config BUSYBOX_DEFAULT_FEATURE_SYSLOG
bool
default y
-config BUSYBOX_DEFAULT_PLATFORM_LINUX
- bool
- default y
config BUSYBOX_DEFAULT_STATIC
bool
default n
config BUSYBOX_DEFAULT_STACK_OPTIMIZATION_386
bool
default n
+config BUSYBOX_DEFAULT_STATIC_LIBGCC
+ bool
+ default n
config BUSYBOX_DEFAULT_INSTALL_APPLET_SYMLINKS
bool
default y
config BUSYBOX_DEFAULT_WERROR
bool
default n
+config BUSYBOX_DEFAULT_WARN_SIMPLE_MSG
+ bool
+ default n
config BUSYBOX_DEFAULT_NO_DEBUG_LIB
bool
default y
config BUSYBOX_DEFAULT_UUDECODE
bool
default n
+config BUSYBOX_DEFAULT_BASE32
+ bool
+ default n
config BUSYBOX_DEFAULT_BASE64
bool
default n
config BUSYBOX_DEFAULT_FEATURE_FIND_DELETE
bool
default n
+config BUSYBOX_DEFAULT_FEATURE_FIND_EMPTY
+ bool
+ default n
config BUSYBOX_DEFAULT_FEATURE_FIND_PATH
bool
default y
config BUSYBOX_DEFAULT_HEXDUMP
bool
default y
-config BUSYBOX_DEFAULT_FEATURE_HEXDUMP_REVERSE
- bool
- default n
config BUSYBOX_DEFAULT_HD
bool
default n
config BUSYBOX_DEFAULT_FEATURE_TASKSET_FANCY
bool
default n
+config BUSYBOX_DEFAULT_FEATURE_TASKSET_CPULIST
+ bool
+ default n
config BUSYBOX_DEFAULT_UEVENT
bool
default n
config BUSYBOX_DEFAULT_FEATURE_VOLUMEID_CRAMFS
bool
default n
+config BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EROFS
+ bool
+ default n
config BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EXFAT
bool
default n
config BUSYBOX_DEFAULT_MICROCOM
bool
default n
+config BUSYBOX_DEFAULT_MIM
+ bool
+ default n
config BUSYBOX_DEFAULT_MT
bool
default n
config BUSYBOX_DEFAULT_FEATURE_HTTPD_GZIP
bool
default n
+config BUSYBOX_DEFAULT_FEATURE_HTTPD_ETAG
+ bool
+ default n
+config BUSYBOX_DEFAULT_FEATURE_HTTPD_LAST_MODIFIED
+ bool
+ default n
+config BUSYBOX_DEFAULT_FEATURE_HTTPD_DATE
+ bool
+ default n
+config BUSYBOX_DEFAULT_FEATURE_HTTPD_ACL_IP
+ bool
+ default n
config BUSYBOX_DEFAULT_IFCONFIG
bool
default y
config BUSYBOX_DEFAULT_BASH_IS_NONE
bool
default y
+config BUSYBOX_DEFAULT_SHELL_ASH
+ bool
+ default y
config BUSYBOX_DEFAULT_ASH
bool
default y
config BUSYBOX_DEFAULT_HUSH
bool
default n
+config BUSYBOX_DEFAULT_SHELL_HUSH
+ bool
+ default n
config BUSYBOX_DEFAULT_HUSH_BASH_COMPAT
bool
default n
config BUSYBOX_DEFAULT_FEATURE_SYSLOGD_CFG
bool
default n
+config BUSYBOX_DEFAULT_FEATURE_SYSLOGD_PRECISE_TIMESTAMPS
+ bool
+ default n
config BUSYBOX_DEFAULT_FEATURE_SYSLOGD_READ_BUFFER_SIZE
int
default 0
include $(TOPDIR)/rules.mk
PKG_NAME:=busybox
-PKG_VERSION:=1.31.1
-PKG_RELEASE:=9
+PKG_VERSION:=1.33.0
+PKG_RELEASE:=1
PKG_FLAGS:=essential
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:=https://www.busybox.net/downloads \
http://sources.buildroot.net
-PKG_HASH:=d0f940a72f648943c1f2211e0e3117387c31d765137d92bd8284a3fb9752a998
+PKG_HASH:=d568681c91a85edc6710770cebc1e80e042ad74d305b5c2e6d57a5f3de3b8fbd
PKG_BUILD_DEPENDS:=BUSYBOX_CONFIG_PAM:libpam
PKG_BUILD_PARALLEL:=1
config BUSYBOX_CONFIG_PID_FILE_PATH
string "Directory for pidfiles"
default BUSYBOX_DEFAULT_PID_FILE_PATH
- depends on BUSYBOX_CONFIG_FEATURE_PIDFILE
+ depends on BUSYBOX_CONFIG_FEATURE_PIDFILE || BUSYBOX_CONFIG_FEATURE_CROND_SPECIAL_TIMES
help
This is the default path where pidfiles are created. Applets which
allow you to set the pidfile path on the command line will override
this value. The option has no effect on applets that require you to
- specify a pidfile path.
+ specify a pidfile path. When crond has the 'Support special times'
+ option enabled, the 'crond.reboot' file is also stored here.
config BUSYBOX_CONFIG_BUSYBOX
bool "Include busybox applet"
config BUSYBOX_CONFIG_SELINUX
bool "Support NSA Security Enhanced Linux"
default BUSYBOX_DEFAULT_SELINUX
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Enable support for SELinux in applets ls, ps, and id. Also provide
the option of compiling in SELinux applets.
#This option is auto-selected when you select any applet which may
#send its output to syslog. You do not need to select it manually.
-config BUSYBOX_CONFIG_PLATFORM_LINUX
- bool #No description makes it a hidden option
- default BUSYBOX_DEFAULT_PLATFORM_LINUX
- #help
- #For the most part, busybox requires only POSIX compatibility
- #from the target system, but some applets and features use
- #Linux-specific interfaces.
- #
- #This is automatically selected if any applet or feature requires
- #Linux-specific interfaces. You do not need to select it manually.
-
comment 'Build Options'
config BUSYBOX_CONFIG_STATIC
do not work with it (they use SSE instructions without
ensuring stack alignment).
+config BUSYBOX_CONFIG_STATIC_LIBGCC
+ bool "Use -static-libgcc"
+ default BUSYBOX_DEFAULT_STATIC_LIBGCC
+ help
+ This option instructs gcc to link in a static version of its
+ support library, libgcc. This means that the binary will require
+ one fewer dynamic library at run time.
+
comment 'Installation Options ("make install" behavior)'
choice
Most people should answer N.
+config BUSYBOX_CONFIG_WARN_SIMPLE_MSG
+ bool "Warn about single parameter bb_xx_msg calls"
+ default BUSYBOX_DEFAULT_WARN_SIMPLE_MSG
+ help
+ This will cause warnings to be shown for any instances of
+ bb_error_msg(), bb_error_msg_and_die(), bb_perror_msg(),
+ bb_perror_msg_and_die(), bb_herror_msg() or bb_herror_msg_and_die()
+ being called with a single parameter. In these cases the equivalent
+ bb_simple_xx_msg function should be used instead.
+ Note that use of STRERROR_FMT may give false positives.
+
+ If you aren't developing busybox, say N here.
+
choice
prompt "Additional debugging library"
default BUSYBOX_CONFIG_NO_DEBUG_LIB
help
Enable support for compression levels 4-9. The default level
is 6. If levels 1-3 are specified, 4 is used.
- If this option is not selected, -N options are ignored and -9
+ If this option is not selected, -N options are ignored and -6
is used.
config BUSYBOX_CONFIG_FEATURE_GZIP_DECOMPRESS
config BUSYBOX_CONFIG_CHVT
bool "chvt (2 kb)"
default BUSYBOX_DEFAULT_CHVT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program is used to change to another terminal.
