-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "ZyXEL NBG6617";
- compatible = "zyxel,nbg6617", "qcom,ipq4019";
-
- chosen {
- /*
- * the vendor u-boot adds root and mtdparts cmdline parameters
- * which we don't want... but we have to overwrite them or else
- * the kernel will take them at face value.
- */
- bootargs-append = " mtdparts= root=31:13";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- soc {
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
-
- dwc3@6000000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb2_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- usb3_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wlan {
- label = "wlan";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RFKILL>;
- linux,input-type = <EV_SW>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- power: power {
- label = "nbg6617:green:power";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- usb {
- label = "nbg6617:green:usb";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
- linux,default-trigger = "usbport";
- };
-
- wlan2G {
- label = "nbg6617:green:wlan2G";
- gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5G {
- label = "nbg6617:green:wlan5G";
- gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "nbg6617:green:wps";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
- spi_0_pins: spi_0_pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- mux_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-low;
- };
- };
- led_pins: led_pinmux {
- mux {
- pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
- drive-strength = <0x8>;
- bias-disable;
- output-low;
- };
- };
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- mx25l25635f@0 {
- compatible = "mx25l25635f", "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- spi-max-frequency = <24000000>;
- status = "okay";
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "APPSBL"; /* u-boot */
- reg = <0x000e0000 0x00080000>;
- /* U-Boot Standalone App "zloader" is located at 0x64000 */
- read-only;
- };
- partition6@160000 {
- label = "APPSBLENV"; /* u-boot env */
- reg = <0x00160000 0x00010000>;
- };
- partition7@170000 {
- /* make a backup of this partition! */
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- partition8@180000 {
- label = "kernel";
- reg = <0x00180000 0x00400000>;
- };
- partition9@580000 {
- label = "dualflag";
- reg = <0x00580000 0x00010000>;
- read-only;
- };
- partition10@590000 {
- label = "header";
- reg = <0x00590000 0x00010000>;
- };
- partition11@5a0000 {
- label = "romd";
- reg = <0x005a0000 0x00100000>;
- read-only;
- };
- partition12@6a0000 {
- label = "not_root_data";
- /*
- * for some strange reason, someone at ZyXEL
- * had the "great" idea to put the rootfs_data
- * in front of rootfs... Don't do that!
- * As a result this one, full MebiByte remains
- * unused.
- */
- reg = <0x006a0000 0x00100000>;
- };
- partition13@7a0000 {
- label = "rootfs";
- reg = <0x007a0000 0x01860000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
projects / openwrt / openwrt.git / blobdiff