target/linux/ramips/dts/mt7621_xiaoyu_xy-c5.dts

   1 #include "mt7621.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "xiaoyu,xy-c5", "mediatek,mt7621-soc";
   8         model = "XiaoYu XY-C5";
   9
  10         aliases {
  11                 led-boot = &led_sys;
  12                 led-failsafe = &led_sys;
  13                 led-running = &led_sys;
  14                 led-upgrade = &led_sys;
  15                 label-mac-device = &gmac0;
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20
  21                 work {
  22                         label = "xy-c5:green:work";
  23                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  24                 };
  25
  26                 led_sys: sys {
  27                         label = "xy-c5:green:sys";
  28                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  29                 };
  30         };
  31
  32         keys {
  33                 compatible = "gpio-keys";
  34
  35                 reset {
  36                         label = "reset";
  37                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_RESTART>;
  39                 };
  40         };
  41 };
  42
  43 &spi0 {
  44         status = "okay";
  45
  46         flash@0 {
  47                 compatible = "jedec,spi-nor";
  48                 reg = <0>;
  49                 spi-max-frequency = <25000000>;
  50
  51                 partitions {
  52                         compatible = "fixed-partitions";
  53                         #address-cells = <1>;
  54                         #size-cells = <1>;
  55
  56                         partition@0 {
  57                                 label = "u-boot";
  58                                 reg = <0x0 0x30000>;
  59                                 read-only;
  60                         };
  61
  62                         partition@30000 {
  63                                 label = "u-boot-env";
  64                                 reg = <0x30000 0x10000>;
  65                                 read-only;
  66                         };
  67
  68                         factory: partition@40000 {
  69                                 label = "factory";
  70                                 reg = <0x40000 0x10000>;
  71                                 read-only;
  72                         };
  73
  74                         partition@50000 {
  75                                 compatible = "denx,uimage";
  76                                 label = "firmware";
  77                                 reg = <0x50000 0x1fb0000>;
  78                         };
  79                 };
  80         };
  81 };
  82
  83 &pcie {
  84         status = "okay";
  85 };
  86
  87 &gmac0 {
  88         mtd-mac-address = <&factory 0x4>;
  89 };
  90
  91 &switch0 {
  92         ports {
  93                 port@0 {
  94                         status = "okay";
  95                         label = "lan1";
  96                 };
  97
  98                 port@1 {
  99                         status = "okay";
 100                         label = "lan2";
 101                 };
 102
 103                 port@2 {
 104                         status = "okay";
 105                         label = "lan3";
 106                 };
 107
 108                 port@3 {
 109                         status = "okay";
 110                         label = "lan4";
 111                 };
 112
 113                 port@4 {
 114                         status = "okay";
 115                         label = "wan";
 116                         mtd-mac-address = <&factory 0x4>;
 117                         mtd-mac-address-increment = <1>;
 118                 };
 119         };
 120 };
 121
 122 &state_default {
 123         gpio {
 124                 groups = "uart3", "wdt";
 125                 function = "gpio";
 126         };
 127 };