Example: chvt 4 (change to terminal /dev/tty4)
config BUSYBOX_CONFIG_DEALLOCVT
bool "deallocvt (1.9 kb)"
default BUSYBOX_DEFAULT_DEALLOCVT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program deallocates unused virtual consoles.
config BUSYBOX_CONFIG_DUMPKMAP
bool "dumpkmap (1.6 kb)"
default BUSYBOX_DEFAULT_DUMPKMAP
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program dumps the kernel's keyboard translation table to
stdout, in binary format. You can then use loadkmap to load it.
config BUSYBOX_CONFIG_FGCONSOLE
bool "fgconsole (1.5 kb)"
default BUSYBOX_DEFAULT_FGCONSOLE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program prints active (foreground) console number.
config BUSYBOX_CONFIG_KBD_MODE
bool "kbd_mode (4.1 kb)"
default BUSYBOX_DEFAULT_KBD_MODE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program reports and sets keyboard mode.
config BUSYBOX_CONFIG_LOADFONT
bool "loadfont (5.2 kb)"
default BUSYBOX_DEFAULT_LOADFONT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program loads a console font from standard input.
config BUSYBOX_CONFIG_SETFONT
bool "setfont (24 kb)"
default BUSYBOX_DEFAULT_SETFONT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Allows to load console screen map. Useful for i18n.
config BUSYBOX_CONFIG_LOADKMAP
bool "loadkmap (1.8 kb)"
default BUSYBOX_DEFAULT_LOADKMAP
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program loads a keyboard translation table from
standard input.
config BUSYBOX_CONFIG_OPENVT
bool "openvt (7.2 kb)"
default BUSYBOX_DEFAULT_OPENVT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program is used to start a command on an unused
virtual terminal.
config BUSYBOX_CONFIG_SETCONSOLE
bool "setconsole (3.6 kb)"
default BUSYBOX_DEFAULT_SETCONSOLE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Redirect writes to /dev/console to another device,
like the current tty while logged in via telnet.
config BUSYBOX_CONFIG_SETKEYCODES
bool "setkeycodes (2.1 kb)"
default BUSYBOX_DEFAULT_SETKEYCODES
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program loads entries into the kernel's scancode-to-keycode
map, allowing unusual keyboards to generate usable keycodes.
config BUSYBOX_CONFIG_SETLOGCONS
bool "setlogcons (1.8 kb)"
default BUSYBOX_DEFAULT_SETLOGCONS
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program redirects the output console of kernel messages.
config BUSYBOX_CONFIG_SHOWKEY
bool "showkey (4.7 kb)"
default BUSYBOX_DEFAULT_SHOWKEY
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Shows keys pressed.
Enable option (-I) to output an ISO-8601 compliant
date/time string.
-# defaults to "no": stat's nanosecond field is a bit non-portable
config BUSYBOX_CONFIG_FEATURE_DATE_NANO
bool "Support %[num]N nanosecond format specifier"
- default BUSYBOX_DEFAULT_FEATURE_DATE_NANO # syscall(__NR_clock_gettime)
+ default BUSYBOX_DEFAULT_FEATURE_DATE_NANO # stat's nanosecond field is a bit non-portable
depends on BUSYBOX_CONFIG_DATE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Support %[num]N format specifier. Adds ~250 bytes of code.
bool "Enable display of filesystem status (-f)"
default BUSYBOX_DEFAULT_FEATURE_STAT_FILESYSTEM
depends on BUSYBOX_CONFIG_STAT
- select BUSYBOX_CONFIG_PLATFORM_LINUX # statfs()
help
Without this, stat will not support the '-f' option to display
information about filesystem status.
default BUSYBOX_DEFAULT_UUDECODE
help
uudecode is used to decode a uuencoded file.
+config BUSYBOX_CONFIG_BASE32
+ bool "base32 (4.9 kb)"
+ default BUSYBOX_DEFAULT_BASE32
+ help
+ Base32 encode and decode
config BUSYBOX_CONFIG_BASE64
bool "base64 (4.9 kb)"
default BUSYBOX_DEFAULT_BASE64
config BUSYBOX_CONFIG_LSATTR
bool "lsattr (5.5 kb)"
default BUSYBOX_DEFAULT_LSATTR
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
lsattr lists the file attributes on a second extended file system.
config BUSYBOX_CONFIG_TUNE2FS
WARNING: This option can do much harm if used wrong. Busybox will not
try to protect the user from doing stupid things. Use with care.
+config BUSYBOX_CONFIG_FEATURE_FIND_EMPTY
+ bool "Enable -empty: match empty files or directories"
+ default BUSYBOX_DEFAULT_FEATURE_FIND_EMPTY
+ depends on BUSYBOX_CONFIG_FIND
+ help
+ Support the 'find -empty' option to find empty regular files
+ or directories.
+
config BUSYBOX_CONFIG_FEATURE_FIND_PATH
bool "Enable -path: match pathname with shell pattern"
default BUSYBOX_DEFAULT_FEATURE_FIND_PATH
config BUSYBOX_CONFIG_RUN_INIT
bool "run-init (7.7 kb)"
default BUSYBOX_DEFAULT_RUN_INIT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The run-init utility is used from initramfs to select a new
root device. Under initramfs, you have to use this instead of
config BUSYBOX_CONFIG_FEATURE_USE_SENDFILE
bool "Use sendfile system call"
default BUSYBOX_DEFAULT_FEATURE_USE_SENDFILE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
When enabled, busybox will use the kernel sendfile() function
instead of read/write loops to copy data between file descriptors
config BUSYBOX_CONFIG_MONOTONIC_SYSCALL
bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
default BUSYBOX_DEFAULT_MONOTONIC_SYSCALL
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
time intervals (time, ping, traceroute etc need this).
config BUSYBOX_CONFIG_ADJTIMEX
bool "adjtimex (4.7 kb)"
default BUSYBOX_DEFAULT_ADJTIMEX
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Adjtimex reads and optionally sets adjustment parameters for
the Linux clock adjustment algorithm.
config BUSYBOX_CONFIG_BEEP
bool "beep (2.4 kb)"
default BUSYBOX_DEFAULT_BEEP
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The beep applets beeps in a given freq/Hz.
config BUSYBOX_CONFIG_CONSPY
bool "conspy (10 kb)"
default BUSYBOX_DEFAULT_CONSPY
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
A text-mode VNC like program for Linux virtual terminals.
example: conspy NUM shared access to console num
config BUSYBOX_CONFIG_DEVFSD
bool "devfsd (obsolete)"
default BUSYBOX_DEFAULT_DEVFSD
- select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
This is deprecated and should NOT be used anymore.
config BUSYBOX_CONFIG_FEATURE_DEVFS
bool "Use devfs names for all devices (obsolete)"
default BUSYBOX_DEFAULT_FEATURE_DEVFS
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This is obsolete and should NOT be used anymore.
Use linux >= 2.6 (optionally with hotplug) and mdev instead!
config BUSYBOX_CONFIG_FBSPLASH
bool "fbsplash (26 kb)"
default BUSYBOX_DEFAULT_FBSPLASH
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Shows splash image and progress bar on framebuffer device.
Can be used during boot phase of an embedded device.
config BUSYBOX_CONFIG_HDPARM
bool "hdparm (25 kb)"
default BUSYBOX_DEFAULT_HDPARM
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Get/Set hard drive parameters. Primarily intended for ATA
drives.
config BUSYBOX_CONFIG_I2CGET
bool "i2cget (5.5 kb)"
default BUSYBOX_DEFAULT_I2CGET
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Read from I2C/SMBus chip registers.
config BUSYBOX_CONFIG_I2CSET
bool "i2cset (6.7 kb)"
default BUSYBOX_DEFAULT_I2CSET
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Set I2C registers.
config BUSYBOX_CONFIG_I2CDUMP
bool "i2cdump (7.1 kb)"
default BUSYBOX_DEFAULT_I2CDUMP
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Examine I2C registers.
config BUSYBOX_CONFIG_I2CDETECT
bool "i2cdetect (7.1 kb)"
default BUSYBOX_DEFAULT_I2CDETECT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Detect I2C chips.
config BUSYBOX_CONFIG_I2CTRANSFER
bool "i2ctransfer (4.0 kb)"
default BUSYBOX_DEFAULT_I2CTRANSFER
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Send user-defined I2C messages in one transfer.
config BUSYBOX_CONFIG_LSSCSI
bool "lsscsi (2.5 kb)"
default BUSYBOX_DEFAULT_LSSCSI
- #select PLATFORM_LINUX
help
lsscsi is a utility for displaying information about SCSI buses in the
system and devices connected to them.
default BUSYBOX_DEFAULT_MICROCOM
help
The poor man's minicom utility for chatting with serial port devices.
+config BUSYBOX_CONFIG_MIM
+ bool "mim (0.5 kb)"
+ default BUSYBOX_DEFAULT_MIM
+ depends on BUSYBOX_CONFIG_FEATURE_SH_EMBEDDED_SCRIPTS
+ help
+ Run a script from a Makefile-like specification file.
