target/linux/ramips/dts/mt7621_oraybox_x3a.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "oraybox,x3a", "mediatek,mt7621-soc";
  10         model = "OrayBox X3A";
  11
  12         aliases {
  13                 led-boot = &led_status_green;
  14                 led-failsafe = &led_status_red;
  15                 led-running = &led_status_blue;
  16                 led-upgrade = &led_status_green;
  17                 label-mac-device = &gmac0;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 led_status_red: status-red {
  28                         label = "red:status";
  29                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 led_status_blue: status-blue {
  33                         label = "blue:status";
  34                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 led_status_green: status-green {
  38                         label = "green:status";
  39                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  40                 };
  41         };
  42
  43         keys {
  44                 compatible = "gpio-keys";
  45
  46                 reset {
  47                         label = "reset";
  48                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  49                         linux,code = <KEY_RESTART>;
  50                 };
  51         };
  52 };
  53
  54 &spi0 {
  55         status = "okay";
  56
  57         flash@0 {
  58                 compatible = "jedec,spi-nor";
  59                 reg = <0>;
  60                 spi-max-frequency = <30000000>;
  61
  62                 partitions {
  63                         compatible = "fixed-partitions";
  64                         #address-cells = <1>;
  65                         #size-cells = <1>;
  66
  67                         partition@0 {
  68                                 label = "u-boot";
  69                                 reg = <0x0 0x30000>;
  70                                 read-only;
  71                         };
  72
  73                         partition@30000 {
  74                                 label = "u-boot-env";
  75                                 reg = <0x30000 0x10000>;
  76                                 read-only;
  77                         };
  78
  79                         factory: partition@40000 {
  80                                 label = "factory";
  81                                 reg = <0x40000 0x10000>;
  82                                 read-only;
  83                         };
  84
  85                         partition@50000 {
  86                                 compatible = "denx,uimage";
  87                                 label = "firmware";
  88                                 reg = <0x50000 0xf00000>;
  89                         };
  90
  91                         partition@fe0000 {
  92                                 label = "bdinfo";
  93                                 reg = <0xfe0000 0x10000>;
  94                                 read-only;
  95
  96                                 compatible = "nvmem-cells";
  97                                 #address-cells = <1>;
  98                                 #size-cells = <1>;
  99
 100                                 macaddr_bdinfo_9: macaddr@9 {
 101                                         reg = <0x9 0x6>;
 102                                 };
 103                         };
 104
 105                         partition@ff0000 {
 106                                 label = "reserve";
 107                                 reg = <0xff0000 0x10000>;
 108                                 read-only;
 109                         };
 110                 };
 111         };
 112 };
 113
 114 &pcie {
 115         status = "okay";
 116 };
 117
 118 &pcie0 {
 119         wifi@0,0 {
 120                 compatible = "mediatek,mt76";
 121                 reg = <0x0000 0 0 0 0>;
 122                 mediatek,mtd-eeprom = <&factory 0x0>;
 123         };
 124 };
 125
 126 &gmac0 {
 127         nvmem-cells = <&macaddr_bdinfo_9>;
 128         nvmem-cell-names = "mac-address";
 129 };
 130
 131 &switch0 {
 132         ports {
 133                 port@2 {
 134                         status = "okay";
 135                         label = "lan2";
 136                 };
 137
 138                 port@3 {
 139                         status = "okay";
 140                         label = "lan1";
 141                 };
 142
 143                 port@4 {
 144                         status = "okay";
 145                         label = "wan";
 146                         nvmem-cells = <&macaddr_bdinfo_9>;
 147                         nvmem-cell-names = "mac-address";
 148                         mac-address-increment = <1>;
 149                 };
 150         };
 151 };
 152
 153 &state_default {
 154         gpio {
 155                 groups = "jtag", "wdt";
 156                 function = "gpio";
 157         };
 158 };