target/linux/ramips/dts/mt7628an_oraybox_x1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "oraybox,x1", "mediatek,mt7628an-soc";
  10         model = "OrayBox X1";
  11
  12         aliases {
  13                 led-boot = &led_status_white;
  14                 led-failsafe = &led_status_red;
  15                 led-running = &led_status_white;
  16                 led-upgrade = &led_status_red;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 led_status_blue: status-blue {
  27                         label = "blue:status";
  28                         gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
  29                 };
  30
  31                 led_status_red: status-red {
  32                         label = "red:status";
  33                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  34                 };
  35
  36                 led_status_white: status-white {
  37                         label = "white:status";
  38                         gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
  39                 };
  40         };
  41
  42         keys {
  43                 compatible = "gpio-keys";
  44
  45                 reset {
  46                         label = "reset";
  47                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  48                         linux,code = <KEY_RESTART>;
  49                 };
  50         };
  51 };
  52
  53 &spi0 {
  54         status = "okay";
  55
  56         flash@0 {
  57                 compatible = "jedec,spi-nor";
  58                 reg = <0>;
  59                 spi-max-frequency = <40000000>;
  60
  61                 partitions {
  62                         compatible = "fixed-partitions";
  63                         #address-cells = <1>;
  64                         #size-cells = <1>;
  65
  66                         partition@0 {
  67                                 label = "u-boot";
  68                                 reg = <0x0 0x30000>;
  69                                 read-only;
  70                         };
  71
  72                         partition@30000 {
  73                                 label = "kpanic";
  74                                 reg = <0x30000 0x10000>;
  75                                 read-only;
  76                         };
  77
  78                         partition@40000 {
  79                                 label = "factory";
  80                                 reg = <0x40000 0x10000>;
  81                                 read-only;
  82                         };
  83
  84                         partition@50000 {
  85                                 compatible = "denx,uimage";
  86                                 label = "firmware";
  87                                 reg = <0x50000 0xf00000>;
  88                         };
  89
  90                         bdinfo: partition@fe0000 {
  91                                 label = "bdinfo";
  92                                 reg = <0xfe0000 0x10000>;
  93                                 read-only;
  94
  95                                 nvmem-layout {
  96                                         compatible = "fixed-layout";
  97                                         #address-cells = <1>;
  98                                         #size-cells = <1>;
  99
 100                                         macaddr_bdinfo_9: macaddr@9 {
 101                                                 reg = <0x9 0x6>;
 102                                         };
 103                                 };
 104                         };
 105
 106                         partition@ff0000 {
 107                                 label = "reserve";
 108                                 reg = <0xff0000 0x10000>;
 109                                 read-only;
 110                         };
 111                 };
 112         };
 113 };
 114
 115 &state_default {
 116         gpio {
 117                 groups = "jtag", "wdt";
 118                 function = "gpio";
 119         };
 120 };
 121
 122 &ethernet {
 123         nvmem-cells = <&macaddr_bdinfo_9>;
 124         nvmem-cell-names = "mac-address";
 125 };
 126
 127 &wmac {
 128         status = "okay";
 129 };