+ Unlike 'make' dependencies aren't supported.
config BUSYBOX_CONFIG_MT
bool "mt (2.5 kb)"
default BUSYBOX_DEFAULT_MT
config BUSYBOX_CONFIG_NANDWRITE
bool "nandwrite (4.8 kb)"
default BUSYBOX_DEFAULT_NANDWRITE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Write to the specified MTD device, with bad blocks awareness
config BUSYBOX_CONFIG_NANDDUMP
bool "nanddump (5.2 kb)"
default BUSYBOX_DEFAULT_NANDDUMP
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Dump the content of raw NAND chip
config BUSYBOX_CONFIG_PARTPROBE
bool "partprobe (3.5 kb)"
default BUSYBOX_DEFAULT_PARTPROBE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Ask kernel to rescan partition table.
config BUSYBOX_CONFIG_RAIDAUTORUN
bool "raidautorun (1.3 kb)"
default BUSYBOX_DEFAULT_RAIDAUTORUN
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
raidautorun tells the kernel md driver to
search and start RAID arrays.
bool "readahead (1.5 kb)"
default BUSYBOX_DEFAULT_READAHEAD
depends on BUSYBOX_CONFIG_LFS
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Preload the files listed on the command line into RAM cache so that
subsequent reads on these files will not block on disk I/O.
config BUSYBOX_CONFIG_RFKILL
bool "rfkill (4.4 kb)"
default BUSYBOX_DEFAULT_RFKILL # doesn't build on Ubuntu 9.04
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Enable/disable wireless devices.
config BUSYBOX_CONFIG_RX
bool "rx (2.9 kb)"
default BUSYBOX_DEFAULT_RX
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Receive files using the Xmodem protocol.
config BUSYBOX_CONFIG_SETFATTR
config BUSYBOX_CONFIG_SETSERIAL
bool "setserial (6.9 kb)"
default BUSYBOX_DEFAULT_SETSERIAL
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Retrieve or set Linux serial port.
config BUSYBOX_CONFIG_STRINGS
config BUSYBOX_CONFIG_UBIATTACH
bool "ubiattach (4.2 kb)"
default BUSYBOX_DEFAULT_UBIATTACH
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Attach MTD device to an UBI device.
config BUSYBOX_CONFIG_UBIDETACH
bool "ubidetach (4.1 kb)"
default BUSYBOX_DEFAULT_UBIDETACH
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Detach MTD device from an UBI device.
config BUSYBOX_CONFIG_UBIMKVOL
bool "ubimkvol (5.3 kb)"
default BUSYBOX_DEFAULT_UBIMKVOL
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Create a UBI volume.
config BUSYBOX_CONFIG_UBIRMVOL
bool "ubirmvol (4.9 kb)"
default BUSYBOX_DEFAULT_UBIRMVOL
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Delete a UBI volume.
config BUSYBOX_CONFIG_UBIRSVOL
bool "ubirsvol (4.2 kb)"
default BUSYBOX_DEFAULT_UBIRSVOL
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Resize a UBI volume.
config BUSYBOX_CONFIG_UBIUPDATEVOL
bool "ubiupdatevol (5.2 kb)"
default BUSYBOX_DEFAULT_UBIUPDATEVOL
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Update a UBI volume.
config BUSYBOX_CONFIG_UBIRENAME
bool "ubirename (2.4 kb)"
default BUSYBOX_DEFAULT_UBIRENAME
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Utility to rename UBI volumes
config BUSYBOX_CONFIG_VOLNAME
config BUSYBOX_CONFIG_WATCHDOG
bool "watchdog (5.3 kb)"
default BUSYBOX_DEFAULT_WATCHDOG
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The watchdog utility is used with hardware or software watchdog
device drivers. It opens the specified watchdog device special file
config BUSYBOX_CONFIG_DEPMOD
bool "depmod (27 kb)"
default BUSYBOX_DEFAULT_DEPMOD
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
depmod generates modules.dep (and potentially modules.alias
and modules.symbols) that contain dependency information
config BUSYBOX_CONFIG_INSMOD
bool "insmod (22 kb)"
default BUSYBOX_DEFAULT_INSMOD
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
insmod is used to load specified modules in the running kernel.
config BUSYBOX_CONFIG_LSMOD
bool "lsmod (1.9 kb)"
default BUSYBOX_DEFAULT_LSMOD
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
lsmod is used to display a list of loaded modules.
config BUSYBOX_CONFIG_MODINFO
bool "modinfo (24 kb)"
default BUSYBOX_DEFAULT_MODINFO
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Show information about a Linux Kernel module
config BUSYBOX_CONFIG_MODPROBE
bool "modprobe (28 kb)"
default BUSYBOX_DEFAULT_MODPROBE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Handle the loading of modules, and their dependencies on a high
level.
config BUSYBOX_CONFIG_RMMOD
bool "rmmod (3.3 kb)"
default BUSYBOX_DEFAULT_RMMOD
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
rmmod is used to unload specified modules from the kernel.
config BUSYBOX_CONFIG_ARP
bool "arp (10 kb)"
default BUSYBOX_DEFAULT_ARP
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Manipulate the system ARP cache.
config BUSYBOX_CONFIG_ARPING
bool "arping (9 kb)"
default BUSYBOX_DEFAULT_ARPING
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Ping hosts by ARP packets.
config BUSYBOX_CONFIG_BRCTL
bool "brctl (4.7 kb)"
default BUSYBOX_DEFAULT_BRCTL
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Manage ethernet bridges.
Supports addbr/delbr and addif/delif.
config BUSYBOX_CONFIG_ETHER_WAKE
bool "ether-wake (4.9 kb)"
default BUSYBOX_DEFAULT_ETHER_WAKE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Send a magic packet to wake up sleeping machines.
config BUSYBOX_CONFIG_FTPD
help
Makes httpd send files using GZIP content encoding if the
client supports it and a pre-compressed <file>.gz exists.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_ETAG
+ bool "Support caching via ETag header"
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_ETAG
+ depends on BUSYBOX_CONFIG_HTTPD
+ help
+ If server responds with ETag then next time client (browser)
+ resend it via If-None-Match header.
+ Then httpd will check if file wasn't modified and if not,
+ return 304 Not Modified status code.
+ The ETag value is constructed from last modification date
+ in unix epoch, and size: "hex(last_mod)-hex(file_size)".
+ It's not completely reliable as hash functions but fair enough.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_LAST_MODIFIED
+ bool "Add Last-Modified header to response"
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_LAST_MODIFIED
+ depends on BUSYBOX_CONFIG_HTTPD
+ help
+ The Last-Modified header is used for cache validation.
+ The client sends last seen mtime to server in If-Modified-Since.
+ Both headers MUST be an RFC 1123 formatted, which is hard to parse.
+ Use ETag header instead.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_DATE
+ bool "Add Date header to response"
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_DATE
+ depends on BUSYBOX_CONFIG_HTTPD
+ help
+ RFC2616 says that server MUST add Date header to response.
+ But it is almost useless and can be omitted.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_ACL_IP
+ bool "ACL IP"
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_ACL_IP
+ depends on BUSYBOX_CONFIG_HTTPD
+ help
+ Support IP deny/allow rules
config BUSYBOX_CONFIG_IFCONFIG
bool "ifconfig (12 kb)"
default BUSYBOX_DEFAULT_IFCONFIG
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Ifconfig is used to configure the kernel-resident network interfaces.
config BUSYBOX_CONFIG_IFENSLAVE
bool "ifenslave (13 kb)"
default BUSYBOX_DEFAULT_IFENSLAVE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Userspace application to bind several interfaces
to a logical interface (use with kernel bonding driver).
config BUSYBOX_CONFIG_IFPLUGD
bool "ifplugd (10 kb)"
default BUSYBOX_DEFAULT_IFPLUGD
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Network interface plug detection daemon.
config BUSYBOX_CONFIG_IFUP
config BUSYBOX_CONFIG_IP
bool "ip (35 kb)"
default BUSYBOX_DEFAULT_IP
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The "ip" applet is a TCP/IP interface configuration and routing
utility.
bool "ipaddr (14 kb)"
default BUSYBOX_DEFAULT_IPADDR
select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Short form of "ip addr"
bool "iplink (17 kb)"
default BUSYBOX_DEFAULT_IPLINK
select BUSYBOX_CONFIG_FEATURE_IP_LINK
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Short form of "ip link"
bool "iproute (15 kb)"
default BUSYBOX_DEFAULT_IPROUTE
select BUSYBOX_CONFIG_FEATURE_IP_ROUTE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Short form of "ip route"
bool "iptunnel (9.6 kb)"
default BUSYBOX_DEFAULT_IPTUNNEL
select BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Short form of "ip tunnel"
bool "iprule (10 kb)"
default BUSYBOX_DEFAULT_IPRULE
select BUSYBOX_CONFIG_FEATURE_IP_RULE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Short form of "ip rule"
bool "ipneigh (8.3 kb)"
default BUSYBOX_DEFAULT_IPNEIGH
select BUSYBOX_CONFIG_FEATURE_IP_NEIGH
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Short form of "ip neigh"
config BUSYBOX_CONFIG_NAMEIF
bool "nameif (6.6 kb)"
default BUSYBOX_DEFAULT_NAMEIF
- select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
nameif is used to rename network interface by its MAC address.
config BUSYBOX_CONFIG_NETSTAT
bool "netstat (10 kb)"
default BUSYBOX_DEFAULT_NETSTAT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
netstat prints information about the Linux networking subsystem.
config BUSYBOX_CONFIG_NTPD
bool "ntpd (22 kb)"
default BUSYBOX_DEFAULT_NTPD
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The NTP client/server daemon.
config BUSYBOX_CONFIG_PING
bool "ping (10 kb)"
default BUSYBOX_DEFAULT_PING
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
elicit an ICMP ECHO_RESPONSE from a host or gateway.
config BUSYBOX_CONFIG_ROUTE
bool "route (8.7 kb)"
default BUSYBOX_DEFAULT_ROUTE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Route displays or manipulates the kernel's IP routing tables.
config BUSYBOX_CONFIG_SLATTACH
bool "slattach (6.2 kb)"
default BUSYBOX_DEFAULT_SLATTACH
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
slattach configures serial line as SLIP network interface.
config BUSYBOX_CONFIG_SSL_CLIENT
config BUSYBOX_CONFIG_TRACEROUTE
bool "traceroute (11 kb)"
default BUSYBOX_DEFAULT_TRACEROUTE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Utility to trace the route of IP packets.
config BUSYBOX_CONFIG_TUNCTL
bool "tunctl (6.2 kb)"
default BUSYBOX_DEFAULT_TUNCTL
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
tunctl creates or deletes tun devices.
config BUSYBOX_CONFIG_VCONFIG
bool "vconfig (2.3 kb)"
default BUSYBOX_DEFAULT_VCONFIG
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Creates, removes, and configures VLAN interfaces
config BUSYBOX_CONFIG_WGET
patches, but do want to waste bandwidth expaining how wrong
it is, you will be ignored.
