target/linux/ramips/dts/rt5350_hootoo_ht-tm02.dts

   1 #include "rt5350.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "hootoo,ht-tm02", "ralink,rt5350-soc";
   8         model = "HooToo HT-TM02";
   9
  10         aliases {
  11                 led-boot = &led_wlan;
  12                 led-failsafe = &led_wlan;
  13                 led-running = &led_wlan;
  14                 led-upgrade = &led_wlan;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_wlan: wlan {
  21                         label = "blue:wlan";
  22                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 lan {
  26                         label = "green:lan";
  27                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  28                 };
  29         };
  30
  31         keys {
  32                 compatible = "gpio-keys-polled";
  33                 poll-interval = <20>;
  34
  35                 reset {
  36                         label = "reset";
  37                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_RESTART>;
  39                 };
  40
  41                 modeswitch {
  42                         label = "modeswitch";
  43                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  44                         linux,code = <BTN_0>;
  45                         linux,input-type = <EV_SW>;
  46                 };
  47         };
  48 };
  49
  50 &spi0 {
  51         status = "okay";
  52
  53         flash@0 {
  54                 compatible = "jedec,spi-nor";
  55                 reg = <0>;
  56                 spi-max-frequency = <10000000>;
  57
  58                 partitions {
  59                         compatible = "fixed-partitions";
  60                         #address-cells = <1>;
  61                         #size-cells = <1>;
  62
  63                         partition@0 {
  64                                 label = "u-boot";
  65                                 reg = <0x0 0x30000>;
  66                                 read-only;
  67                         };
  68
  69                         partition@30000 {
  70                                 label = "u-boot-env";
  71                                 reg = <0x30000 0x10000>;
  72                                 read-only;
  73                         };
  74
  75                         factory: partition@40000 {
  76                                 label = "factory";
  77                                 reg = <0x40000 0x10000>;
  78                                 read-only;
  79
  80                                 nvmem-layout {
  81                                         compatible = "fixed-layout";
  82                                         #address-cells = <1>;
  83                                         #size-cells = <1>;
  84
  85                                         eeprom_factory_0: eeprom@0 {
  86                                                 reg = <0x0 0x200>;
  87                                         };
  88
  89                                         macaddr_factory_28: macaddr@28 {
  90                                                 reg = <0x28 0x6>;
  91                                         };
  92                                 };
  93                         };
  94
  95                         partition@50000 {
  96                                 compatible = "denx,uimage";
  97                                 label = "firmware";
  98                                 reg = <0x50000 0x7b0000>;
  99                         };
 100                 };
 101         };
 102 };
 103
 104 &state_default {
 105         gpio {
 106                 groups = "i2c", "jtag", "uartf";
 107                 function = "gpio";
 108         };
 109 };
 110
 111 &ethernet {
 112         nvmem-cells = <&macaddr_factory_28>;
 113         nvmem-cell-names = "mac-address";
 114 };
 115
 116 &esw {
 117         mediatek,portmap = <0x10>;
 118         mediatek,portdisable = <0x2f>;
 119 };
 120
 121 &wmac {
 122         nvmem-cells = <&eeprom_factory_0>;
 123         nvmem-cell-names = "eeprom";
 124 };