-only;
 117
 118                         nvmem-layout {
 119                                 compatible = "fixed-layout";
 120                                 #address-cells = <1>;
 121                                 #size-cells = <1>;
 122
 123                                 eeprom_factory_0: eeprom@0 {
 124                                         reg = <0x0 0x4da8>;
 125                                 };
 126
 127                                 eeprom_factory_8000: eeprom@8000 {
 128                                         reg = <0x8000 0x4da8>;
 129                                 };
 130
 131                                 macaddr_factory_e000: macaddr@e000 {
 132                                         compatible = "mac-base";
 133                                         reg = <0xe000 0x6>;
 134                                         #nvmem-cell-cells = <1>;
 135                                 };
 136
 137                                 macaddr_factory_e006: macaddr@e006 {
 138                                         reg = <0xe006 0x6>;
 139                                 };
 140                         };
 141                 };
 142
 143                 partition@140000 {
 144                         label = "config2";
 145                         reg = <0x140000 0x40000>;
 146                         read-only;
 147                 };
 148
 149                 partition@180000 {
 150                         label = "firmware";
 151                         compatible = "openwrt,uimage", "denx,uimage";
 152                         openwrt,padding = <96>;
 153                         reg = <0x180000 0x2800000>;
 154                 };
 155
 156                 partition@2980000 {
 157                         label = "private";
 158                         reg = <0x2980000 0x2000000>;
 159                         read-only;
 160                 };
 161
 162                 partition@4980000 {
 163                         label = "firmware2";
 164                         reg = <0x4980000 0x2800000>;
 165                         read-only;
 166                 };
 167
 168                 partition@7180000 {
 169                         label = "mydlink";
 170                         reg = <0x7180000 0x600000>;
 171                         read-only;
 172                 };
 173
 174                 partition@7780000 {
 175                         label = "reserved";
 176                         reg = <0x7780000 0x880000>;
 177                         read-only;
 178                 };
 179         };
 180 };
 181
 182 &pcie {
 183         status = "okay";
 184 };
 185
 186 &pcie0 {
 187         wifi0: wifi@0,0 {
 188                 compatible = "mediatek,mt76";
 189                 reg = <0x0000 0 0 0 0>;
 190                 ieee80211-freq-limit = <2400000 6000000>;
 191                 nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_e000 1>;
 192                 nvmem-cell-names = "eeprom", "mac-address";
 193         };
 194 };
 195
 196 &pcie1 {
 197         wifi1: wifi@0,0 {
 198                 compatible = "mediatek,mt76";
 199                 reg = <0x0000 0 0 0 0>;
 200                 ieee80211-freq-limit = <5000000 6000000>;
 201                 nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_e000 3>;
 202                 nvmem-cell-names = "eeprom", "mac-address";
 203         };
 204 };
 205
 206 &gmac0 {
 207         nvmem-cells = <&macaddr_factory_e000 0>;
 208         nvmem-cell-names = "mac-address";
 209 };
 210
 211 &switch0 {
 212         ports {
 213                 port@0 {
 214                         status = "okay";
 215                         label = "lan4";
 216                 };
 217
 218                 port@1 {
 219                         status = "okay";
 220                         label = "lan3";
 221                 };
 222
 223                 port@2 {
 224                         status = "okay";
 225                         label = "lan2";
 226                 };
 227
 228                 port@3 {
 229                         status = "okay";
 230                         label = "lan1";
 231                 };
 232
 233                 port@4 {
 234                         status = "okay";
 235                         label = "wan";
 236                         nvmem-cells = <&macaddr_factory_e006>;
 237                         nvmem-cell-names = "mac-address";
 238                 };
 239         };
 240 };
 241
 242 &state_default {
 243         gpio {
 244                 groups = "i2c", "uart3", "jtag", "wdt";
 245                 function = "gpio";
 246         };
 247 };