+ FEATURE_WGET_OPENSSL does implement TLS verification
+ using the certificates available to OpenSSL.
+
config BUSYBOX_CONFIG_FEATURE_WGET_OPENSSL
bool "Try to connect to HTTPS using openssl"
default BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL
If openssl can't be executed, internal TLS code will be used
(if you enabled it); if openssl can be executed but fails later,
wget can't detect this, and download will fail.
+
+ By default TLS verification is performed, unless
+ --no-check-certificate option is passed.
config BUSYBOX_CONFIG_WHOIS
bool "whois (6.3 kb)"
default BUSYBOX_DEFAULT_WHOIS
config BUSYBOX_CONFIG_ZCIP
bool "zcip (8.4 kb)"
default BUSYBOX_DEFAULT_ZCIP
- select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
config BUSYBOX_CONFIG_UDHCPD
bool "udhcpd (21 kb)"
default BUSYBOX_DEFAULT_UDHCPD
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
udhcpd is a DHCP server geared primarily toward embedded systems,
while striving to be fully functional and RFC compliant.
config BUSYBOX_CONFIG_UDHCPC
bool "udhcpc (24 kb)"
default BUSYBOX_DEFAULT_UDHCPC
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
udhcpc is a DHCP client geared primarily toward embedded systems,
while striving to be fully functional and RFC compliant.
config BUSYBOX_CONFIG_FREE
bool "free (3.1 kb)"
default BUSYBOX_DEFAULT_FREE
- select BUSYBOX_CONFIG_PLATFORM_LINUX #sysinfo()
help
free displays the total amount of free and used physical and swap
memory in the system, as well as the buffers used by the kernel.
bool "Enable -o time and -o etime specifiers"
default BUSYBOX_DEFAULT_FEATURE_PS_TIME
depends on (BUSYBOX_CONFIG_PS || BUSYBOX_CONFIG_MINIPS) && BUSYBOX_CONFIG_DESKTOP
- select BUSYBOX_CONFIG_PLATFORM_LINUX
config BUSYBOX_CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS
bool "Support Linux prior to 2.4.0 and non-ELF systems"
config BUSYBOX_CONFIG_UPTIME
bool "uptime (3.7 kb)"
default BUSYBOX_DEFAULT_UPTIME
- select BUSYBOX_CONFIG_PLATFORM_LINUX #sysinfo()
help
uptime gives a one line display of the current time, how long
the system has been running, how many users are currently logged
config BUSYBOX_CONFIG_SH_IS_ASH
depends on !BUSYBOX_CONFIG_NOMMU
bool "ash"
+ select BUSYBOX_CONFIG_SHELL_ASH
help
Choose ash to be the shell executed by 'sh' name.
The ash code will be built into busybox. If you don't select
config BUSYBOX_CONFIG_SH_IS_HUSH
bool "hush"
+ select BUSYBOX_CONFIG_SHELL_HUSH
help
Choose hush to be the shell executed by 'sh' name.
The hush code will be built into busybox. If you don't select
config BUSYBOX_CONFIG_BASH_IS_ASH
depends on !BUSYBOX_CONFIG_NOMMU
bool "ash"
+ select BUSYBOX_CONFIG_SHELL_ASH
help
Choose ash to be the shell executed by 'bash' name.
The ash code will be built into busybox. If you don't select
config BUSYBOX_CONFIG_BASH_IS_HUSH
bool "hush"
+ select BUSYBOX_CONFIG_SHELL_HUSH
help
Choose hush to be the shell executed by 'bash' name.
The hush code will be built into busybox. If you don't select
endchoice
+config BUSYBOX_CONFIG_SHELL_ASH
+ bool #hidden option
+ depends on !BUSYBOX_CONFIG_NOMMU
+
config BUSYBOX_CONFIG_ASH
bool "ash (78 kb)"
default BUSYBOX_DEFAULT_ASH
depends on !BUSYBOX_CONFIG_NOMMU
+ select BUSYBOX_CONFIG_SHELL_ASH
help
The most complete and most pedantically correct shell included with
busybox. This shell is actually a derivative of the Debian 'dash'
# ash options
# note: Don't remove !NOMMU part in the next line; it would break
# menuconfig's indenting.
-if !NOMMU && (BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH)
+if !NOMMU && (BUSYBOX_CONFIG_SHELL_ASH || BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH)
config BUSYBOX_CONFIG_ASH_OPTIMIZE_FOR_SIZE
bool "Optimize for size instead of speed"
default BUSYBOX_DEFAULT_ASH_OPTIMIZE_FOR_SIZE
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_SHELL_ASH
config BUSYBOX_CONFIG_ASH_INTERNAL_GLOB
bool "Use internal glob() implementation"
default BUSYBOX_DEFAULT_ASH_INTERNAL_GLOB # Y is bigger, but because of uclibc glob() bug, let Y be default for now
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_SHELL_ASH
help
Do not use glob() function from libc, use internal implementation.
Use this if you are getting "glob.h: No such file or directory"
config BUSYBOX_CONFIG_ASH_BASH_COMPAT
bool "bash-compatible extensions"
default BUSYBOX_DEFAULT_ASH_BASH_COMPAT
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_SHELL_ASH
config BUSYBOX_CONFIG_ASH_BASH_SOURCE_CURDIR
bool "'source' and '.' builtins search current directory after $PATH"
config BUSYBOX_CONFIG_ASH_JOB_CONTROL
bool "Job control"
default BUSYBOX_DEFAULT_ASH_JOB_CONTROL
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_SHELL_ASH
config BUSYBOX_CONFIG_ASH_ALIAS
bool "Alias support"
default BUSYBOX_DEFAULT_ASH_ALIAS
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_SHELL_ASH
config BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT
bool "Pseudorandom generator and $RANDOM variable"
default BUSYBOX_DEFAULT_ASH_RANDOM_SUPPORT
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_SHELL_ASH
help
Enable pseudorandom generator and dynamic variable "$RANDOM".
Each read of "$RANDOM" will generate a new pseudorandom value.
config BUSYBOX_CONFIG_ASH_EXPAND_PRMT
bool "Expand prompt string"
default BUSYBOX_DEFAULT_ASH_EXPAND_PRMT
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_SHELL_ASH
help
$PS# may contain volatile content, such as backquote commands.
This option recreates the prompt string from the environment
config BUSYBOX_CONFIG_ASH_IDLE_TIMEOUT
bool "Idle timeout variable $TMOUT"
default BUSYBOX_DEFAULT_ASH_IDLE_TIMEOUT
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_SHELL_ASH
help
Enable bash-like auto-logout after $TMOUT seconds of idle time.
config BUSYBOX_CONFIG_ASH_MAIL
bool "Check for new mail in interactive shell"
default BUSYBOX_DEFAULT_ASH_MAIL
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_SHELL_ASH
help
Enable "check for new mail" function:
if set, $MAIL file and $MAILPATH list of files
config BUSYBOX_CONFIG_ASH_ECHO
bool "echo builtin"
default BUSYBOX_DEFAULT_ASH_ECHO
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_SHELL_ASH
config BUSYBOX_CONFIG_ASH_PRINTF
bool "printf builtin"
default BUSYBOX_DEFAULT_ASH_PRINTF
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_SHELL_ASH
config BUSYBOX_CONFIG_ASH_TEST
bool "test builtin"
default BUSYBOX_DEFAULT_ASH_TEST
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_SHELL_ASH
config BUSYBOX_CONFIG_ASH_HELP
bool "help builtin"
default BUSYBOX_DEFAULT_ASH_HELP
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_SHELL_ASH
config BUSYBOX_CONFIG_ASH_GETOPTS
bool "getopts builtin"
default BUSYBOX_DEFAULT_ASH_GETOPTS
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_SHELL_ASH
config BUSYBOX_CONFIG_ASH_CMDCMD
bool "command builtin"
default BUSYBOX_DEFAULT_ASH_CMDCMD
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_SHELL_ASH
help
Enable support for the 'command' builtin, which allows
you to run the specified command or builtin,
config BUSYBOX_CONFIG_HUSH
bool "hush (68 kb)"
default BUSYBOX_DEFAULT_HUSH
+ select BUSYBOX_CONFIG_SHELL_HUSH
help
hush is a small shell. It handles the normal flow control
constructs such as if/then/elif/else/fi, for/in/do/done, while loops,
It does not handle select, aliases, tilde expansion,
&>file and >&file redirection of stdout+stderr.
