target/linux/ramips/dts/rt3052_planex_mzk-w300nh2.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5 #include <dt-bindings/leds/common.h>
   6
   7 / {
   8         compatible = "planex,mzk-w300nh2", "ralink,rt3052-soc";
   9         model = "Planex MZK-W300NH2";
  10
  11         aliases {
  12                 led-boot = &led_power;
  13                 led-failsafe = &led_power;
  14                 led-running = &led_power;
  15                 led-upgrade = &led_power;
  16         };
  17
  18         flash@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21                 bank-width = <2>;
  22                 device-width = <2>;
  23
  24                 partitions {
  25                         compatible = "fixed-partitions";
  26                         #address-cells = <1>;
  27                         #size-cells = <1>;
  28
  29                         partition@0 {
  30                                 label = "u-boot";
  31                                 reg = <0x0 0x30000>;
  32                                 read-only;
  33                         };
  34
  35                         partition@30000 {
  36                                 label = "u-boot-env";
  37                                 reg = <0x30000 0x10000>;
  38                                 read-only;
  39                         };
  40
  41                         partition@40000 {
  42                                 label = "factory";
  43                                 reg = <0x40000 0x10000>;
  44                                 read-only;
  45
  46                                 nvmem-layout {
  47                                         compatible = "fixed-layout";
  48                                         #address-cells = <1>;
  49                                         #size-cells = <1>;
  50
  51                                         eeprom_factory_0: eeprom@0 {
  52                                                 reg = <0x0 0x200>;
  53                                         };
  54
  55                                         macaddr_factory_4: macaddr@4 {
  56                                                 reg = <0x4 0x6>;
  57                                         };
  58                                 };
  59                         };
  60
  61                         partition@3e0000 {
  62                                 label = "cimage";
  63                                 reg = <0x3e0000 0x20000>;
  64                                 read-only;
  65                         };
  66
  67                         partition@50000 {
  68                                 compatible = "denx,uimage";
  69                                 label = "firmware";
  70                                 reg = <0x50000 0x390000>;
  71                         };
  72                 };
  73         };
  74
  75         leds {
  76                 compatible = "gpio-leds";
  77
  78                 led_power: power {
  79                         function = LED_FUNCTION_POWER;
  80                         color = <LED_COLOR_ID_GREEN>;
  81                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  82                 };
  83
  84                 wlan {
  85                         function = LED_FUNCTION_WLAN;
  86                         color = <LED_COLOR_ID_AMBER>;
  87                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  88                 };
  89
  90                 wps {
  91                         function = LED_FUNCTION_WPS;
  92                         color = <LED_COLOR_ID_AMBER>;
  93                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  94                 };
  95         };
  96
  97         keys {
  98                 compatible = "gpio-keys-polled";
  99                 poll-interval = <20>;
 100
 101                 wps {
 102                         label = "wps";
 103                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 104                         linux,code = <KEY_WPS_BUTTON>;
 105                 };
 106
 107                 reset {
 108                         label = "reset";
 109                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
 110                         linux,code = <KEY_RESTART>;
 111                 };
 112
 113                 rt {
 114                         label = "rt";
 115                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 116                         linux,code = <BTN_0>;
 117                 };
 118         };
 119 };
 120
 121 &state_default {
 122         gpio {
 123                 groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 124                 function = "gpio";
 125         };
 126 };
 127
 128 &ethernet {
 129         nvmem-cells = <&macaddr_factory_4>;
 130         nvmem-cell-names = "mac-address";
 131 };
 132
 133 &esw {
 134         mediatek,portmap = <0x2f>;
 135 };
 136
 137 &wmac {
 138         nvmem-cells = <&eeprom_factory_0>;
 139         nvmem-cell-names = "eeprom";
 140 };