target/linux/ramips/dts/mt7621_iodata_wnpr2600g.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/leds/common.h>
   8
   9 / {
  10         compatible = "iodata,wnpr2600g", "mediatek,mt7621-soc";
  11         model = "I-O DATA WNPR2600G";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_power: power {
  24                         function = LED_FUNCTION_POWER;
  25                         color = <LED_COLOR_ID_GREEN>;
  26                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  27                         default-state = "on";
  28                 };
  29
  30                 notification {
  31                         label = "green:notification";
  32                         gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
  33                 };
  34
  35                 wlan2g {
  36                         label = "green:wlan2g";
  37                         gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
  38                         linux,default-trigger = "phy0radio";
  39                 };
  40
  41                 wlan5g {
  42                         label = "green:wlan5g";
  43                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  44                         linux,default-trigger = "phy1radio";
  45                 };
  46         };
  47
  48         keys {
  49                 compatible = "gpio-keys";
  50
  51                 auto {
  52                         label = "auto";
  53                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  54                         linux,code = <BTN_0>;
  55                         linux,input-type = <EV_SW>;
  56                 };
  57
  58                 reset {
  59                         label = "reset";
  60                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  61                         linux,code = <KEY_RESTART>;
  62                 };
  63
  64                 wps {
  65                         label = "wps";
  66                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  67                         linux,code = <KEY_WPS_BUTTON>;
  68                 };
  69         };
  70 };
  71
  72 &spi0 {
  73         status = "okay";
  74
  75         flash@0 {
  76                 compatible = "jedec,spi-nor";
  77                 reg = <0>;
  78                 spi-max-frequency = <40000000>;
  79
  80                 partitions {
  81                         compatible = "fixed-partitions";
  82                         #address-cells = <1>;
  83                         #size-cells = <1>;
  84
  85                         partition@0 {
  86                                 label = "u-boot";
  87                                 reg = <0x000000 0x030000>;
  88                                 read-only;
  89                         };
  90
  91                         partition@30000 {
  92                                 label = "u-boot-env";
  93                                 reg = <0x030000 0x010000>;
  94                                 read-only;
  95                         };
  96
  97                         partition@40000 {
  98                                 label = "factory";
  99                                 reg = <0x040000 0x010000>;
 100                                 read-only;
 101
 102                                 nvmem-layout {
 103                                         compatible = "fixed-layout";
 104                                         #address-cells = <1>;
 105                                         #size-cells = <1>;
 106
 107                                         eeprom_factory_0: eeprom@0 {
 108                                                 reg = <0x0 0x4da8>;
 109                                         };
 110
 111                                         eeprom_factory_8000: eeprom@8000 {
 112                                                 reg = <0x8000 0x4da8>;
 113                                         };
 114
 115                                         macaddr_factory_4: macaddr@4 {
 116                                                 reg = <0x4 0x6>;
 117                                         };
 118                                 };
 119                         };
 120
 121                         partition@50000 {
 122                                 compatible = "denx,uimage";
 123                                 label = "firmware";
 124                                 reg = <0x050000 0xda0000>;
 125                         };
 126
 127                         partition@df0000 {
 128                                 label = "manufacture";
 129                                 reg = <0xdf0000 0x190000>;
 130                                 read-only;
 131                         };
 132
 133                         partition@f80000 {
 134                                 label = "storage";
 135                                 reg = <0xf80000 0x080000>;
 136                                 read-only;
 137                         };
 138                 };
 139         };
 140 };
 141
 142 &gmac0 {
 143         nvmem-cells = <&macaddr_factory_4>;
 144         nvmem-cell-names = "mac-address";
 145 };
 146
 147 &gmac1 {
 148         status = "okay";
 149         label = "wan";
 150         phy-handle = <&ethphy0>;
 151
 152         nvmem-cells = <&macaddr_factory_4>;
 153         nvmem-cell-names = "mac-address";
 154 };
 155
 156 &mdio {
 157         ethphy0: ethernet-phy@0 {
 158                 reg = <0>;
 159         };
 160 };
 161
 162 &switch0 {
 163         ports {
 164                 port@1 {
 165                         status = "okay";
 166                         label = "lan4";
 167                 };
 168
 169                 port@2 {
 170                         status = "okay";
 171                         label = "lan3";
 172                 };
 173
 174                 port@3 {
 175                         status = "okay";
 176                         label = "lan2";
 177                 };
 178
 179                 port@4 {
 180                         status = "okay";
 181                         label = "lan1";
 182                 };
 183         };
 184 };
 185
 186 &state_default {
 187         gpio {
 188                 groups = "uart2", "uart3", "jtag", "wdt";
 189                 function = "gpio";
 190         };
 191 };
 192
 193 &pcie {
 194         status = "okay";
 195 };
 196
 197 &pcie0 {
 198         wifi@0,0 {
 199                 compatible = "mediatek,mt76";
 200                 reg = <0x0000 0 0 0 0>;
 201                 nvmem-cells = <&eeprom_factory_0>;
 202                 nvmem-cell-names = "eeprom";
 203                 ieee80211-freq-limit = <2400000 2500000>;
 204         };
 205 };
 206
 207 &pcie1 {
 208         wifi@0,0 {
 209                 compatible = "mediatek,mt76";
 210                 reg = <0x0000 0 0 0 0>;
 211                 nvmem-cells = <&eeprom_factory_8000>;
 212                 nvmem-cell-names = "eeprom";
 213                 ieee80211-freq-limit = <5000000 6000000>;
 214         };
 215 };
 216
 217 &xhci {
 218         status = "disabled";
 219 };