+config BUSYBOX_CONFIG_SHELL_HUSH
+ bool "Internal shell for embedded script support"
+ default BUSYBOX_DEFAULT_SHELL_HUSH
+
+# hush options
+# It's only needed to get "nice" menuconfig indenting.
+if SHELL_HUSH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+
config BUSYBOX_CONFIG_HUSH_BASH_COMPAT
bool "bash-compatible extensions"
default BUSYBOX_DEFAULT_HUSH_BASH_COMPAT
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_BRACE_EXPANSION
bool "Brace expansion"
config BUSYBOX_CONFIG_HUSH_INTERACTIVE
bool "Interactive mode"
default BUSYBOX_DEFAULT_HUSH_INTERACTIVE
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
help
Enable interactive mode (prompt and command editing).
Without this, hush simply reads and executes commands
config BUSYBOX_CONFIG_HUSH_TICK
bool "Support command substitution"
default BUSYBOX_DEFAULT_HUSH_TICK
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
help
Enable `command` and $(command).
config BUSYBOX_CONFIG_HUSH_IF
bool "Support if/then/elif/else/fi"
default BUSYBOX_DEFAULT_HUSH_IF
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_LOOPS
bool "Support for, while and until loops"
default BUSYBOX_DEFAULT_HUSH_LOOPS
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_CASE
bool "Support case ... esac statement"
default BUSYBOX_DEFAULT_HUSH_CASE
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
help
Enable case ... esac statement. +400 bytes.
config BUSYBOX_CONFIG_HUSH_FUNCTIONS
bool "Support funcname() { commands; } syntax"
default BUSYBOX_DEFAULT_HUSH_FUNCTIONS
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
help
Enable support for shell functions. +800 bytes.
config BUSYBOX_CONFIG_HUSH_RANDOM_SUPPORT
bool "Pseudorandom generator and $RANDOM variable"
default BUSYBOX_DEFAULT_HUSH_RANDOM_SUPPORT
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
help
Enable pseudorandom generator and dynamic variable "$RANDOM".
Each read of "$RANDOM" will generate a new pseudorandom value.
config BUSYBOX_CONFIG_HUSH_MODE_X
bool "Support 'hush -x' option and 'set -x' command"
default BUSYBOX_DEFAULT_HUSH_MODE_X
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
help
This instructs hush to print commands before execution.
Adds ~300 bytes.
config BUSYBOX_CONFIG_HUSH_ECHO
bool "echo builtin"
default BUSYBOX_DEFAULT_HUSH_ECHO
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_PRINTF
bool "printf builtin"
default BUSYBOX_DEFAULT_HUSH_PRINTF
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_TEST
bool "test builtin"
default BUSYBOX_DEFAULT_HUSH_TEST
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_HELP
bool "help builtin"
default BUSYBOX_DEFAULT_HUSH_HELP
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_EXPORT
bool "export builtin"
default BUSYBOX_DEFAULT_HUSH_EXPORT
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_EXPORT_N
bool "Support 'export -n' option"
config BUSYBOX_CONFIG_HUSH_READONLY
bool "readonly builtin"
default BUSYBOX_DEFAULT_HUSH_READONLY
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
help
Enable support for read-only variables.
config BUSYBOX_CONFIG_HUSH_KILL
bool "kill builtin (supports kill %jobspec)"
default BUSYBOX_DEFAULT_HUSH_KILL
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_WAIT
bool "wait builtin"
default BUSYBOX_DEFAULT_HUSH_WAIT
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_COMMAND
bool "command builtin"
default BUSYBOX_DEFAULT_HUSH_COMMAND
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_TRAP
bool "trap builtin"
default BUSYBOX_DEFAULT_HUSH_TRAP
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_TYPE
bool "type builtin"
default BUSYBOX_DEFAULT_HUSH_TYPE
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_TIMES
bool "times builtin"
default BUSYBOX_DEFAULT_HUSH_TIMES
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_READ
bool "read builtin"
default BUSYBOX_DEFAULT_HUSH_READ
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_SET
bool "set builtin"
default BUSYBOX_DEFAULT_HUSH_SET
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_UNSET
bool "unset builtin"
default BUSYBOX_DEFAULT_HUSH_UNSET
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_ULIMIT
bool "ulimit builtin"
default BUSYBOX_DEFAULT_HUSH_ULIMIT
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_UMASK
bool "umask builtin"
default BUSYBOX_DEFAULT_HUSH_UMASK
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_GETOPTS
bool "getopts builtin"
default BUSYBOX_DEFAULT_HUSH_GETOPTS
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_HUSH_MEMLEAK
bool "memleak builtin (debugging)"
default BUSYBOX_DEFAULT_HUSH_MEMLEAK
- depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_HUSH
+
+endif # hush options
comment "Options common to all shells"
-if ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+if BUSYBOX_CONFIG_SHELL_ASH || BUSYBOX_CONFIG_SHELL_HUSH
config BUSYBOX_CONFIG_FEATURE_SH_MATH
bool "POSIX math support"
default BUSYBOX_DEFAULT_FEATURE_SH_MATH
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_ASH || BUSYBOX_CONFIG_SHELL_HUSH
help
Enable math support in the shell via $((...)) syntax.
config BUSYBOX_CONFIG_FEATURE_SH_EXTRA_QUIET
bool "Hide message on interactive shell startup"
default BUSYBOX_DEFAULT_FEATURE_SH_EXTRA_QUIET
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_ASH || BUSYBOX_CONFIG_SHELL_HUSH
help
Remove the busybox introduction when starting a shell.
config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE
bool "Standalone shell"
default BUSYBOX_DEFAULT_FEATURE_SH_STANDALONE
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_ASH || BUSYBOX_CONFIG_SHELL_HUSH
help
This option causes busybox shells to use busybox applets
in preference to executables in the PATH whenever possible. For
config BUSYBOX_CONFIG_FEATURE_SH_NOFORK
bool "Run 'nofork' applets directly"
default BUSYBOX_DEFAULT_FEATURE_SH_NOFORK
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_ASH || BUSYBOX_CONFIG_SHELL_HUSH
help
This option causes busybox shells to not execute typical
fork/exec/wait sequence, but call <applet>_main directly,
config BUSYBOX_CONFIG_FEATURE_SH_READ_FRAC
bool "read -t N.NNN support (+110 bytes)"
default BUSYBOX_DEFAULT_FEATURE_SH_READ_FRAC
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_ASH || BUSYBOX_CONFIG_SHELL_HUSH
help
Enable support for fractional second timeout in read builtin.
config BUSYBOX_CONFIG_FEATURE_SH_HISTFILESIZE
bool "Use $HISTFILESIZE"
default BUSYBOX_DEFAULT_FEATURE_SH_HISTFILESIZE
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_ASH || BUSYBOX_CONFIG_SHELL_HUSH
help
This option makes busybox shells to use $HISTFILESIZE variable
to set shell history size. Note that its max value is capped
config BUSYBOX_CONFIG_FEATURE_SH_EMBEDDED_SCRIPTS
bool "Embed scripts in the binary"
default BUSYBOX_DEFAULT_FEATURE_SH_EMBEDDED_SCRIPTS
- depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_SHELL_ASH || BUSYBOX_CONFIG_SHELL_HUSH
help
Allow scripts to be compressed and embedded in the busybox
binary. The scripts should be placed in the 'embed' directory
bool "Use the klogctl() interface"
default BUSYBOX_DEFAULT_FEATURE_KLOGD_KLOGCTL
depends on BUSYBOX_CONFIG_KLOGD
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The klogd applet supports two interfaces for reading
kernel messages. Linux provides the klogctl() interface
help
Supports restricted syslogd config. See docs/syslog.conf.txt
+config BUSYBOX_CONFIG_FEATURE_SYSLOGD_PRECISE_TIMESTAMPS
+ bool "Include milliseconds in timestamps"
+ default BUSYBOX_DEFAULT_FEATURE_SYSLOGD_PRECISE_TIMESTAMPS
+ depends on BUSYBOX_CONFIG_SYSLOGD
+ help
+ Includes milliseconds (HH:MM:SS.mmm) in timestamp when
+ timestamps are added.
