ramips: replace pinctrl property names
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7628an_tplink_archer-c20-v5.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include "mt7628an_tplink_8m-split-uboot.dtsi"
5
6 / {
7 compatible = "tplink,archer-c20-v5", "mediatek,mt7628an-soc";
8 model = "TP-Link Archer C20 v5";
9
10 aliases {
11 led-boot = &led_power;
12 led-failsafe = &led_power;
13 led-running = &led_power;
14 led-upgrade = &led_power;
15 };
16
17 keys {
18 compatible = "gpio-keys";
19
20 reset {
21 label = "reset";
22 gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
23 linux,code = <KEY_RESTART>;
24 };
25
26 rfkill {
27 label = "rfkill";
28 gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
29 linux,code = <KEY_RFKILL>;
30 };
31 };
32
33 leds {
34 compatible = "gpio-leds";
35
36 led_power: power {
37 label = "archer-c20-v5:green:power";
38 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
39 };
40
41 wlan2g {
42 label = "archer-c20-v5:green:wlan2g";
43 gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
44 linux,default-trigger = "phy0tpt";
45 };
46
47 wlan5g {
48 label = "archer-c20-v5:green:wlan5g";
49 gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
50 linux,default-trigger = "phy1tpt";
51 };
52
53 lan {
54 label = "archer-c20-v5:green:lan";
55 gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
56 };
57
58 wan_green {
59 label = "archer-c20-v5:green:wan";
60 gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
61 };
62
63 wan_orange {
64 label = "archer-c20-v5:orange:wan";
65 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
66 };
67
68 wps {
69 label = "archer-c20-v5:green:wps";
70 gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
71 };
72 };
73 };
74
75 &state_default {
76 gpio {
77 groups = "i2s", "gpio", "refclk", "p0led_an", "p1led_an",
78 "p2led_an", "p3led_an", "p4led_an", "wdt";
79 function = "gpio";
80 };
81 };
82
83 &pcie {
84 status = "okay";
85 };
86
87 &pcie0 {
88 wifi@0,0 {
89 reg = <0x0000 0 0 0 0>;
90 mediatek,mtd-eeprom = <&radio 0x8000>;
91 ieee80211-freq-limit = <5000000 6000000>;
92 mtd-mac-address = <&rom 0xf100>;
93 mtd-mac-address-increment = <(-1)>;
94 };
95 };