+
config BUSYBOX_CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE
int "Read buffer size in bytes"
default BUSYBOX_DEFAULT_FEATURE_SYSLOGD_READ_BUFFER_SIZE
bool "Linux kernel printk buffer support"
default BUSYBOX_DEFAULT_FEATURE_KMSG_SYSLOG
depends on BUSYBOX_CONFIG_SYSLOGD
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
When you enable this feature, the syslogd utility will
write system log message to the Linux kernel's printk buffer.
config BUSYBOX_CONFIG_ACPID
bool "acpid (9 kb)"
default BUSYBOX_DEFAULT_ACPID
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
acpid listens to ACPI events coming either in textual form from
/proc/acpi/event (though it is marked deprecated it is still widely
config BUSYBOX_CONFIG_BLKDISCARD
bool "blkdiscard (4.3 kb)"
default BUSYBOX_DEFAULT_BLKDISCARD
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
blkdiscard discards sectors on a given device.
config BUSYBOX_CONFIG_BLKID
bool "blkid (12 kb)"
default BUSYBOX_DEFAULT_BLKID
- select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_VOLUMEID
help
Lists labels and UUIDs of all filesystems.
config BUSYBOX_CONFIG_DMESG
bool "dmesg (3.7 kb)"
default BUSYBOX_DEFAULT_DMESG
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
dmesg is used to examine or control the kernel ring buffer. When the
Linux kernel prints messages to the system log, they are stored in
config BUSYBOX_CONFIG_EJECT
bool "eject (4 kb)"
default BUSYBOX_DEFAULT_EJECT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Used to eject cdroms. (defaults to /dev/cdrom)
config BUSYBOX_CONFIG_FATATTR
bool "fatattr (1.9 kb)"
default BUSYBOX_DEFAULT_FATATTR
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
fatattr lists or changes the file attributes on a fat file system.
config BUSYBOX_CONFIG_FBSET
bool "fbset (5.9 kb)"
default BUSYBOX_DEFAULT_FBSET
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
fbset is used to show or change the settings of a Linux frame buffer
device. The frame buffer device provides a simple and unique
config BUSYBOX_CONFIG_FDFORMAT
bool "fdformat (4.4 kb)"
default BUSYBOX_DEFAULT_FDFORMAT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
fdformat is used to low-level format a floppy disk.
config BUSYBOX_CONFIG_FDISK
bool "fdisk (37 kb)"
default BUSYBOX_DEFAULT_FDISK
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The fdisk utility is used to divide hard disks into one or more
logical disks, which are generally called partitions. This utility
config BUSYBOX_CONFIG_FINDFS
bool "findfs (12 kb)"
default BUSYBOX_DEFAULT_FINDFS
- select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_VOLUMEID
help
Prints the name of a filesystem with given label or UUID.
config BUSYBOX_CONFIG_FDFLUSH
bool "fdflush (1.3 kb)"
default BUSYBOX_DEFAULT_FDFLUSH
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
fdflush is only needed when changing media on slightly-broken
removable media drives. It is used to make Linux believe that a
config BUSYBOX_CONFIG_FREERAMDISK
bool "freeramdisk (1.3 kb)"
default BUSYBOX_DEFAULT_FREERAMDISK
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Linux allows you to create ramdisks. This utility allows you to
delete them and completely free all memory that was used for the
config BUSYBOX_CONFIG_FSFREEZE
bool "fsfreeze (3.5 kb)"
default BUSYBOX_DEFAULT_FSFREEZE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_LONG_OPTS
help
Halt new accesses and flush writes on a mounted filesystem.
config BUSYBOX_CONFIG_FSTRIM
bool "fstrim (4.4 kb)"
default BUSYBOX_DEFAULT_FSTRIM
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Discard unused blocks on a mounted filesystem.
config BUSYBOX_CONFIG_GETOPT
The hexdump utility is used to display binary data in a readable
way that is comparable to the output from most hex editors.
-config BUSYBOX_CONFIG_FEATURE_HEXDUMP_REVERSE
- bool "Support -R, reverse of 'hexdump -Cv'"
- default BUSYBOX_DEFAULT_FEATURE_HEXDUMP_REVERSE
- depends on BUSYBOX_CONFIG_HEXDUMP
- help
- The hexdump utility is used to display binary data in an ascii
- readable way. This option creates binary data from an ascii input.
- NB: this option is non-standard. It's unwise to use it in scripts
- aimed to be portable.
-
config BUSYBOX_CONFIG_HD
bool "hd (7.8 kb)"
default BUSYBOX_DEFAULT_HD
config BUSYBOX_CONFIG_HWCLOCK
bool "hwclock (5.8 kb)"
default BUSYBOX_DEFAULT_HWCLOCK
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The hwclock utility is used to read and set the hardware clock
on a system. This is primarily used to set the current time on
config BUSYBOX_CONFIG_IONICE
bool "ionice (3.8 kb)"
default BUSYBOX_DEFAULT_IONICE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Set/set program io scheduling class and priority
Requires kernel >= 2.6.13
config BUSYBOX_CONFIG_IPCS
bool "ipcs (11 kb)"
default BUSYBOX_DEFAULT_IPCS
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The ipcs utility is used to provide information on the currently
allocated System V interprocess (IPC) objects in the system.
config BUSYBOX_CONFIG_LOSETUP
bool "losetup (5.5 kb)"
default BUSYBOX_DEFAULT_LOSETUP
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
losetup is used to associate or detach a loop device with a regular
file or block device, and to query the status of a loop device. This
config BUSYBOX_CONFIG_LSPCI
bool "lspci (6.3 kb)"
default BUSYBOX_DEFAULT_LSPCI
- #select PLATFORM_LINUX
help
lspci is a utility for displaying information about PCI buses in the
system and devices connected to them.
config BUSYBOX_CONFIG_LSUSB
bool "lsusb (4.2 kb)"
default BUSYBOX_DEFAULT_LSUSB
- #select PLATFORM_LINUX
help
lsusb is a utility for displaying information about USB buses in the
system and devices connected to them.
config BUSYBOX_CONFIG_MDEV
bool "mdev (17 kb)"
default BUSYBOX_DEFAULT_MDEV
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
mdev is a mini-udev implementation for dynamically creating device
nodes in the /dev directory.
config BUSYBOX_CONFIG_MKE2FS
bool "mke2fs (10 kb)"
default BUSYBOX_DEFAULT_MKE2FS
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Utility to create EXT2 filesystems.
config BUSYBOX_CONFIG_MKFS_EXT2
bool "mkfs.ext2 (10 kb)"
default BUSYBOX_DEFAULT_MKFS_EXT2
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Alias to "mke2fs".
config BUSYBOX_CONFIG_MKFS_MINIX
bool "mkfs.minix (10 kb)"
default BUSYBOX_DEFAULT_MKFS_MINIX
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The minix filesystem is a nice, small, compact, read-write filesystem
with little overhead. If you wish to be able to create minix
config BUSYBOX_CONFIG_MKFS_REISER
bool "mkfs_reiser"
default BUSYBOX_DEFAULT_MKFS_REISER
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Utility to create ReiserFS filesystems.
Note: this applet needs a lot of testing and polishing.
config BUSYBOX_CONFIG_MKDOSFS
bool "mkdosfs (7.2 kb)"
default BUSYBOX_DEFAULT_MKDOSFS
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Utility to create FAT32 filesystems.
config BUSYBOX_CONFIG_MKFS_VFAT
bool "mkfs.vfat (7.2 kb)"
default BUSYBOX_DEFAULT_MKFS_VFAT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Alias to "mkdosfs".
config BUSYBOX_CONFIG_MKSWAP
config BUSYBOX_CONFIG_MOUNT
bool "mount (23 kb)"
default BUSYBOX_DEFAULT_MOUNT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
All files and filesystems in Unix are arranged into one big directory
tree. The 'mount' utility is used to graft a filesystem onto a
config BUSYBOX_CONFIG_NOLOGIN_DEPENDENCIES
bool "Enable dependencies for nologin"
- default BUSYBOX_DEFAULT_NOLOGIN_DEPENDENCIES
+ default BUSYBOX_DEFAULT_NOLOGIN_DEPENDENCIES # Y default makes it harder to select single-applet test
depends on BUSYBOX_CONFIG_NOLOGIN
select BUSYBOX_CONFIG_CAT
select BUSYBOX_CONFIG_ECHO
config BUSYBOX_CONFIG_NSENTER
bool "nsenter (6.5 kb)"
default BUSYBOX_DEFAULT_NSENTER
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Run program with namespaces of other processes.
config BUSYBOX_CONFIG_PIVOT_ROOT
bool "pivot_root (1.1 kb)"
default BUSYBOX_DEFAULT_PIVOT_ROOT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The pivot_root utility swaps the mount points for the root filesystem
with some other mounted filesystem. This allows you to do all sorts
config BUSYBOX_CONFIG_READPROFILE
bool "readprofile (7.1 kb)"
default BUSYBOX_DEFAULT_READPROFILE
- #select PLATFORM_LINUX
help
This allows you to parse /proc/profile for basic profiling.
config BUSYBOX_CONFIG_RENICE
config BUSYBOX_CONFIG_RTCWAKE
bool "rtcwake (6.8 kb)"
default BUSYBOX_DEFAULT_RTCWAKE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Enter a system sleep state until specified wakeup time.
config BUSYBOX_CONFIG_SCRIPT
config BUSYBOX_CONFIG_SETARCH
bool "setarch (3.6 kb)"
default BUSYBOX_DEFAULT_SETARCH
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The linux32 utility is used to create a 32bit environment for the
specified program (usually a shell). It only makes sense to have
config BUSYBOX_CONFIG_LINUX32
bool "linux32 (3.3 kb)"
default BUSYBOX_DEFAULT_LINUX32
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Alias to "setarch linux32".
config BUSYBOX_CONFIG_LINUX64
bool "linux64 (3.3 kb)"
default BUSYBOX_DEFAULT_LINUX64
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Alias to "setarch linux64".
config BUSYBOX_CONFIG_SETPRIV
bool "setpriv (6.6 kb)"
default BUSYBOX_DEFAULT_SETPRIV
- select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_LONG_OPTS
help
Run a program with different Linux privilege settings.
config BUSYBOX_CONFIG_SWAPON
bool "swapon (15 kb)"
default BUSYBOX_DEFAULT_SWAPON
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Once you have created some swap space using 'mkswap', you also need
to enable your swap space with the 'swapon' utility. The 'swapoff'
config BUSYBOX_CONFIG_SWAPOFF
bool "swapoff (14 kb)"
default BUSYBOX_DEFAULT_SWAPOFF
- select BUSYBOX_CONFIG_PLATFORM_LINUX
config BUSYBOX_CONFIG_FEATURE_SWAPONOFF_LABEL
bool "Support specifying devices by label or UUID"
config BUSYBOX_CONFIG_SWITCH_ROOT
bool "switch_root (5.5 kb)"
default BUSYBOX_DEFAULT_SWITCH_ROOT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The switch_root utility is used from initramfs to select a new
root device. Under initramfs, you have to use this instead of
Needed for machines with more than 32-64 CPUs:
affinity parameter 0xHHHHHHHHHHHHHHHHHHHH can be arbitrarily long
in this case. Otherwise, it is limited to sizeof(long).
+
+config BUSYBOX_CONFIG_FEATURE_TASKSET_CPULIST
+ bool "CPU list support (-c option)"
+ default BUSYBOX_DEFAULT_FEATURE_TASKSET_CPULIST
+ depends on BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY
+ help
+ Add support for taking/printing affinity as CPU list when '-c'
+ option is used. For example, it prints '0-3,7' instead of mask '8f'.
config BUSYBOX_CONFIG_UEVENT
bool "uevent (3.1 kb)"
default BUSYBOX_DEFAULT_UEVENT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
uevent is a netlink listener for kernel uevent notifications
sent via netlink. It is usually used for dynamic device creation.
config BUSYBOX_CONFIG_UMOUNT
bool "umount (5.1 kb)"
default BUSYBOX_DEFAULT_UMOUNT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
help
When you want to remove a mounted filesystem from its current mount
point, for example when you are shutting down the system, the
bool "unshare (7.2 kb)"
default BUSYBOX_DEFAULT_UNSHARE
depends on !BUSYBOX_CONFIG_NOMMU
- select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_LONG_OPTS
help
Run program with some namespaces unshared from parent.
bool "cramfs filesystem"
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_CRAMFS
depends on BUSYBOX_CONFIG_VOLUMEID
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EROFS
+ bool "erofs filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EROFS
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ Erofs is a compressed readonly filesystem for Linux.
config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXFAT
bool "exFAT filesystem"
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EXFAT
+++ /dev/null
-From d3539be8f27b8cbfdfee460fe08299158f08bcd9 Mon Sep 17 00:00:00 2001
-From: Alistair Francis <alistair.francis@wdc.com>
-Date: Tue, 19 Nov 2019 13:06:40 +0100
-Subject: Remove stime() function calls
-
-stime() has been deprecated in glibc 2.31 and replaced with
-clock_settime(). Let's replace the stime() function calls with
-clock_settime() in preperation.
-
-function old new delta
-rdate_main 197 224 +27
-clock_settime - 27 +27
-date_main 926 941 +15
-stime 37 - -37
-------------------------------------------------------------------------------
-(add/remove: 2/2 grow/shrink: 2/0 up/down: 69/-37) Total: 32 bytes
-
-Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
-Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
----
- coreutils/date.c | 6 +++++-
- libbb/missing_syscalls.c | 8 --------
- util-linux/rdate.c | 8 ++++++--
- 3 files changed, 11 insertions(+), 11 deletions(-)
-
---- a/coreutils/date.c
-+++ b/coreutils/date.c
-@@ -279,6 +279,9 @@ int date_main(int argc UNUSED_PARAM, cha
- time(&ts.tv_sec);
- #endif
- }
-+#if !ENABLE_FEATURE_DATE_NANO
-+ ts.tv_nsec = 0;
-+#endif
- localtime_r(&ts.tv_sec, &tm_time);
-
- /* If date string is given, update tm_time, and maybe set date */
-@@ -301,9 +304,10 @@ int date_main(int argc UNUSED_PARAM, cha
- if (date_str[0] != '@')
- tm_time.tm_isdst = -1;
- ts.tv_sec = validate_tm_time(date_str, &tm_time);
-+ ts.tv_nsec = 0;
-
- /* if setting time, set it */
-- if ((opt & OPT_SET) && stime(&ts.tv_sec) < 0) {
-+ if ((opt & OPT_SET) && clock_settime(CLOCK_REALTIME, &ts) < 0) {
- bb_perror_msg("can't set date");
- }
- }
---- a/libbb/missing_syscalls.c
-+++ b/libbb/missing_syscalls.c
-@@ -15,14 +15,6 @@ pid_t getsid(pid_t pid)
- return syscall(__NR_getsid, pid);
- }
-
--int stime(const time_t *t)
--{
-- struct timeval tv;
-- tv.tv_sec = *t;
-- tv.tv_usec = 0;
-- return settimeofday(&tv, NULL);
--}
--
- int sethostname(const char *name, size_t len)
- {
- return syscall(__NR_sethostname, name, len);
---- a/util-linux/rdate.c
-+++ b/util-linux/rdate.c
-@@ -95,9 +95,13 @@ int rdate_main(int argc UNUSED_PARAM, ch
- if (!(flags & 2)) { /* no -p (-s may be present) */
- if (time(NULL) == remote_time)
- bb_error_msg("current time matches remote time");
-- else
-- if (stime(&remote_time) < 0)
-+ else {
-+ struct timespec ts;
-+ ts.tv_sec = remote_time;
-+ ts.tv_nsec = 0;
-+ if (clock_settime(CLOCK_REALTIME, &ts) < 0)
- bb_perror_msg_and_die("can't set time of day");
-+ }
- }
-
- if (flags != 1) /* not lone -s */
--- /dev/null
+--- a/libbb/update_passwd.c
++++ b/libbb/update_passwd.c
+@@ -48,7 +48,7 @@ static void check_selinux_update_passwd(
+ bb_simple_error_msg_and_die("SELinux: access denied");
+ }
+ if (ENABLE_FEATURE_CLEAN_UP)
+- freecon(context);
++ freecon(seuser);
+ }
+ #else
+ # define check_selinux_update_passwd(username) ((void)0)
+++ /dev/null
---- a/Makefile.flags
-+++ b/Makefile.flags
-@@ -51,7 +51,7 @@ CFLAGS += $(call cc-option,-fno-builtin-
- # -fno-guess-branch-probability: prohibit pseudo-random guessing
- # of branch probabilities (hopefully makes bloatcheck more stable):
- CFLAGS += $(call cc-option,-fno-guess-branch-probability,)
--CFLAGS += $(call cc-option,-funsigned-char -static-libgcc,)
-+CFLAGS += $(call cc-option,-funsigned-char,)
- CFLAGS += $(call cc-option,-falign-functions=1 -falign-jumps=1 -falign-labels=1 -falign-loops=1,)
- # Defeat .eh_frame bloat (gcc 4.6.3 x86-32 defconfig: 20% smaller busybox binary):
- CFLAGS += $(call cc-option,-fno-unwind-tables,)
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
-@@ -130,7 +130,7 @@ make-cmd = $(subst \#,\\\#,$(subst $$,$$
+@@ -131,7 +131,7 @@ make-cmd = $(subst \#,\\\#,$(subst $$,$$
#
if_changed = $(if $(strip $(filter-out $(PHONY),$?) \
$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
$(echo-cmd) $(cmd_$(1)); \
echo 'cmd_$@ := $(make-cmd)' > $(@D)/.$(@F).cmd)
-@@ -139,7 +139,7 @@ if_changed = $(if $(strip $(filter-out $
+@@ -140,7 +140,7 @@ if_changed = $(if $(strip $(filter-out $
if_changed_dep = $(if $(strip $(filter-out $(PHONY),$?) \
$(filter-out FORCE $(wildcard $^),$^) \
$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
$(echo-cmd) $(cmd_$(1)); \
scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(@D)/.$(@F).tmp; \
rm -f $(depfile); \
-@@ -150,5 +150,5 @@ if_changed_dep = $(if $(strip $(filter-o
+@@ -151,5 +151,5 @@ if_changed_dep = $(if $(strip $(filter-o
# and if so will execute $(rule_foo)
if_changed_rule = $(if $(strip $(filter-out $(PHONY),$?) \
$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
--- a/networking/udhcp/dhcpc.c
+++ b/networking/udhcp/dhcpc.c
-@@ -713,6 +713,7 @@ static int bcast_or_ucast(struct dhcp_pa
+@@ -712,6 +712,7 @@ static int bcast_or_ucast(struct dhcp_pa
static NOINLINE int send_discover(uint32_t xid, uint32_t requested)
{
struct dhcp_packet packet;
/* Fill in: op, htype, hlen, cookie, chaddr fields,
* random xid field (we override it below),
-@@ -730,6 +731,7 @@ static NOINLINE int send_discover(uint32
+@@ -729,6 +730,7 @@ static NOINLINE int send_discover(uint32
*/
add_client_options(&packet);
--- a/networking/udhcp/dhcpc.c
+++ b/networking/udhcp/dhcpc.c
-@@ -1416,6 +1416,12 @@ int udhcpc_main(int argc UNUSED_PARAM, c
+@@ -1415,6 +1415,12 @@ int udhcpc_main(int argc UNUSED_PARAM, c
/* silence "uninitialized!" warning */
unsigned timestamp_before_wait = timestamp_before_wait;
--- a/networking/udhcp/dhcpc.c
+++ b/networking/udhcp/dhcpc.c
-@@ -1126,7 +1126,6 @@ static void perform_renew(void)
+@@ -1125,7 +1125,6 @@ static void perform_renew(void)
client_data.state = RENEW_REQUESTED;
break;
case RENEW_REQUESTED: /* impatient are we? fine, square 1 */
--- a/Makefile.flags
+++ b/Makefile.flags
-@@ -134,6 +134,12 @@ else
- LDLIBS += m
- endif
+@@ -158,6 +158,12 @@ endif
+ # libm may be needed for dc, awk, ntpd
+ # librt may be needed for clock_gettime()
+# nslookup_lede might need the resolv library
+RESOLV_AVAILABLE := $(shell echo 'int main(void){res_init();return 0;}' >resolvtest.c; $(CC) $(CFLAGS) -include resolv.h -lresolv -o /dev/null resolvtest.c >/dev/null 2>&1 && echo "y"; rm resolvtest.c)
+++ /dev/null
---- a/coreutils/date.c
-+++ b/coreutils/date.c
-@@ -123,6 +123,7 @@
- //usage: IF_FEATURE_DATE_ISOFMT(
- //usage: "\n -D FMT Use FMT (strptime format) for -d TIME conversion"
- //usage: )
-+//usage: "\n -k Set Kernel timezone from localtime and exit"
- //usage: "\n"
- //usage: "\nRecognized TIME formats:"
- //usage: "\n hh:mm[:ss]"
-@@ -139,9 +140,8 @@
-
- #include "libbb.h"
- #include "common_bufsiz.h"
--#if ENABLE_FEATURE_DATE_NANO
--# include <sys/syscall.h>
--#endif
-+#include <sys/time.h>
-+#include <sys/syscall.h>
-
- enum {
- OPT_RFC2822 = (1 << 0), /* R */
-@@ -149,8 +149,9 @@ enum {
- OPT_UTC = (1 << 2), /* u */
- OPT_DATE = (1 << 3), /* d */
- OPT_REFERENCE = (1 << 4), /* r */
-- OPT_TIMESPEC = (1 << 5) * ENABLE_FEATURE_DATE_ISOFMT, /* I */
-- OPT_HINT = (1 << 6) * ENABLE_FEATURE_DATE_ISOFMT, /* D */
-+ OPT_KERNELTZ = (1 << 5), /* k */
-+ OPT_TIMESPEC = (1 << 6) * ENABLE_FEATURE_DATE_ISOFMT, /* I */
-+ OPT_HINT = (1 << 7) * ENABLE_FEATURE_DATE_ISOFMT, /* D */
- };
-
- #if ENABLE_LONG_OPTS
-@@ -162,6 +163,7 @@ static const char date_longopts[] ALIGN1
- /* "universal\0" No_argument "u" */
- "date\0" Required_argument "d"
- "reference\0" Required_argument "r"
-+ "set-kernel-tz\0" No_argument "k"
- ;
- #endif
-
-@@ -181,6 +183,8 @@ static void maybe_set_utc(int opt)
- int date_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
- int date_main(int argc UNUSED_PARAM, char **argv)
- {
-+ time_t tt;
-+ struct timezone tz;
- struct timespec ts;
- struct tm tm_time;
- char buf_fmt_dt2str[64];
-@@ -193,7 +197,7 @@ int date_main(int argc UNUSED_PARAM, cha
- char *isofmt_arg = NULL;
-
- opt = getopt32long(argv, "^"
-- "Rs:ud:r:"
-+ "Rs:ud:r:k"
- IF_FEATURE_DATE_ISOFMT("I::D:")
- "\0"
- "d--s:s--d"
-@@ -256,6 +260,31 @@ int date_main(int argc UNUSED_PARAM, cha
- if (*argv)
- bb_show_usage();
-
-+ /* Setting of kernel timezone was requested */
-+ if (opt & OPT_KERNELTZ) {
-+ tt = time(NULL);
-+ localtime_r(&tt, &tm_time);
-+
-+ /* workaround warp_clock() on first invocation */
-+ memset(&tz, 0, sizeof(tz));
-+ syscall(SYS_settimeofday, NULL, &tz);
-+
-+ memset(&tz, 0, sizeof(tz));
-+#ifdef __USE_MISC
-+ tz.tz_minuteswest = -(tm_time.tm_gmtoff / 60);
-+#else
-+ tz.tz_minuteswest = -(tm_time.__tm_gmtoff / 60);
-+#endif
-+
-+ if (syscall(SYS_settimeofday, NULL, &tz))
-+ {
-+ bb_perror_msg("can't set kernel time zone");
-+ return EXIT_FAILURE;
-+ }
-+
-+ return EXIT_SUCCESS;
-+ }
-+
- /* Now we have parsed all the information except the date format
- * which depends on whether the clock is being set or read */
-
--- a/networking/traceroute.c
+++ b/networking/traceroute.c
-@@ -237,8 +237,8 @@
+@@ -236,8 +236,8 @@
//config: depends on TRACEROUTE || TRACEROUTE6
/* Needs socket(AF_INET, SOCK_RAW, IPPROTO_ICMP), therefore BB_SUID_MAYBE: */
--- a/loginutils/chpasswd.c
+++ b/loginutils/chpasswd.c
-@@ -97,6 +97,11 @@ int chpasswd_main(int argc UNUSED_PARAM,
+@@ -89,6 +89,11 @@ int chpasswd_main(int argc UNUSED_PARAM,
crypt_make_pw_salt(salt, algo);
free_me = pass = pw_encrypt(pass, salt, 0);
/* This is rather complex: if user is not found in /etc/shadow,
--- a/loginutils/cryptpw.c
+++ b/loginutils/cryptpw.c
-@@ -95,7 +95,7 @@ int cryptpw_main(int argc UNUSED_PARAM,
+@@ -87,7 +87,7 @@ int cryptpw_main(int argc UNUSED_PARAM,
/* Supports: cryptpw -m sha256 PASS 'rounds=999999999$SALT' */
char salt[MAX_PW_SALT_LEN + sizeof("rounds=999999999$")];
char *salt_ptr;
const char *opt_m, *opt_S;
int fd;
-@@ -140,8 +140,12 @@ int cryptpw_main(int argc UNUSED_PARAM,
+@@ -132,8 +132,12 @@ int cryptpw_main(int argc UNUSED_PARAM,
/* may still be NULL on EOF/error */
}
+++ /dev/null
---- a/networking/ntpd.c
-+++ b/networking/ntpd.c
-@@ -2414,9 +2414,6 @@ static NOINLINE void ntp_init(char **arg
-
- srand(getpid());
-
-- if (getuid())
-- bb_error_msg_and_die(bb_msg_you_must_be_root);
--
- /* Set some globals */
- G.discipline_jitter = G_precision_sec;
- G.stratum = MAXSTRAT;
projects / openwrt / openwrt.git / commitdiff